Tag Archives: English ivy

Spider glue

Caption: An orb spider, glue-maker extraordinaire, at work on a web. Credit: The University of Akron

Scientists are taking inspiration from spiders in their quest to develop better adhesives. (Are they abandoning the gecko? Usually when scientists study adhesiveness, there’s talk of geckos. From a June 5, 2018 news item on ScienceDaily,

Ever wonder why paint peels off the wall during summer’s high humidity? It’s the same reason that bandages separate from skin when we bathe or swim.

Interfacial water, as it’s known, forms a slippery and non-adhesive layer between the glue and the surface to which it is meant to stick, interfering with the formation of adhesive bonds between the two.

Overcoming the effects of interfacial water is one of the challenges facing developers of commercial adhesives.

To find a solution, researchers at The University of Akron (UA) are looking to one of the strongest materials found in nature: spider silk.

The sticky glue that coats the silk threads of spider webs is a hydrogel, meaning it is full of water. One would think, then, that spiders would have difficulty catching prey, especially in humid conditions — but they do not. In fact, their sticky glue, which has been a subject of intensive research for years, is one of the most effective biological glues in all of nature.

A June 4, 2018 University of Akron news release (also on EurekAlert published on June 5, 2018), which originated the news item, provides more detail,

So how is spider glue able to stick in highly humid conditions?

That question was the subject of investigation by UA graduate students Saranshu Singla, Gaurav Amarpuri and Nishad Dhopatkar, who have been working with Dr. Ali Dhinojwala, interim dean of the College of Polymer Science and Polymer Engineering, and Dr. Todd Blackledge, professor of biology in the Integrated Bioscience program. Both professors are principal investigators in UA’s Biomimicry Research Innovation Center [BRIC], which specializes in emulating biological forms, processes, patterns and systems to solve technical challenges.

The team’s findings, which may provide the clue to developing stronger commercial adhesives, can be read in a paper recently published in the journal Nature Communications.

Singla and her colleagues set out to examine the secret behind the success of the common orb spider (Larinioides cornutus) glue and uncover how it overcomes the primary obstacle of achieving good adhesion in the humid conditions where water could be present between the glue and the target surface.

To investigate the processes involved, the team took orb spider glue, set it on sapphire substrate, then examined it using a combination of interface-sensitive spectroscopy and infrared spectroscopy.

Spider glue is made of three elements: two specialized glycoproteins, a collection of low molecular mass organic and inorganic compounds (LMMCs), and water. The LMMCs are hygroscopic (water-attracting), which keeps the glue soft and tacky to stick.

Singla and her team discovered that these glycoproteins act as primary binding agents to the surface. Glycoprotein-based glues have been identified in several other biological glues, such as fungi, algae, diatoms, sea stars, sticklebacks and English ivy.

But why doesn’t the water present in the spider glue interfere with the adhesive contact the way it does with most synthetic adhesives?

The LMMCs, the team concluded, perform a previously unknown function of sequestering interfacial water, preventing adhesive failure.

Singla and colleagues determined that it is the interaction of glycoproteins and LMMCs that governs the adhesive quality of the glue produced, with the respective proportions varying across species, thus optimizing adhesive strength to match the relative humidity of spider habitat.

“The hygroscopic compounds – known as water-absorbers – in spider glue play a previously unknown role in moving water away from the boundary, thereby preventing failure of spider glue at high humidity,” explained Singla.

The ability of the spider glue to overcome the problem of interfacial water by effectively absorbing it is the key finding of the research, and the one with perhaps the strongest prospect for commercial development.

“Imagine a paint that is guaranteed for life, come rain or shine,” Singla remarked.

All thanks to your friendly neighborhood spider glue.

Here’s a link to and a citation for the paper,

Hygroscopic compounds in spider aggregate glue remove interfacial water to maintain adhesion in humid conditions by Saranshu Singla, Gaurav Amarpuri, Nishad Dhopatkar, Todd A. Blackledge, & Ali Dhinojwala. Nature Communicationsvolume 9, Article number: 1890 (2018) Published 22 May 2018 DOI: https://doi.org/10.1038/s41467-018-04263-z

This paper is open access.

Effective sunscreens from nature

The dream is to find sunscreens that don’t endanger humans or pollute the environment and it seems that Spanish scientists may have taken a step closer to making that dream a reality (from a Jan. 30, 2017 Wiley Publications press release (also on EurekAlert),

The ideal sunscreen should block UVB and UVA radiation while being safe and stable. In the journal Angewandte Chemie, Spanish scientists have introduced a new family of UVA and UVB filters based on natural sunscreen substances found in algae and cyanobacteria. They are highly stable and enhance the effectivity [sic] of commercial sunscreens.

Good news for sunseekers. Commercial [sic] available sunscreen lotions can very effectively protect from dangerous radiation in the ultraviolet [spectrum], but they need to be applied regularly and in high amounts to develop their full potential. One of the most critical issues is the limited stability of the UV filter molecules. Inspired by nature, Diego Sampedro and his colleagues from La Rioja University in Logrono and collaborators from Malaga University and Alcala University, Madrid, Spain, have screened a natural class of UV-protecting [blocking?] molecules for their possible use in skin protection. They adjusted the nature-given motif [sic] to the requirements of chemical synthesis and found that the molecules could indeed boost the sun protection factor of common formulations.

The natural sunscreen molecules are called microsporine-like amino acids (MAAs) and are widespread in the microbial world, most prominently in marine algae and cyanobacteria. MAAs are small molecules derived from amino acids, thermally stable, and they absorb light in the ultraviolet region, protecting the microbial DNA from radiation damage. Thus they are natural sunscreens, which inspired Sampedro and his colleagues to create [a] new class of organic sunscreen compounds.

Theoretical calculations revealed what is chemically needed for a successful design. “We performed a computer calculation of several basic scaffolds [..] to identify the simplest compound that fulfills the requisites for efficient sunscreens”, the authors write. The result of their search was a set of molecules which were readily synthesized, “avoiding the decorating substituents that come from the biosynthetic route.” Thus the small basic molecules can be tuned to give them more favorable properties.

The authors found that the synthesized compounds are characterized by excellent filter capacities in the relevant UV range. In addition they are photostable, much more than, for example, oxybenzene [sic] which is a widely used sunscreen in commercial formulations. They do not react chemically and dissipate radiation as heat (but not to such an extent that the skin temperature would rise as well). And, most importantly, when tested in real formulations, the sun protection factor (SPF) rose by a factor of more than two. Thus they could be promising targets for more stable, more efficient sunscreen lotions. Good news for your next summer vacation.

There’s some unusual phrasing so, I’m guessing that the writer it not accustomed to writing press releases in English. One other comment, it’s oxybenzone that’s often used as an ingredient in commercial sunscreens.

Here’s a link to and a citation for the paper,

Rational Design and Synthesis of Efficient Sunscreens To Boost the Solar Protection Factor by Raúl Losantos, Ignacio Funes-Ardoiz, Dr. José Aguilera, Prof. Enrique Herrera-Ceballos, Dr. Cristina García-Iriepa, Prof. Pedro J. Campos, and Diego Sampedro. Angewandte Chemie International Edition Volume 56, Issue 10, pages 2632–2635, March 1, 2017 DOI: 10.1002/anie.201611627 Version of Record online: 27 JAN 2017

© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

This paper is behind a paywall.

I have previously featured work on another natural sunscreen. In that case it was to be derived from English ivy (July 22, 2010 posting); there was an update on the English ivy work in a May 30, 2016 posting but the researcher has moved in a different direction looking at wound healing and armour as possible applications for the research.

English ivy’s stickiness may be useful

Researchers have discovered the secret to English ivy’s stickiness and they hope that secret will lead to improved wound healing and more according to a May 24, 2016 news item on Nanowerk,

English ivy’s natural glue might hold the key to new approaches to wound healing, stronger armor for the military and maybe even cosmetics with better staying power.

New research from The Ohio State University illuminates the tiny particles responsible for ivy’s ability to latch on so tight to trees and buildings that it can withstand hurricanes and tornadoes. (Not to mention infuriate those trying to rid their homes of the vigorous green climber.)

The researchers pinpointed the spherical particles within English ivy’s adhesive and identified the primary protein within them.

A May 23, 2016 Ohio State University news release (also on EurekAlert) by Misti Crane, which originated the news item, expands on the theme,

“By understanding the proteins that give rise to ivy’s strength, we can give rise to approaches to engineer new bio-inspired adhesives for medical and industry products,” said Mingjun Zhang, the biomedical engineering professor who led the work.

“It’s a milestone to resolve this mystery. We now know the secret of this adhesive and the underlying molecular mechanism,” said Zhang, who focuses his work on finding answers in nature for vexing problems in medicine.

“Ivy has these very tiny hairy structures that have a wonderful interaction with the surface as the plant climbs. One day I was looking at the ivy in the backyard and I was amazed at the force,” Zhang said.Like many scientists before him, Charles Darwin among them, Zhang found himself captivated by English ivy – the physics of it, the sheer strength of it. The study appears today in the journal Proceedings of the National Academy of Sciences.

“It’s very difficult to tear down, even in a natural disaster. It’s one of the strongest adhesive forces in nature.”

When he and his team took a look at the ivy’s glue with a powerful atomic-force microscope, they were able to identify a previously unknown element in its adhesive.

Zhang said particles rich in those proteins have exceptional adhesive abilities – abilities that could be used to the advantage of many, from biomedical engineers to paint makers.The tiny particles inside the glue on their laboratory slides turned out to be primarily made up of arabinogalactan proteins. And when the scientists investigated further, they discovered that the driving force behind the curing of the glue was a calcium-mediated interaction between the proteins and pectin in the gelatinous liquid that oozes from ivy as it climbs.

Zhang, a member of Ohio State’s Davis Heart and Lung Research Institute, is particularly interested in bioadhesives that could aid in wound healing after injury or surgeries. Others, notably the U.S. military, are interested in surface-coating applications for purposes that include strengthening armor systems, he said.

Many plants are excellent climbers, but scientists have had limited information about the adhesives that enable those plants to affix themselves to walls, fences and just about anything in their way, he said.

“When climbing, ivy secretes these tiny nanoparticles which make initial surface contact. Due to their high uniformity and low viscosity, they can attach to large areas on various surfaces,” Zhang said.

After the water evaporates, a chemical bond forms, Zhang said.

“It’s really a nature-made amazing mechanism for high-strength adhesion,” he said.

The glue doesn’t just sit on the surface of the object that the ivy is clinging to, he said. It finds its way into openings invisible to the naked eye, further solidifying its bond.

To confirm what they found, Zhang and his collaborators used the nanoparticles to reconstruct a simple glue that mimics ivy adhesive. Advanced bioadhesives based on this research will take more time and research.

In addition to its strength, ivy adhesive has other properties that make it appealing to scientists looking for answers to engineering quandaries, Zhang said.

“Under moisture or high or low temperatures, it’s not easily damaged,” he said. “Ivy is very resistant to various environmental conditions, which makes the adhesive a particularly interesting candidate for the development of armor coatings.”

Ivy also is considered a pest because it can be destructive to buildings and bridges. Knowing what’s at the heart of its sticking ability could help scientists unearth approaches to resist the plant, Zhang said.

Zhang and his work have been featured here before in a Jan. 7, 2013 posting about flesh-eating fungus and in a July 22, 2010 posting about English ivy and sunscreens.

Here’s a link to and a citation for Zhang’s latest paper,

Nanospherical arabinogalactan proteins are a key component of the high-strength adhesive secreted by English ivy by Yujian Huang, Yongzhong Wang, Li Tan, Leming Sun, Jennifer Petrosino, Mei-Zhen Cui, Feng Hao, and Mingjun Zhang. PNAS [Proceedings of the National Academy of Sciences] 2016 doi: 10.1073/pnas.1600406113 Published ahead of print May 23, 2016,

This paper is behind a paywall.