Tag Archives: ENM

Better hair dyes with graphene and a cautionary note

Beauty products aren’t usually the first applications that come to mind when discussing graphene or any other research and development (R&D) as I learned when teaching a course a few years ago. But research and development  in that field are imperative as every company is scrambling for a short-lived competitive advantage for a truly new products or a perceived competitive advantage in a field where a lot of products are pretty much the same.

This March 15, 2018 news item on ScienceDaily describes graphene as a potential hair dye,

Graphene, a naturally black material, could provide a new strategy for dyeing hair in difficult-to-create dark shades. And because it’s a conductive material, hair dyed with graphene might also be less prone to staticky flyaways. Now, researchers have put it to the test. In an article published March 15 [2018] in the journal Chem, they used sheets of graphene to make a dye that adheres to the surface of hair, forming a coating that is resistant to at least 30 washes without the need for chemicals that open up and damage the hair cuticle.

Courtesy: Northwestern University

A March 15, 2018 Cell Press news release on EurekAlert, which originated the news item, fills in more the of the story,

Most permanent hair dyes used today are harmful to hair. “Your hair is covered in these cuticle scales like the scales of a fish, and people have to use ammonia or organic amines to lift the scales and allow dye molecules to get inside a lot quicker,” says senior author Jiaxing Huang, a materials scientist at Northwestern University. But lifting the cuticle makes the strands of the hair more brittle, and the damage is only exacerbated by the hydrogen peroxide that is used to trigger the reaction that synthesizes the dye once the pigment molecules are inside the hair.

These problems could theoretically be solved by a dye that coats rather than penetrates the hair. “However, the obvious problem of coating-based dyes is that they tend to wash out very easily,” says Huang. But when he and his team coated samples of human hair with a solution of graphene sheets, they were able to turn platinum blond hair black and keep it that way for at least 30 washes–the number necessary for a hair dye to be considered “permanent.”

This effectiveness has to do with the structure of graphene: it’s made of up thin, flexible sheets that can adapt to uneven surfaces. “Imagine a piece of paper. A business card is very rigid and doesn’t flex by itself. But if you take a much bigger sheet of newspaper–if you still can find one nowadays–it can bend easily. This makes graphene sheets a good coating material,” he says. And once the coating is formed, the graphene sheets are particularly good at keeping out water during washes, which keeps the water from eroding both the graphene and the polymer binder that the team also added to the dye solution to help with adhesion.

The graphene dye has additional advantages. Each coated hair is like a little wire in that it is able to conduct heat and electricity. This means that it’s easy for graphene-dyed hair to dissipate static electricity, eliminating the problem of flyaways on dry winter days. The graphene flakes are large enough that they won’t absorb through the skin like other dye molecules. And although graphene is typically black, its precursor, graphene oxide, is light brown. But the color of graphene oxide can be gradually darkened with heat or chemical reactions, meaning that this dye could be used for a variety of shades or even for an ombre effect.

What Huang thinks is particularly striking about this application of graphene is that it takes advantage of graphene’s most obvious property. “In many potential graphene applications, the black color of graphene is somewhat undesirable and something of a sore point,” he says. Here, though, it’s applied to a field where creating dark colors has historically been a problem.

The graphene used for hair dye also doesn’t need to be of the same high quality as it does for other applications. “For hair dye, the most important property is graphene being black. You can have graphene that is too lousy for higher-end electronic applications, but it’s perfectly okay for this. So I think this application can leverage the current graphene product as is, and that’s why I think that this could happen a lot sooner than many of the other proposed applications,” he says.

Making it happen is his next goal. He hopes to get funding to continue the research and make these dyes a reality for the people whose lives they would improve. “This is an idea that was inspired by curiosity. It was very fun to do, but it didn’t sound very big and noble when we started working on it,” he says. “But after we deep-dived into studying hair dyes, we realized that, wow, this is actually not at all a small problem. And it’s one that graphene could really help to solve.”

Northwestern University’s Amanda Morris also wrote a March 15, 2018 news release (it’s repetitive but there are some interesting new details; Note: Links have been removed),

It’s an issue that has plagued the beauty industry for more than a century: Dying hair too often can irreparably damage your silky strands.

Now a Northwestern University team has used materials science to solve this age-old problem. The team has leveraged super material graphene to develop a new hair dye that is less harmful [emphasis mine], non-damaging and lasts through many washes without fading. Graphene’s conductive nature also opens up new opportunities for hair, such as turning it into in situ electrodes or integrating it with wearable electronic devices.

Dying hair might seem simple and ordinary, but it’s actually a sophisticated chemical process. Called the cuticle, the outermost layer of a hair is made of cells that overlap in a scale-like pattern. Commercial dyes work by using harsh chemicals, such as ammonia and bleach, to first pry open the cuticle scales to allow colorant molecules inside and then trigger a reaction inside the hair to produce more color. Not only does this process cause hair to become more fragile, some of the small molecules are also quite toxic.

Huang and his team bypassed harmful chemicals altogether by leveraging the natural geometry of graphene sheets. While current hair dyes use a cocktail of small molecules that work by chemically altering the hair, graphene sheets are soft and flexible, so they wrap around each hair for an even coat. Huang’s ink formula also incorporates edible, non-toxic polymer binders to ensure that the graphene sticks — and lasts through at least 30 washes, which is the commercial requirement for permanent hair dye. An added bonus: graphene is anti-static, so it keeps winter-weather flyaways to a minimum.

“It’s similar to the difference between a wet paper towel and a tennis ball,” Huang explained, comparing the geometry of graphene to that of other black pigment particles, such as carbon black or iron oxide, which can only be used in temporary hair dyes. “The paper towel is going to wrap and stick much better. The ball-like particles are much more easily removed with shampoo.”

This geometry also contributes to why graphene is a safer alternative. Whereas small molecules can easily be inhaled or pass through the skin barrier, graphene is too big to enter the body. “Compared to those small molecules used in current hair dyes, graphene flakes are humongous,” said Huang, who is a member of Northwestern’s International Institute of Nanotechnology.

Ever since graphene — the two-dimensional network of carbon atoms — burst onto the science scene in 2004, the possibilities for the promising material have seemed nearly endless. With its ultra-strong and lightweight structure, graphene has potential for many applications in high-performance electronics, high-strength materials and energy devices. But development of those applications often require graphene materials to be as structurally perfect as possible in order to achieve extraordinary electrical, mechanical or thermal properties.

The most important graphene property for Huang’s hair dye, however, is simply its color: black. So Huang’s team used graphene oxide, an imperfect version of graphene that is a cheaper, more available oxidized derivative.

“Our hair dye solves a real-world problem without relying on very high-quality graphene, which is not easy to make,” Huang said. “Obviously more work needs to be done, but I feel optimistic about this application.”

Still, future versions of the dye could someday potentially leverage graphene’s notable properties, including its highly conductive nature.

“People could apply this dye to make hair conductive on the surface,” Huang said. “It could then be integrated with wearable electronics or become a conductive probe. We are only limited by our imagination.”

So far, Huang has developed graphene-based hair dyes in multiple shades of brown and black. Next, he plans to experiment with more colors.

Interestingly, the tiny note of caution”less harmful” doesn’t appear in the Cell Press news release. Never fear, Dr. Andrew Maynard (Director Risk Innovation Lab at Arizona State University) has written a March 20, 2018 essay on The Conversation suggesting a little further investigation (Note: Links have been removed),

Northwestern University’s press release proudly announced, “Graphene finds new application as nontoxic, anti-static hair dye.” The announcement spawned headlines like “Enough with the toxic hair dyes. We could use graphene instead,” and “’Miracle material’ graphene used to create the ultimate hair dye.”

From these headlines, you might be forgiven for getting the idea that the safety of graphene-based hair dyes is a done deal. Yet having studied the potential health and environmental impacts of engineered nanomaterials for more years than I care to remember, I find such overly optimistic pronouncements worrying – especially when they’re not backed up by clear evidence.

Tiny materials, potentially bigger problems

Engineered nanomaterials like graphene and graphene oxide (the particular form used in the dye experiments) aren’t necessarily harmful. But nanomaterials can behave in unusual ways that depend on particle size, shape, chemistry and application. Because of this, researchers have long been cautious about giving them a clean bill of health without first testing them extensively. And while a large body of research to date doesn’t indicate graphene is particularly dangerous, neither does it suggest it’s completely safe.

A quick search of scientific papers over the past few years shows that, since 2004, over 2,000 studies have been published that mention graphene toxicity; nearly 500 were published in 2017 alone.

This growing body of research suggests that if graphene gets into your body or the environment in sufficient quantities, it could cause harm. A 2016 review, for instance, indicated that graphene oxide particles could result in lung damage at high doses (equivalent to around 0.7 grams of inhaled material). Another review published in 2017 suggested that these materials could affect the biology of some plants and algae, as well as invertebrates and vertebrates toward the lower end of the ecological pyramid. The authors of the 2017 study concluded that research “unequivocally confirms that graphene in any of its numerous forms and derivatives must be approached as a potentially hazardous material.”

These studies need to be approached with care, as the precise risks of graphene exposure will depend on how the material is used, how exposure occurs and how much of it is encountered. Yet there’s sufficient evidence to suggest that this substance should be used with caution – especially where there’s a high chance of exposure or that it could be released into the environment.

Unfortunately, graphene-based hair dyes tick both of these boxes. Used in this way, the substance is potentially inhalable (especially with spray-on products) and ingestible through careless use. It’s also almost guaranteed that excess graphene-containing dye will wash down the drain and into the environment.

Undermining other efforts?

I was alerted to just how counterproductive such headlines can be by my colleague Tim Harper, founder of G2O Water Technologies – a company that uses graphene oxide-coated membranes to treat wastewater. Like many companies in this area, G2O has been working to use graphene responsibly by minimizing the amount of graphene that ends up released to the environment.

Yet as Tim pointed out to me, if people are led to believe “that bunging a few grams of graphene down the drain every time you dye your hair is OK, this invalidates all the work we are doing making sure the few nanograms of graphene on our membranes stay put.” Many companies that use nanomaterials are trying to do the right thing, but it’s hard to justify the time and expense of being responsible when someone else’s more cavalier actions undercut your efforts.

Overpromising results and overlooking risk

This is where researchers and their institutions need to move beyond an “economy of promises” that spurs on hyperbole and discourages caution, and think more critically about how their statements may ultimately undermine responsible and beneficial development of a technology. They may even want to consider using guidelines, such as the Principles for Responsible Innovation developed by the organization Society Inside, for instance, to guide what they do and say.

If you have time, I encourage you to read Andrew’s piece in its entirety.

Here’s a link to and a citation for the paper,

Multifunctional Graphene Hair Dye by Chong Luo, Lingye Zhou, Kevin Chiou, and Jiaxing Huang. Chem DOI: https://doi.org/10.1016/j.chempr.2018.02.02 Publication stage: In Press Corrected Proof

This paper appears to be open access.

*Two paragraphs (repetitions) were deleted from the excerpt of Dr. Andrew Maynard’s essay on August 14, 2018

A tool for ranking nanomaterial risks for the US military

Michael Berger in his Jan. 6, 2015 Nanowerk Spotlight article describes a new nanomaterial safety tool developed for the US military (Note: A link has been removed),

Military organizations around the world, especially in the U.S., have been quicker than most to appreciate the potential of nanotechnology. More money is being spent on nanotechnology research for military applications than for any other area (read more: Military nanotechnology – how worried should we be?).

Public releases about military nanotechnology research and development activities are full about sensors, batteries, wound care, filtration systems, smart fabrics, and lighter, stronger, heat-resistant nanocomposite materials etc. Naturally, nanomaterial safety has become an important issue for military organizations as well.

“Assessing the potential human health and environmental risks of engineered nanomaterials (ENMs) within the context of the applications and products in which they are incorporated continues to be an extremely challenging endeavor,”Khara D. Grieger, PhD, an Environmental Risk Assessor and research scientist at RTI International, tells Nanowerk. “Given the challenges of developing sufficient data that would be required for traditional risk assessment frameworks, risk assessors are continuing to refine their methods and techniques to perform risk assessments using combined quantitative and qualitative frameworks for ENMs, resulting in various alternatives for risk analysis.”

The use of risk ranking tools may be particularly advantageous to prioritize materials or products according to their risk potential, i.e., identify the ‘riskiest’ ENMs or nanotechnology products, for example, for further research or investigation. This may be useful especially in cases of resource and time constraints.

Here’s a graph, from Geiger’s paper, ranking various engineered nanomaterials (ENM),

©Springer Science+Business Media

©Springer Science+Business Media

Berger notes,

The scientific core of the paper focuses on the development and application of a relative risk ranking tool that ranks engineered nanomaterials as well as the applications in which they are embedded (in this case, Army materiel) relevant for worker or soldier health.

“The development of this tool is important because it not only takes into account the physicochemical characteristics of ENMs but also the characteristics of the equipment in which they are embedded, relevant for current, real-world scenarios involving ENMs,” explains Grieger. “The results from this work may be used to help prioritize additional research, such as in-depth risk evaluations or further nanotoxicological research pertaining to the highest ranked ENMs, materiel, or ENM–materiel pairs.”

She adds that the fundamental methodology and risk ranking algorithm developed in the ranking tools may be applicable to other occupational and environmental settings involving ENMs and therefore easily translated to other application scenarios.

I encourage you to read Berger’s article in its entirety. Also, here’s a link to and a citation for the paper,

A relative ranking approach for nano-enabled applications to improve risk-based decision making: a case study of Army materiel by Khara D. Grieger, Jennifer Hoponick Redmon, Eric S. Money, Mark W. Widder, William H. van der Schalie, Stephen M. Beaulieu, and Donna Womack. Environment Systems and Decisions December 2014 DOI 10.1007/s10669-014-9531-4

This paper is behind a paywall.

Deadline extension (travel grants and poster abstracts) for alternate testing strategies (ATS) of nanomaterials workshop

It seems there have been a couple of deadline extensions (to August 1, 2014) for the September 15-16, 2014 ‘Workshop to Explore How a Multiple Models Approach can Advance Risk Analysis of Nanoscale Materials’ in Washington, DC (first mentioned in my July 10, 2014 posting featuring a description of the workshop). You can go here to submit a poster abstract (from any country) and you can go here if you’re a student or young professional (from any country) in search of a $500 travel award.

I managed to speak to one of the organizers, Lorraine Sheremeta, (Assistant Director, Ingenuity Lab, University of Alberta and co-author a July 9, 2014 Nanowerk Spotlight article about the workshop). Lorraine (Lori) kindly spoke to me about the upcoming workshop, which she described as an academic conference,.

As I understand what she told me, the hosts for the September 15-16, 2014 Workshop to Explore How a Multiple Models Approach can Advance Risk Analysis of Nanoscale Materials in Washington, DC want to attract a multidisciplinary group of people to grapple with a few questions. First, they want to establish a framework for establishing which are the best test methods for nanomaterials. Second, they are trying to move away from animal testing and want to establish which methods are equal to or better than animal testing. Thirdly, they want to discuss what they are going to do with the toxicological data  that we have  been collecting on nanomaterials for years now.

Or, as she and her colleague from the Society of Risk Analysis (Jo Anne Shatkin) have put in it in their Nanowerk Spotlight article:

… develop a report on the State of the Science for ATS for nanomaterials, catalogue of existing and emerging ATS [alternate testing strategies] methods in a database; and develop a case study to inform workshop deliberations and expert recommendations

The collaborative team behind this event includes, the University of Alberta’s Ingenuity Lab, the Society for Risk Analysis, Environment Canada, Health Canada, and the Organization for Economic Co-operation and Development (OECD) Working Party on Manufactured Nanomaterials (WPMN) .

The speaker lineup isn’t settled at this time although they have confirmed Vicki Stone of Heriot-Watt University in Scotland (from her university bio page),

Vicki Stone, Professor of Toxicology, studies the effects of nanomaterials on humans and environmentally relevant species.  Current research projects investigate the mechanism of toxicity of a range of nanomaterials in cells of the immune system (macrophages and neutrophils), liver (hepatocytes) , gastrointestinal tract, blood vessels (endothelium) and lung.  She is interested in interactions between nanomaterials, proteins and lipids, and how this influences subsequent toxicity.  Current projects also develop in vitro alternatives using microfluidics as well as high resolution imaging of individual nanomaterials in 3D and over time.  In addition Vicki collaborates with ecotoxicologists to investigate the impacts of nanomaterials on aquatic organisms. Vicki coordinated a European project to identify the research priorities to develop an intelligent testing strategy for nanomaterials (www.its-nano.eu).

Vicki is Director of the Nano Safety Research Group at Heriot-Watt University, Edinburgh, and Director of Toxicology for SAFENANO (www.safenano.org). She has acted as the Editor-in-chief of the journal Nanotoxicology (http://informahealthcare.com/nan) for 6 years (2006-2011). Vicki has also published over 130 publications pertaining to particle toxicology over the last 16 years and has provided evidence for the government commissioned reports published by the Royal Society (2003) and the on Environmental Pollution (2008).  Vicki was previously a member of the UK Government Committee on the Medical Effects of Air Pollution (COMEAP) and an advisory board member for the Center for the Environmental Implications of NanoTechnology (CEINT; funded by the US Environmental Protection Agency)).

A representative from PETA (People for the Ethical Treatment of Animals) will also be speaking. I believe that will be Amy Clippinger (from the PETA website’s Regulatory Testing webpage; scroll down about 70% of the way),

Science adviser Amy Clippinger has a Ph.D. in cellular and molecular biology and genetics and several years of research experience at the University of Pennsylvania.

PETA representatives have been to at least one other conference on the topic of nano, toxicology, and animal testing as per my April 24, 2014 posting about NANOTOX 2014 in Turkey,

Writing about nanotechnology can lead you in many different directions such as the news about PETA (People for the Ethical Treatment of Animals) and its poster presentation at the NanoTox 2014 conference being held in Antalya, Turkey from April 23 – 26, 2014. From the April 22, 2014 PETA news release on EurekAlert,

PETA International Science Consortium Ltd.’s nanotechnology expert will present a poster titled “A tiered-testing strategy for nanomaterial hazard assessment” at the 7th International Nanotoxicology Congress [NanoTox 2014] to be held April 23-26, 2014, in Antalya, Turkey.

Dr. Monita Sharma will outline a strategy consistent with the 2007 report from the US National Academy of Sciences, “Toxicity Testing in the 21st Century: A Vision and a Strategy,” which recommends use of non-animal methods involving human cells and cell lines for mechanistic pathway–based toxicity studies.

There is a lot of interest internationally in improving how we test for toxicity of nanomaterials. As well, the drive to eliminate or minimize as much as possible the use of animals in testing seems to be gaining momentum.

Good luck to everyone submitting a poster abstract and/or an application for a travel grant!

In case you don’t want to scroll up, the SRA nano workshop website is here.

An upcoming alternate testing strategies (ATS) for nanomaterials workshop and the quest to reduce animal testing

It’s too late to announce a call for poster abstracts or travel awards but that still leaves the possibility of attending a September 15-16, 2014 Workshop to Explore How a Multiple Models Approach can Advance Risk Analysis of Nanoscale Materials in Washington, DC. In a July 9, 2014 Nanowerk Spotlight article,, Jo Anne Shatkin (President, Vireo Advisors) and Lorraine Sheremeta (Assistant Director, Ingenuity Lab, University of Alberta) tout the workshop in the context of describing new approaches to nanotoxicology research (Note: A link has been removed),

Engineered nanoscale materials (ENM or ‘nanomaterials’) offer the potential to create safer and more effective products through the use of smaller quantities of improved performance materials. Currently nanomaterials are used to improve the performance of life-saving drugs and medical technologies, to make renewable energy more efficient, to make value added products from industrial waste streams, to improve food, packaging, to lightweight materials used in transportation systems, and to improve many of the personal care products that we use every day. Nanomaterial manufacture and use is expected to increase over the coming years and despite the widespread use of nanomaterials in a variety of consumer products, we are only beginning to understand the impacts of these emerging materials on our health and the environment. To this end, the University of Alberta’s Ingenuity Lab is collaborating with the Society for Risk Analysis to evaluate the potential to use alternative test strategies (ATS) to improve our ability to assess nanomaterial toxicity and environmental impact.

Shatkin and Sheremeta describe toxicology tests and explain the importance of refining and improving these tests (from the article),

Standard in vivo toxicology test methods that depend heavily on the use of animals have long been used to assess chemical safety. [emphasis mine*] Existing and novel in vitro and in silico test methods provide important alternatives to in vivo animal testing for chemicals and potentially for ENM. Genotoxicity tests, for example, are used to assess the mutagenic potential of chemicals or nanomaterials in the replication of DNA in cells. Driven in part by increasing market and regulatory requirements for safer and more sustainable products, large international infrastructure has developed for creating, testing and validating in vitro test methods, and its use is expanding to chemical and nanomaterial assessment (NSF, 2007). The goals of reducing, refining and replacing animal testing (the commonly cited ‘three Rs’) – resonate with key and diverse stakeholders including animal rights groups, the bioethics community, the pharmaceutical industry, regulatory agencies and the broader public. [emphasis mine*]

Despite nearly a decade of effort in the conduct toxicology and exposure research to inform the assessment of health and environmental risks of nanomaterials, major gaps remain in the ability to understand and quantify risks. While there is now a large body of published data on carbon nanotubes and metal oxide nanoparticles, concern has been raised that speculation about nanomaterial risk has hardened into an assumption that there are ‘as-yet-to-be-discovered risks’ that we must identify and manage (Maynard, 2014) that demands extensive testing.

The authors describe ATS (alternative test strategies) in greater detail,

ATS approaches are regarded by many to have the potential for rapid screening of large numbers and types of materials. They can include a breadth of techniques including high throughput screening methods (HTS), high content screening, computational approaches, toxicogenomics, cell-based methods, in vitro assays and non-mammalian whole animal models. The emergence of ATS raises questions about how the results of these methods may be used for assessing the potential risks of ENM. For instance, ATS could be used in combination in a multiple models approach to evaluate new ENM in a number of rapid assays and compare with well-studied substances using in vivo testing; thereby identifying ENM for additional testing in a more strategic fashion than is possible through conventional testing approaches.

They also describe the current state of affairs with ATS,

In the United States, the U.S. ToxCast program has, as part of their 21st century toxicity screening program (NRC, 2007), tested 29 NMs with 62 in vitro test methods (Wang et al. 2013). Many researchers, including several from the University of Alberta, have proposed and developed ATS to include a variety of methods, some which are standardized for chemicals, and others which take advantage of developments including advanced biological mechanistic understanding, genomics, metabolomics, automation and informatics. However, these existing as well as emerging ATS have a short history with nanomaterials, and have not yet proven to be reliable for quantitative estimation of ENM risk. Still, several international efforts have developed ATS that have potential to be used for screening purposes, and to guide further testing priorities for regulatory decision making. The goal of the September [2014] workshop by the Society for Risk Analysis is to explore ways in which distinct ATS may be used for screening and prioritizing the need for more extensive testing of novel ENM.

The parties (including the authors of the article) involved in developing this risk workshop are listed, also mentioned are members of the international testing scene,

Lori Sheremeta, the Assistant Director of Ingenuity Lab in Edmonton Alberta and past Chair of the Society for Risk Analysis (SRA) Emerging Nanoscale Materials Specialty Group (ENMSG), is collaborating with U.S.-based nanomaterials risk expert Jo Anne Shatkin (an SRA Councilor and co-founder of the SRA ENMSG), Environment Canada, Health Canada, the SRA ENMSG and others on a Pilot Project with the Organization for Economic Co-operation and Development (OECD) Working Party on Manufactured Nanomaterials (WPMN) to develop a report on the State of the Science for ATS for nanomaterials, catalogue of existing and emerging ATS methods in a database; and develop a case study to inform workshop deliberations and expert recommendations.

There are many international efforts to develop, as well as to validate and standardize, these methods for chemicals, including organizations such as the US National Toxicology Program Interagency Center for the Evaluation of Alternative Toxicological Methods (ICCVAM), the European Union Reference Laboratory European Centre for the Validation of Alternative Methods (EURL ECVAM), the Japanese Center for the Validation of Alternative Methods (JacVAM), the Korean Centre for the Validation of Alternative Methods (KoCVAM) and the OECD. There is wide recognition that the diversity of NMs renders it impractical to use traditional animal testing to evaluate safety, hence there is significant interest in assessing the performance of both existing and emerging alternative testing strategies for NMs. Further, the EU directive REACH (Directive 2006/121/EC) requires replacing in vivo testing, and there is widespread popular agreement about the desire to limit animal testing. Finally, there is a need for more biologically informative toxicology methods (Hartung, 2010; Silbergeld et al, 2011; Landsiedel et al, 2009).

A list of the workshop objectives is offered  in the article,

The main objectives of the workshop are to:

assess the state of the science on HTS and ATS from a ‘multiple models’ perspective to identify areas of common findings from differing approaches, areas of greatest uncertainty, and priorities for follow up in applied research toward risk assessment of ENM;
evaluate the ability to use data from ATS/HTS methods for screening purposes – combining suites of assays and comparing well-studied substances to novel ones;

assess the ability to use a suite of ATS methods to amplify the Weight of Evidence;

characterize uncertainty associated with predictive relationships and propose strategies to address uncertainties;

elicit the perspectives of diverse stakeholders about the use of HTS/ATS for screening purposes in risk analysis of ENM; and

develop a set of recommendations for these alternative approaches to become more widely adopted for environmental, health and safety decision making about ENM across the product life cycle. The output of the workshop holds potential for transformation through risk screening approaches that promote safer and more sustainable material and technology development.

You can find more about the September 15-16, 2014 Workshop to Explore How a Multiple Models Approach can Advance Risk Analysis of Nanoscale Materials in Washington, DC here.

The text in the article is a bit rough. Some of the ideas and topics don’t follow each other logically. So, be prepared to spend a little time reading, Happily, there are references included with the article.

I last mentioned Jo Anne Shatkin here in the context of a 2013 paper on alternative test strategies (ATS) in an Aug. 22, 2013 posting. I think the most recent mention of Lorraine Sheremeta here is in a Jan. 11, 2010 posting about Canada, nanotechnology, and food.

Final note, I am hoping to get some more information about the workshop and ATS scene from Lorraine Sheremeta to be published in a subsequent posting.

* I added the emphases at 0830 hours PDT July 10, 2014.

Nanomaterials, toxicology, and alternatives to animal testing

It seems that alternatives to animal testing may offer some additional capabilities for nanotoxicology studies according to an Aug. 21, 2013 news item on Nanowerk,

A group of international experts from government, industry and academia have concluded that alternative testing strategies (ATSs) that don’t rely on animals will be needed to cope with the wave of new nanomaterials emerging from the boom in nanoscience and nanotechnology. …

… Tests on laboratory mice, rats and other animals have been the standard way of checking new materials for health and environmental effects. Since those tests are costly, labor-intensive and time-consuming, workshop participants considered whether ATSs could have a larger role in checking the safety of ENMs [engineered nanomaterials].

They concluded that rapid cellular screening, computer modeling and other ATSs could serve as quick, cost-effective and reliable approaches for gathering certain types of information about the health and environmental effects of ENMs. “After lively discussions, a short list of generally shared viewpoints on this topic was generated, including a general view that ATS approaches for ENMs can significantly benefit chemical safety analysis,” they say.

The experts have had their consensus statement from the workshop published and before offering a citation for and a link to the statement, here’s the Abstract,

There has been a conceptual shift in toxicological studies from describing what happens to explaining how the adverse outcome occurs, thereby enabling a deeper and improved understanding of how biomolecular and mechanistic profiling can inform hazard identification and improve risk assessment. Compared to traditional toxicology methods, which have a heavy reliance on animals, new approaches to generate toxicological data are becoming available for the safety assessment of chemicals, including high-throughput and high-content screening (HTS, HCS). With the emergence of nanotechnology, the exponential increase in the total number of engineered nanomaterials (ENMs) in research, development, and commercialization requires a robust scientific approach to screen ENM safety in humans and the environment rapidly and efficiently. Spurred by the developments in chemical testing, a promising new toxicological paradigm for ENMs is to use alternative test strategies (ATS), which reduce reliance on animal testing through the use of in vitro and in silico methods such as HTS, HCS, and computational modeling. Furthermore, this allows for the comparative analysis of large numbers of ENMs simultaneously and for hazard assessment at various stages of the product development process and overall life cycle. [emphasis mine] Using carbon nanotubes as a case study, a workshop bringing together national and international leaders from government, industry, and academia was convened at the University of California, Los Angeles, to discuss the utility of ATS for decision-making analyses of ENMs. …

It seems that ATS has opened the door to more comprehensive testing (as per life cycles) than has previously been possible.

For the curious, here’s the citation for and the link to the published paper,

A Multi-Stakeholder Perspective on the Use of Alternative Test Strategies for Nanomaterial Safety Assessment by Andre E. Nel, Elina Nasser, Hilary Godwin, David Avery, Tina Bahadori, Lynn Bergeson #, Elizabeth Beryt, James C. Bonner, Darrell Boverhof, Janet Carter, Vince Castranova, J. R. DeShazo, Saber M. Hussain ●, Agnes B. Kane, Frederick Klaessig, Eileen Kuempel, Mark Lafranconi, Robert Landsiedel, Timothy Malloy, Mary Beth Miller, Jeffery Morris, Kenneth Moss, Gunter Oberdorster, Kent Pinkerton, Richard C. Pleus, Jo Anne Shatkin, Russell Thomas, Thabet Tolaymat, Amy Wang, and Jeffrey Wong. ACS Nano, Article ASAP DOI: 10.1021/nn4037927 Publication Date (Web): August 7, 2013

Copyright © 2013 American Chemical Society

This article is behind a paywall.