Tag Archives: energy-efficiency

Make your carbon atoms stand taller to improve electronic devices

Scientists from Ireland ((Tyndall National Institute at University College Cork [UCC]) and Singapore (National University of Singapore [NUS]) have jointly published a paper about how they achieved a ten-fold increase in the switching efficiency of electronic devices by changing one carbon atom. From the Jan. 21, 2013 news item on ScienceDaily,

These devices could provide new ways to combat overheating in mobile phones and laptops, and could also aid in electrical stimulation of tissue repair for wound healing.

The breakthrough creation of molecular devices with highly controllable electrical properties will appear in the February [2013] issue of Nature Nanotechnology. Dr. Damien Thompson at the Tyndall National Institute, UCC and a team of researchers at the National University of Singapore led by Prof. Chris Nijhuis designed and created the devices, which are based on molecules acting as electrical valves, or diode rectifiers.

Dr. Thompson explains, “These molecules are very useful because they allow current to flow through them when switched ON and block current flow when switched OFF. The results of the study show that simply adding one extra carbon is sufficient to improve the device performance by more than a factor of ten. We are following up lots of new ideas based on these results, and we hope ultimately to create a range of new components for electronic devices.” Dr. Thompson’s atom-level computer simulations showed how molecules with an odd number of carbon atoms stand straighter than molecules with an even number of carbon atoms. This allows them to pack together more closely. Tightly-packed assemblies of these molecules were formed on metal electrode surfaces by the Nijhuis group in Singapore and were found to be remarkably free of defects. These high quality devices can suppress leakage currents and so operate efficiently and reliably. The device can be cleanly switched on and off purely on the basis of the charge and shape of the molecules, just like in the biological nanomachines that regulate photosynthesis, cell division and tissue growth.

The Jan. ??, 2013 University College Cork news release, which originated the news item, provides more details,

The combined experiments and simulations show for the first time that minute improvements in molecule orientation and packing trigger changes in van der Waals forces that are sufficiently large to dramatically improve the performance of electronic devices. Dr. Thompson explains: “These van der Waals forces are the weakest of all intermolecular forces and only become significant when summed over large areas. Hence, up until now, the majority of research into ultra-small devices has used stronger “pi-pi” interactions to stick molecules together, and has ignored the much weaker, but ubiquitous, van der Waals interactions. The present study shows how van der Waals effects, which are present in every conceivable molecular scale device, can be tuned to optimise the performance of the device.”

The devices are based on molecules that act as diodes by allowing current to pass through them when operated at forward bias and blocking current when the bias is reversed. Molecular rectifiers were first proposed back in 1974, and advances in scientific computing have allowed molecular‐level design to be used over the past decade to develop new organic materials that provide better electrical responses. However, the relative importance of the interactions between the molecules, the nature of the molecule-metal contact and the influence of environmental effects have been questioned. This new research demonstrates that dramatic improvements in device performance may be achieved by controlling the van der Waals forces that pack the molecules together. Simply changing the number of carbon atoms by one provides significantly more stable and more reproducible devices that exhibit an order of magnitude improvement in ON/OFF ratio. The research findings demonstrate the feasibility of boosting device performances by creating tighter seals between molecules.

Here a citation and a link to the paper,

The role of van der Waals forces in the performance of molecular diodes by Nisachol Nerngchamnong, Li Yuan, Dong-Chen Qi, Jiang Li, Damien Thompson, & Christian A. Nijhuis. Nature Nanotechnology (2013) doi:10.1038/nnano.2012.238 Advance online publication: Jan. 6, 2013.

This paper is behind a paywall.

US soldiers get batteries woven into their clothes

Last time I wrote about soldiers, equipment, and energy-efficiency (April 5, 2012 posting) the soldiers in question were British. Today’s posting focuses on US soldiers. From the May 7, 2012 news item on Nanowerk,

U.S. soldiers are increasingly weighed down by batteries to power weapons, detection devices and communications equipment. So the Army Research Laboratory has awarded a University of Utah-led consortium almost $15 million to use computer simulations to help design materials for lighter-weight, energy efficient devices and batteries.

“We want to help the Army make advances in fundamental research that will lead to better materials to help our soldiers in the field,” says computing Professor Martin Berzins, principal investigator among five University of Utah faculty members who will work on the project. “One of Utah’s main contributions will be the batteries.”

Of the five-year Army grant of $14,898,000, the University of Utah will retain $4.2 million for research plus additional administrative costs. The remainder will go to members of the consortium led by the University of Utah, including Boston University, Rensselaer Polytechnic Institute, Pennsylvania State University, Harvard University, Brown University, the University of California, Davis, and the Polytechnic University of Turin, Italy.

The new research effort is based on the idea that by using powerful computers to simulate the behavior of materials on multiple scales – from the atomic and molecular nanoscale to the large or “bulk” scale – new, lighter, more energy efficient power supplies and materials can be designed and developed. Improving existing materials also is a goal.

“We want to model everything from the nanoscale to the soldier scale,” Berzins says. “It’s virtual design, in some sense.”

“Today’s soldier enters the battle space with an amazing array of advanced electronic materials devices and systems,” the University of Utah said in its grant proposal. “The soldier of the future will rely even more heavily on electronic weaponry, detection devices, advanced communications systems and protection systems. Currently, a typical infantry soldier might carry up to 35 pounds of batteries in order to power these systems, and it is clear that the energy and power requirements for future soldiers will be much greater.” [emphasis mine]

“These requirements have a dramatic adverse effect on the survivability and lethality of the soldier by reducing mobility as well as the amount of weaponry, sensors, communication equipment and armor that the soldier can carry. Hence, the Army’s desire for greater lethality and survivability of its men and women in the field is fundamentally tied to the development of devices and systems with increased energy efficiency as well as dramatic improvement in the energy and power density of [battery] storage and delivery systems.”

Up to 35 lbs. of batteries? I’m trying to imagine what the rest of the equipment would weigh. In any event, they seem to be more interested in adding to the weaponry than reducing weight. At least, that’s how I understand “greater *lethality.” Nice of them to mention greater survivability too.

The British project is more modest, they are weaving e-textiles that harvest energy allowing British soldiers to carry fewer batteries. I believe field trials were scheduled for May 2012.

* Correction: leathility changed to lethality on July 31, 2013.