Tag Archives: Teimour Maleki

Music can recharge sensors in your body

According to a Jan.26, 2012 news item written by Emil Venere at Purdue University and posted on Nanowerk, researchers have found a new way to recharge batteries in new medical sensors that could be implanted in individuals stricken with aneurysms or bladder incontinence due to paralysis. From the news item,

“You would only need to do this for a couple of minutes every hour or so to monitor either blood pressure or pressure of urine in the bladder,” Ziaie [Babak Ziaie, a Purdue University professor of electrical and computer engineering and biomedical engineering] said. “It doesn’t take long to do the measurement.”

Findings are detailed in a paper (“A Novel Electromechanical Interrogation Scheme for Implantable Passive Transponders”) to be presented during the IEEE [Institute of Electrical and Electronics Engineers] MEMS [Micro Electro Mechanical Systems] 2012 conference, which will be Jan. 29 to Feb. 2 in Paris. The paper was written by doctoral student Albert Kim, research scientist Teimour Maleki and Ziaie.

“This paper demonstrates the feasibility of the concept,” he said.

As you may have guessed from that last line, this hasn’t been tried on people. According to the news item, the concept was tested using a water-filled balloon.

I checked out Venere’s Jan. 26, 2012 news release on the Purdue University website and am excerpting a few details about how these medical sensors work,

The sensor is capable of monitoring pressure in the urinary bladder and in the sack of a blood vessel damaged by an aneurism. Such a technology could be used in a system for treating incontinence in people with paralysis by checking bladder pressure and stimulating the spinal cord to close the sphincter that controls urine flow from the bladder. More immediately, it could be used to diagnose incontinence. The conventional diagnostic method now is to insert a probe with a catheter, which must be in place for several hours while the patient remains at the hospital.

The writer goes on to describe some of the reasons for why this new technology is being pursued,

“A wireless implantable device could be inserted and left in place, allowing the patient to go home while the pressure is monitored,” Ziaie said.

The new technology offers potential benefits over conventional implantable devices, which either use batteries or receive power through a property called inductance, which uses coils on the device and an external transmitter. Both approaches have downsides. Batteries have to be replaced periodically, and data are difficult to retrieve from devices that use inductance; coils on the implanted device and an external receiver must be lined up precisely, and they can only be about a centimeter apart.

The following image is  the researchers’ new sensor, balanced on a coin,

Researchers have created a new type of miniature pressure sensor, shown here, designed to be implanted in the body. Acoustic waves from music or plain tones drive a vibrating device called a cantilever, generating a charge to power the sensor. (Birck Nanotechnology Center, Purdue University)

I found the description of how the cantilever works and can be recharged quite interesting,

The heart of the sensor is a vibrating cantilever, a thin beam attached at one end like a miniature diving board. Music within a certain range of frequencies, from 200-500 hertz, causes the cantilever to vibrate, generating electricity and storing a charge in a capacitor …

The cantilever beam is made from a ceramic material called lead zirconate titanate, or PZT, which is piezoelectric, meaning it generates electricity when compressed. The sensor is about 2 centimeters long …

A receiver that picks up the data from the sensor could be placed several inches from the patient. Playing tones within a certain frequency range also can be used instead of music.

“But a plain tone is a very annoying sound,” Ziaie said. “We thought it would be novel and also more aesthetically pleasing to use music.”

Researchers experimented with four types of music: rap, blues, jazz and rock.

“Rap is the best because it contains a lot of low frequency sound, notably the bass,” Ziaie said.

“The music reaches the correct frequency only at certain times, for example, when there is a strong bass component,” he said. “The acoustic energy from the music can pass through body tissue, causing the cantilever to vibrate.”

When the frequency falls outside of the proper range, the cantilever stops vibrating, automatically sending the electrical charge to the sensor, which takes a pressure reading and transmits data as radio signals. Because the frequency is continually changing according to the rhythm of a musical composition, the sensor can be induced to repeatedly alternate intervals of storing charge and transmitting data.

“You would only need to do this for a couple of minutes every hour or so to monitor either blood pressure or pressure of urine in the bladder,” Ziaie said. “It doesn’t take long to do the measurement.”

It’s usually a long time from testing a concept (in this case, on a water balloon) to bringing a product to the marketplace. In the meantime, I wonder if this concept will work in the ‘wild’ where people are exposed to rap music accidentally or they like to listen to it themselves, all day long, or they loathe rap music and don’t want to listen for a few minutes every hour.

Finally, I have some special appreciation for Venere as he very neatly explained terms I’ve seen many times but for which I’ve only been able to find complicated definitions. Thank you, Mr. Venere and for a very clear description of this technology.