Tag Archives: Peter Grutter

Nanotechnology at the University of McGill (Montréal, Canada) and other Canadian universities

On the occasion of the McGill University’s new minor program in nanotechnology, I decided to find other Canadian university nanotechnology programs.

First, here’s more about the McGill program from an Oct. 25, 2016 article by Miguel Principe for The McGill Tribune (Note: Links have been removed),

McGill’s Faculty of Engineering launched a new minor program this year that explores into the world of nanotechnology. It’s a relatively young field that focuses on nanomaterials—materials that have one dimension measuring 100 nanometres or less. …

“Nanomaterials are going to be very prominent in our everyday lives,” Assistant Professor Nathalie Tufenkji, of McGill’s Department of Chemical Engineering, said.  “We’re incorporating these materials into our everyday consumer products […] we’re putting these materials on our skin, […] in our paints, and electronics that we are contacting everyday.”

The new engineering minor program aims to introduce undergraduates to techniques in nanomaterial characterization and detection, as well as nanomaterial synthesis and processing. These concepts will be covered in courses such as Nanoscience and Nanotechnology, Supramolecular Chemistry, and Design and Manufacture of Microdevices.

Tufenkji, along with Professor Peter Grutter in the Department of Physics were instrumental in organizing this program. The minor is interdepartmental and includes courses in physics and engineering.

“Of course there’s a flipside on how do we best develop nanotechnology to […] take advantage of its promise,” Tufenkji said. “One of the questions […] is what are the potential impacts on our health and environment of nanomaterials?”

Tufenkji believes it is important that Canada has scientists and engineers that are educated in emerging scientific concepts and cutting-edge technology. Giving undergraduate students exposure to nanotechnology research early in their studies is a good stepping stone for further investigation into the evolving field.

The most comprehensive list of nanotechnology degree programs in Canada (16 programs) is at Nanowerk (Note: Links have been removed and you may find some repetition),

Carleton University – BSc Chemistry with a concentration in Nanotechnology
This concentration allows students to study atoms and molecules used to create computer chips and other devices that are the size of a few nanometres – thousands of times smaller than current technology permits. Such discoveries will be useful in a number of fields, including aerospace, medicine, and electronics.

Carleton University – BSc Nanoscience
At Carleton, you will examine nanoscience through the disciplines of physical chemistry and electrical engineering to understand the physical, chemical and electronic characteristics of matter in this size regime. The combination of these two areas of study will equip you to fully understand nanoscience in photonic, electronic, energy and communication technologies. The focus of the program will be on materials – their use in electronic devices, their scalability and control of their properties.

McGill University – Bachelor of Engineering, Minor Nanotechnology
Through courses already offered in the Faculties of Science, Engineering, and Medicine, depending on the courses completed, undergraduate students will acquire knowledge in areas related to nanotechnology.

Northern Alberta Institute of Technology – Nanotechnology Systems Diploma Program
The two year program will provide graduates with the skills to operate systems and equipment associated with Canada’s emerging nanotechnology industry and lead to a Diploma in Nanotechnology Systems.

University of Alberta – BSc Computer Engineering with Nanoscale System Design Option
This options provides an introduction to the processes involved in the fabrication of nanoscale integrated circuits and to the computer aided design (CAD) tools necessary for the engineering of large scale system on a chip. By selecting this option, students will learn about fault tolerance in nanoscale systems and gain an understanding of quantum phenomena in systems design.

University of Alberta – BSc Electrical Engineering with Nanoengineering Option
This option provides an introduction to the principles of electronics, electromagnetics and photonics as they apply at the nanoscale level. By selecting this option, students will learn about the process involved in the fabrication of nanoscale structures and become familiar with the computer aided design (CAD) tools necessary for analyzing phenomena at these very high levels of miniaturization.

University of Alberta – BSc Engineering Physics with Nanoengineering Option
The Nanoengineering Option provides broad skills suitable for entry to the nanotechnology professions, combining core Electrical Engineering and Physics courses with additional instruction in biochemistry and chemistry, and specialized instruction in nanoelectronics, nanobioengineering, and nanofabrication.

University of Alberta – BSc Materials Engineering with Nano and Functional Materials Option
Students entering this option will be exposed to the exciting and emerging field of nano and functional materials. Subject areas covered include electronic, optical and magnetic materials, nanomaterials and their applications, nanostructured molecular sieves, nano and functional materials processing and fabrication. Employment opportunities exist in several sectors of Canadian industry, such as microelectronic/optoelectronic device fabrication, MEMS processing and fuel cell development.

University of Calgary – B.Sc. Concentration in Nanoscience
Starting Fall 2008/Winter 2009, students can enroll in the only process learning driven Nanoscience program in North America. Courses offered are a B.Sc. Minor in Nanoscience and a B.Sc. Concentration in Nanoscience.

University of Calgary – B.Sc. Minor in Nanoscience
Starting Fall 2008/Winter 2009, students can enroll in the only process learning driven Nanoscience program in North America. Courses offered are a B.Sc. Minor in Nanoscience and a B.Sc. Concentration in Nanoscience.

University of Guelph – Nanoscience B.Sc. Program
At Guelph we have created a unique approach to nanoscience studies. Fundamental science course are combined with specially designed courses in nanoscience covering material that would previously only be found in graduate programs.

University of Toronto – BASc in Engineering Science (Nanoengineering Option)
This option transcends the traditional boundaries between physics, chemistry, and biology. Starting with a foundation in materials engineering and augmented by research from the leading-edge of nanoengineering, students receive an education that is at the forefront of this constantly evolving area.

University of Waterloo – Bachelor of Applied Science Nanotechnology Engineering
The Nanotechnology Engineering honours degree program is designed to provide a practical education in key areas of nanotechnology, including the fundamental chemistry, physics, and engineering of nanostructures or nanosystems, as well as the theories and techniques used to model, design, fabricate, or characterize them. Great emphasis is placed on training with modern instrumentation techniques as used in the research and development of these emerging technologies.

University of Waterloo – Master of Applied Science Nanotechnology
The interdisciplinary research programs, jointly offered by three departments in the Faculty of Science and four in the Faculty of Engineering, provide students with a stimulating educational environment that spans from basic research through to application. The goal of the collaborative programs is to allow students to gain perspectives on nanotechnology from a wide community of scholars within and outside their disciplines in both course and thesis work. The MASc and MSc degree collaborative programs provide a strong foundation in the emerging areas of nano-science or nano-engineering in preparation for the workforce or for further graduate study and research leading to a doctoral degree.

University of Waterloo – Master of Science Nanotechnology
The interdisciplinary research programs, jointly offered by three departments in the Faculty of Science and four in the Faculty of Engineering, provide students with a stimulating educational environment that spans from basic research through to application. The goal of the collaborative programs is to allow students to gain perspectives on nanotechnology from a wide community of scholars within and outside their disciplines in both course and thesis work. The MASc and MSc degree collaborative programs provide a strong foundation in the emerging areas of nano-science or nano-engineering in preparation for the workforce or for further graduate study and research leading to a doctoral degree.

University of Waterloo – Ph.D. Program in Nanotechnology
The objective of the PhD program is to prepare students for careers in academia, industrial R&D and government research labs. Students from Science and Engineering will work side-by-side in world class laboratory facilities namely, the Giga-to-Nano Electronics Lab (G2N), Waterloo Advanced Technology Lab (WatLAB) and the new 225,000 gross sq. ft. Quantum-Nano Center expected to be completed in early 2011.

The Wikipedia entry for Nanotechnology education lists a few Canadian university programs that seem to have been missed, as well as a few previously seen in the Nanowerk list (Note: Links have been removed),

  • University of Alberta – B.Sc in Engineering Physics with Nanoengineering option
  • University of Toronto – B.A.Sc in Engineering Science with Nanoengineering option
  • University of Waterloo – B.A.Sc in Nanotechnology Engineering
    • Waterloo Institute for Nanotechnology -B.Sc, B.A.Sc, master’s, Ph.D, Post Doctorate
  • McMaster University – B.Sc in Engineering Physics with Nanotechnology option
  • University of British Columbia – B.A.Sc in Electrical Engineering with Nanotechnology & Microsystems option
  • Carleton University – B.Sc in Chemistry with Concentration in Nanotechnology
  • University of Calgary – B.Sc Minor in Nanoscience, B.Sc Concentration in Nanoscience
  • University of Guelph – B.Sc in Nanoscience

So, there you have it.

Construction materials and a McGill University physicist

At the Construction Specifications Canada (CSC) conference, May 25 – 29, 2011 in Montréal, PeterGrutter, a physics professor at McGill University (located in Montréal, Québec) noted that nanotechnology will have a huge impact on the construction industry. From  Greg Meckbach’s June 7, 2011 article for the online version of the Daily Commercial News and Construction Record,

“Fundamentally, you can change a lot of the properties, curing times, energy consumption in major building materials by using various types of nano materials” he said.

Grutter made his remarks during a presentation at the CSC annual conference at Montreal’s Delta Centre Ville.

He said silicon dioxide has a “huge potential benefit” because if you reduce the size of the silicon particles to nanometer-scale, you could form concrete with fewer pores.

“It will stop infiltration of water and that infiltration of water is what leads to degradation of concrete.”

Grutter added iron oxide can increase tensile strength and abrasion resistance of materials but he stressed he cannot predict how quickly advances in nanotechnology will be widely used in construction.

Grutter did go on to comment about possible health issues in a way that suggests his investigation of the topic has been hasty,

In addition to cost, there are concerns about contamination and the health effects on people exposed to nanomaterials, he said.

“In the construction industry, if you use nanoparticles, the workers can be exposed to these particles and someone might live there,” he said. “We might not see these potential benefits implemented in society that quickly.”

Assessing health risks is time consuming, Grutter said. [emphases mine]

“… workers can be exposed to [nano]particles and someone might live there,” seems a little sketchy doesn’t it? As for the time it takes to assess health risks, I’m not sure what point Grutter is making with that comment. Still I have to say that I’m thrilled about this next bit,

Another potential application is self-cleaning walls, where the material emulates the properties of hydrophobic leaves.

Instead of sliding off, water rolls off, and with surface tension the water brings dirt off with it, so it remains self cleaning.

“It would be really cool, because essentially what that means is that to clean off sides of buildings you would just have to wait for it to rain.”

Self-cleaning buildings? Does this mean there’ll also be self-cleaning windows? I hope so.