Tag Archives: French Alternative Energies and Atomic Energy Commission

Nanowire fingerprint technology

Leave a reply

Apparently this technology from France’s Laboratoire d’électronique des technologies de l’information (CEA-Leti) will make fingerprinting more reliable. From a Sept. 5, 2017 news item on Nanowerk,

Leti today announced that the European R&D project known as PiezoMAT has developed a pressure-based fingerprint sensor that enables resolution more than twice as high as currently required by the U.S. Federal Bureau of Investigation (FBI).

The project’s proof of concept demonstrates that a matrix of interconnected piezoelectric zinc-oxide (ZnO) nanowires grown on silicon can reconstruct the smallest features of human fingerprints at 1,000 dots per inch (DPI).

“The pressure-based fingerprint sensor derived from the integration of piezo-electric ZnO nanowires grown on silicon opens the path to ultra-high resolution fingerprint sensors, which will be able to reach resolution much higher than 1,000 DPI,” said Antoine Viana, Leti’s project manager. “This technology holds promise for significant improvement in both security and identification applications.”

A Sept. 5, 2017 Leti press release, which originated the news item, delves further,

The eight-member project team of European companies, universities and research institutes fabricated a demonstrator embedding a silicon chip with 250 pixels, and its associated electronics for signal collection and post-processing. The chip was designed to demonstrate the concept and the major technological achievements, not the maximum potential nanowire integration density. Long-term development will pursue full electronics integration for optimal sensor resolution.

The project also provided valuable experience and know-how in several key areas, such as optimization of seed-layer processing, localized growth of well-oriented ZnO nanowires on silicon substrates, mathematical modeling of complex charge generation, and synthesis of new polymers for encapsulation. The research and deliverables of the project have been presented in scientific journals and at conferences, including Eurosensors 2016 in Budapest.

The 44-month, €2.9 million PiezoMAT (PIEZOelectric nanowire MATrices) research project was funded by the European Commission in the Seventh Framework Program. Its partners include:

  • Leti (Grenoble, France): A leading European center in the field of microelectronics, microtechnology and nanotechnology R&D, Leti is one of the three institutes of the Technological Research Division at CEA, the French Alternative Energies and Atomic Energy Commission. Leti’s activities span basic and applied research up to pilot industrial lines. www.leti-cea.com/cea-tech/leti/english
  • Fraunhofer IAF (Freiburg, Germany): Fraunhofer IAF, one of the leading research facilities worldwide in the field of III-V semiconductors, develops electronic and optical devices based on modern micro- and nanostructures. Fraunhofer IAF’s technologies find applications in areas such as security, energy, communication, health, and mobility. www.iaf.fraunhofer.de/en
  • Centre for Energy Research, Hungarian Academy of Sciences (Budapest, Hungary):  The Institute for Technical Physics and Materials Science, one of the institutes of the Research Centre, conducts interdisciplinary research on complex functional materials and nanometer-scale structures, exploration of physical, chemical, and biological principles, and their exploitation in integrated micro- and nanosystems www.mems.hu, www.energia.mta.hu/en
  • Universität Leipzig (Leipzig, Germany): Germany’s second-oldest university with continuous teaching, established in 1409, hosts about 30,000 students in liberal arts, medicine and natural sciences. One of its scientific profiles is “Complex Matter”, and contributions to PIEZOMAT are in the field of nanostructures and wide gap materials. www.zv.uni-leipzig.de/en/
  • Kaunas University of Technology (Kaunas, Lithuania): One of the largest technical universities in the Baltic States, focusing its R&D activities on novel materials, smart devices, advanced measurement techniques and micro/nano-technologies. The Institute of Mechatronics specializes on multi-physics simulation and dynamic characterization of macro/micro-scale transducers with well-established expertise in the field of piezoelectric devices. http://en.ktu.lt/
  • SPECIFIC POLYMERS (Castries, France): SME with twelve employees and an annual turnover of about 1M€, SPECIFIC POLYMERS acts as an R&D service provider and scale-up producer in the field of functional polymers with high specificity (>1000 polymers in catalogue; >500 customers; >50 countries). www.specificpolymers.fr/
  • Tyndall National Institute (Cork, Ireland): Tyndall National Institute is one of Europe’s leading research centres in Information and Communications Technology (ICT) research and development and the largest facility of its type in Ireland. The Institute employs over 460 researchers, engineers and support staff, with a full-time graduate cohort of 135 students. With a network of 200 industry partners and customers worldwide, Tyndall generates around €30M income each year, 85% from competitively won contracts nationally and internationally. Tyndall is a globally leading Institute in its four core research areas of Photonics, Microsystems, Micro/Nanoelectronics and Theory, Modeling and Design. www.tyndall.ie/
  • OT-Morpho (Paris, France): OT-Morpho is a world leader in digital security & identification technologies with the ambition to empower citizens and consumers alike to interact, pay, connect, commute, travel and even vote in ways that are now possible in a connected world. As our physical and digital, civil and commercial lifestyles converge, OT-Morpho stands precisely at that crossroads to leverage the best in security and identity technologies and offer customized solutions to a wide range of international clients from key industries, including Financial services, Telecom, Identity, Security and IoT. With close to €3bn in revenues and more than 14,000 employees, OT-Morpho is the result of the merger between OT (Oberthur Technologies) and Safran Identity & Security (Morpho) completed in 31 May 2017. Temporarily designated by the name “OT-Morpho”, the new company will unveil its new name in September 2017. For more information, visit www.morpho.com and www.oberthur.com

I have tended to take fingerprint technology for granted but last fall (2016) I stumbled on a report suggesting that forensic sciences, including fingerprinting, was perhaps not as conclusive as one might expect after watching fictional police procedural television programmes. My Sept. 23, 2016 posting features the US President’s Council of Advisors on Science and Technology (PCAST) released a report (‘Forensic Science in Criminal Courts: Ensuring Scientific Validity of Feature-Comparison Methods‘ 174 pp PDF).

Carbon nanotubes: OCSiAl’s deal in Korea and their effect on the body after one year

Leave a reply

I have two news items related only by their focus on carbon nanotubes. First, there’s a July 3, 2014 news item on Azonano featuring OCSiAl’s deal with a Korean company announced at NANO KOREA 2014,

At NANO KOREA 2014 OCSiAl announced an unprecedentedly large-scale deal with Korean company Applied Carbon Nano Technology [ACN] Co., Ltd. – one of the key industry players.

OCSiAl, the dominating graphene tubes manufacturer, that successfully presented its products and technology in Europe and USA, now to enter Asian nanotech markets. At NANO KOREA 2014 the company introduced TUBALL, the universal nanomodifier of materials featuring >75% of single wall carbon nanotubes, and announced signing of supply agreement with Applied Carbon Nano Technology Co., Ltd. (hereinafter referred to as ACN), a recognized future-oriented innovative company.

A July 3, 2014 OCSiAl news release, which originated the news item, describes the memorandum of understanding (MOU) in greater detail,

Under this MoU ACN would buy 100 kg of TUBALL. The upcoming deal is the first of OCSiAl’s Korean contracts to be performed in 2015 and it turns up the largest throughout SWCNT market, which annual turnover recently hardly reached 500 kg. The agreement is exceptionally significant as it opens fundamental opportunities for manufacturing of new nanomaterial-based product with the unique properties that were not even possible before.

“OCSiAl’s entry to Korean market required thorough preparation. We invested time and efforts to prove that our company, our technology and our products worth credibility, – says Viktor Kim, OCSiAl Vice President, – we urged major playmakers to take TUBALL for testing to verify the quality and effectiveness. We believe that ACN is more than an appropriate partner to start – they are experts at the market and they understand its future perspectives very clearly. We believe that mutually beneficial partnership with ACN will path the way for future contracts, since it will become indicative to other companies in Asia and all over the world”.

“It comes as no surprise that OCSiAl’s products here in Korea will be in a great demand soon. The country strives to become world’s leader in advanced technology, and we do realize the benefits of nanomaterial’s exploitation. TUBALL is a truly versatile additive which may be used across many market sectors, where adoption of new materials with top-class performance is essential”, – says Mr. Dae-Yeol Lee, CEO of ACN.

OCSiAl’s entering to Korean market will undoubtedly have a high-reaching impact on the industry. The recent merger with American Zyvex Technologies made OCSiAl the not only the world’s largest nanomaterial producer but a first-rate developer of modifiers of different materials based on carbon nanotubes. To its Korean partners OCSiAl offers TUBALL, the raw ‘as produced’ SWCNT material and masterbatches, which can be either custom-made or ready-to-use mixtures for different applications, including li-ion batteries, car tires, transparent conductive coatings and many others. “Since Korea is increasingly dynamic, our success here will build on continuous development of our product, – adds Viktor Kim, – And we are constantly working on new applications of graphene tubes to meet sophisticated demands of nanotech-savvy Korean consumers”.

OCSiAl’s Zyvex acquisition was mentioned in a June 23, 2014 posting here.

My second tidbit concerns a July 4, 2014 news item on Nanowerk about carbon nanotubes and their effect on the body (Note: A link has been removed),

Having perfected an isotope labeling method allowing extremely sensitive detection of carbon nanotubes in living organisms, CEA and CNRS researchers have looked at what happens to nanotubes after one year inside an animal. Studies in mice revealed that a very small percentage (0.75%) of the initial quantity of nanotubes inhaled crossed the pulmonary epithelial barrier and translocated to the liver, spleen, and bone marrow. Although these results cannot be extrapolated to humans, this work highlights the importance of developing ultrasensitive methods for assessing the behavior of nanoparticles in animals. It has been published in the journal ACS Nano (“Carbon Nanotube Translocation to Distant Organs after Pulmonary Exposure: Insights from in Situ 14C-Radiolabeling and Tissue Radioimaging”).

A July 1, 2014 CNRS [France Centre national de la recherche scientifique] press release, which originated the news item, describes both applications for carbon nanotubes and the experiment in greater detail,

Carbon nanotubes are highly specific nanoparticles with outstanding mechanical and electronic properties that make them suitable for use in a wide range of applications, from structural materials to certain electronic components. Their many present and future uses explain why research teams around the world are now focusing on their impact on human health and the environment.

Researchers from CEA and the CNRS joined forces to study the distribution over time of these nanoparticles in mice, following contamination by inhalation. They combined radiolabeling with radio imaging tools for optimum detection sensitivity. When making the carbon nanotubes, stable carbon (12C) atoms were replaced directly by radioactive carbon (14C) atoms in the very structure of the tubes. This method allows the use of carbon nanotubes similar to those produced in industry, but labeled with 14C. Radio imaging tools make it possible to detect up to twenty or so carbon nanotubes on an animal tissue sample.

A single dose of 20 µg [micrograms] of labeled nanotubes was administered at the start of the protocol, then monitored for one year. The carbon nanotubes were observed to translocate from the lungs to other organs, especially the liver, spleen, and bone marrow. The study demonstrates that these nanoparticles are capable of crossing the pulmonary epithelial barrier, or air-blood barrier. It was also observed that the quantity of carbon nanotubes in these organs rose steadily over time, thus demonstrating that these particles are not eliminated on this timescale. Further studies will have to determine whether this observation remains true beyond a year.

The CEA [French Alternative Energies and Atomic Energy Commission {Commissariat à l’énergie atomique et aux énergies alternatives}] and CNRS teams have developed highly specific skills that enable them to study the health and environmental impact of nanoparticles from various angles. Nanotoxicology and nanoecotoxicology research such as this is both a priority for society and a scientific challenge, involving experimental approaches and still emerging concepts.

This work is conducted as part of CEA’s interdisciplinary Toxicology and Nanosciences programs. These are management, coordination and support structures set up to promote multidisciplinary approaches for studying the potential impact on living organisms of various components of industrial interest, including heavy metals, radionuclides, and new products.

At the CNRS, these concerns are reflected in particular in major initiatives such as the International Consortium for the Environmental Implications of Nano Technology (i-CEINT), a CNRS-led international initiative focusing on the ecotoxicology of nanoparticles. CNRS teams also have a long tradition of close involvement in matters relating to standards and regulations. Examples of this include the ANR NanoNORMA program, led by the CNRS, or ongoing work within the French C’Nano network.

For those who would either prefer or like to check out  the French language version of the July 1, 2014 CNRS press release (La biodistribution des nanotubes de carbone dans l’organisme), it can be found here.

Here’s a link to and a citation for the paper,

Carbon Nanotube Translocation to Distant Organs after Pulmonary Exposure: Insights from in Situ 14C-Radiolabeling and Tissue Radioimaging by Bertrand Czarny, Dominique Georgin, Fannely Berthon, Gael Plastow, Mathieu Pinault, Gilles Patriarche, Aurélie Thuleau, Martine Mayne L’Hermite, Frédéric Taran, and Vincent Dive. ACS Nano, 2014, 8 (6), pp 5715–5724 DOI: 10.1021/nn500475u Publication Date (Web): May 22, 2014

Copyright © 2014 American Chemical Society

This paper is behind a paywall.