Tag Archives: nanoprinting process

Nanowalls (like waffles) for touchscreens

ETH Zurich has announced a new technique for creating transparent electrodes in a Jan. 6, 2016 news item on ScienceDaily,

Transparent electrodes have been manufactured for use in touchscreens using a novel nanoprinting process. The new electrodes are some of the most transparent and conductive that have ever been developed.

From smartphones to the operating interfaces of ticket machines and cash dispensers, every touchscreen we use requires transparent electrodes: The devices’ glass surface is coated with a barely visible pattern made of conductive material. It is because of this that the devices recognise whether and where exactly a finger is touching the surface.

Here’s an image illustrating the new electrodes,

With a special mode of electrohydrodynamic ink-jet printing scientists can create a grid of ultra fine gold walls. (Visualisations: Ben Newton / Digit Works)

With a special mode of electrohydrodynamic ink-jet printing scientists can create a grid of ultra fine gold walls. (Visualisations: Ben Newton / Digit Works)

I think these electrodes resemble waffles,

[downloaded from https://github.com/jhermann/Stack-O-Waffles] Credit: jherman

[downloaded from https://github.com/jhermann/Stack-O-Waffles] Credit: jherman

Getting back to the electrodes themselves, a Jan. 6, 2016 ETH Zurich press release (also on EurekAlert*)by Fabio Bergamin, which originated the news item, provides more details,

Researchers under the direction of Dimos Poulikakos, Professor of Thermodynamics, have now used 3D print technology to create a new type of transparent electrode, which takes the form of a grid made of gold or silver “nanowalls” on a glass surface. The walls are so thin that they can hardly be seen with the naked eye. It is the first time that scientists have created nanowalls like these using 3D printing. The new electrodes have a higher conductivity and are more transparent than those made of indium tin oxide, the standard material used in smartphones and tablets today. This is a clear advantage: The more transparent the electrodes, the better the screen quality. And the more conductive they are, the more quickly and precisely the touchscreen will work.

Third dimension

“Indium tin oxide is used because the material has a relatively high degree of transparency and the production of thin layers has been well researched, but it is only moderately conductive,” says Patrik Rohner, a PhD student in Poulikakos’ team. In order to produce more conductive electrodes, the ETH researchers opted for gold and silver, which conduct electricity much better. But because these metals are not transparent, the scientists had to make use of the third dimension. ETH professor Poulikakos explains: “If you want to achieve both high conductivity and transparency in wires made from these metals, you have a conflict of objectives. As the cross-sectional area of gold and silver wires grows, the conductivity increases, but the grid’s transparency decreases.”

The solution was to use metal walls only 80 to 500 nanometres thick, which are almost invisible when viewed from above. Because they are two to four times taller than they are wide, the cross-sectional area, and thus the conductivity, is sufficiently high.

Ink-jet printer with tiny print head

The researchers produced these tiny metal walls using a printing process known as Nanodrip, which Poulikakos and his colleagues developed three years ago. Its basic principle is a process called electrohydrodynamic ink-jet printing. In this process scientists use inks made from metal nanoparticles in a solvent; an electrical field draws ultra-small droplets of the metallic ink out of a glass capillary. The solvent evaporates quickly, allowing a three-dimensional structure to be built up drop by drop.

What is special about the Nanodrip process is that the droplets that come out of the glass capillary are about ten times smaller than the aperture itself. This allows for much smaller structures to be printed. “Imagine a water drop hanging from a tap that is turned off. And now imagine that another tiny droplet is hanging from this drop – we are only printing the tiny droplet,” Poulikakos explains. The researchers managed to create this special form of droplet by perfectly balancing the composition of metallic ink and the electromagnetic field used.

Cost-efficient production

The next big challenge will now be to upscale the method and develop the print process further so that it can be implemented on an industrial scale. To achieve this, the scientists are working with colleagues from ETH spin-off company Scrona.

Here’s a link to and a citation for the paper,

Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes by Julian Schneider, Patrick Rohner, Deepankur Thureja, Martin Schmid, Patrick Galliker, Dimos Poulikalos. Advanced Functional Materials DOI: 10.1002/adfm.201503705 First published: 15 December 2015

This paper is behind a paywall.

*'(also on EurekAlert)’ added on Jan. 7, 2016.