Tag Archives: US National Institute of Environmental Health Sciences (NIEHS)

UK and US issue documents nanomaterial safety to support safe work with nanomaterials

Leave a reply

I am featuring two bits of information about nanosafety first from the UK and then from the US.

UK and nanosafety

A May 30, 2016 news item on Nanowerk announces a not particularly exciting but necessary report on handling nanomaterials safely (Note: A link has been removed),

The UK Nanosafety Group (UKNSG) has updated and published a 2nd edition of guidance (pdf) to support safe and responsible working practices with nanomaterials in research and development laboratories.

A May 25, 2016 UK Nanosafety Group press release, which originated the news item, provides more detail,

The document aims to provide guidance on factors relating to establishing a safe workplace and good safety practice when working with particulate nanomaterials. It is applicable to a wide range of nanomaterials, including particles, fibres, powders, tubes and wires as well as aggregates and agglomerates, and recognises previous and current uncertainty in developing effective risk management when dealing with nanomaterials and advocates a precautionary strategy to minimise potential exposure.

The 2nd edition of the guidance provides updates to account for changes in legislation, recent studies in the literature, and best practice since 2012. In particular, specific sections have been revised to account for the full implementation of Global Harmonised System (GHS) which came into force on 1 June 2015 through the CLP [Classification, Labelling and Packaging] regulations. The document explains the approaches that are presently being used to select effective control measures for the management of nanomaterials, more specifically control banding tools presently in use. Significant changes can be found in the following sections: ‘Hazard Banding’, ‘Exposure Control’, ‘Toxicology’, and ‘Monitoring’.

Of relevance to employers, managers, health and safety advisors, and users of particulate nanomaterials in research and development, the guidance should be read in conjunction with the Approved Code of Practice on COSHH [Control of Substances Hazardous to Health], together with the other literature referred to in the document. The document has been produced taking account of the safety information currently available and is presented in the format of guidance and recommendations to support implementation of suitable protocols and control measures by employers and employees. It is intended that the document will be reviewed and updated on a periodic basis to keep abreast of the evolving nature of the content.

The guidance titled “Working Safely with Nanomaterials in Research & Development” is about 48 pp. and can be found here.

Tidbit about US nano environmental, health, and safety

Sylvia Palmer has written a May 27, 2016 update for ChemicalWatch on reports about or including information about environmental, health, and safety measures being taken in the US,

Three reports released recently by the National Nanotechnology Initiative (NNI) highlight the US government’ investments and initiatives in nanotechnology. They also detail current progress and the need for further understanding of exposure to nanomaterials in consumer products –and how companies can protect their nanotechnology workforce.

NNI’s Quantifying exposure to engineered nanomaterials (QEEN) from manufactured products: addressing environmental, health, and safety implications notes significant progress has been made in the ability to quantify nanomaterial exposures. However, it says greater understanding of exposure risks in “real-world” scenarios is needed. Alternative testing models and high-throughput methods for rapidly estimating exposures will be further explored, it adds.

…

You can find the report, Quantifying exposure to engineered nanomaterials (QEEN) from manufactured products: addressing environmental, health, and safety implications, here. Palmer’s article briefly describes the other two reports which contain information about US nano environmental, health, and safety efforts.

There is more about the three reports in an April 11, 2016 posting by Lloyd Whitman (Assistant Director for Nanotechnology and Advanced Materials, White House Office of Science and Technology Policy) and Treye Thomas (leader of the Chemical Hazards Program team in the U.S. Consumer Product Safety Commission, and Coordinator for Environmental, Health, and Safety Research under the National Nanotechnology Initiative) on the White House blog,

The recently released NNI Supplement to the President’s Budget for Fiscal Year 2017, which serves as the annual report for the NNI, highlights the programs and coordinated activities taking place across the many departments, independent agencies, and commissions participating today in the NNI—an initiative that continues to serve as a model for effective coordination of Federal science and technology R&D. As detailed in this report, nanoEHS activities continue to account for about 10 percent of the annual NNI budget, with cumulative Federal R&D investments in this area exceeding $1 billion over the past decade. This report includes descriptions of a wide variety of individual agency and coordinated activities supporting the responsible development of nanotechnology.

To understand and control the risks of using any new materials in consumer products, it is important to understand the potential for exposure and any associated hazards across product life cycles. Last month, the NNI released a report, Quantifying Exposure to Engineered Nanomaterials (QEEN) from Manufactured Products: Addressing Environmental, Health, and Safety Implications, summarizing a workshop on this topic sponsored by the U.S. Consumer Product Safety Commission (CPSC). The main goals of the workshop were to assess progress in developing tools and methods for quantifying exposure to engineered nanomaterials across the product life cycle, and to identify new research needed to advance exposure assessment for nanotechnology-enabled products. …

The technical experts who participated in CPSC’s workshop recommended that future work focus on the complex issue of determining biomarkers of exposure linked to disease, which will require substantive public–private collaboration, partnership, and knowledge sharing. Recognizing these needs, the President’s 2017 Budget request for CPSC includes funds for a new nanotechnology center led by the National Institute of Environmental Health Sciences (NIEHS) to develop test methods and to quantify and characterize the presence, release, and mechanisms of consumer exposure to nanomaterials in consumer products. This cost-effective, interagency collaboration will enable CPSC—through NIEHS—to collect the needed data to inform the safety of nanotechnology in consumer products and allow CPSC to benefit from NIEHS’s scientific network and experience.

Managing EHS risks across a product’s lifecycle includes protecting the workers who manufacture those products. The National Institute for Occupational Safety and Health has issued a series of documents providing guidance to this emerging industry, including the recently released publication Building a Safety Program to Protect the Nanotechnology Workforce: A Guide for Small to Medium-Sized Enterprises. This guide provides business owners with the tools necessary to develop and implement a written health and safety program to protect their employees.

Whitman also mentions a June 2016 international conference in the context of this news,

The responsible development of nanotechnology is a goal that the United States shares with many countries. The United States and the European Union are engaged in notable cooperation on this front. European and American scientists engaged in nanoEHS research convene annually for a joint workshop to identify areas of shared interest and mechanisms for collaboration to advance nanoEHS science. The 2016 joint workshop will be held on June 6–7, 2016 in Arlington, VA, and is free and open to the public. …

Lung injury, carbon nanotubes, and aluminum oxide

Leave a reply

It’s pretty much undisputed that long, multi-walled carbon nanotubes (MWCNTs) are likely to present a serious health hazard given their resemblance to asbestos fibres. It’s a matter of some concern that has resulted in a US National Institute of Occupational Safety and Health (NIOSH) recommendation for workplace exposure to all carbon nanotubes that is stringent. (My April 26, 2013 posting features the recommendation.)

Some recent research from North Carolina State University (NCSU) suggests that there may be a way to make long, multi-walled carbon nanotubes safer. From an Oct. 3, 2014 news item on Nanowerk,

A new study from North Carolina State University and the National Institute of Environmental Health Sciences (NIEHS) finds that coating multiwalled carbon nanotubes (CNTs) with aluminum oxide reduces the risk of lung scarring, or pulmonary fibrosis, in mice.

“This could be an important finding in the larger field of work that aims to predict and prevent future diseases associated with engineered nanomaterials,” says James Bonner, a professor of environmental and molecular toxicology at NC State …

An Oct. 3, 2014 NCSU news release, which originated the news item, describes the research in a little more detail,

Multiwalled CNTs have a wide array of applications, ranging from sporting goods to electronic devices. And while these materials have not been associated with adverse health effects in humans, research has found that multi-walled CNTs can cause pulmonary fibrosis and lung inflammation in animal models.

“Because multiwalled CNTs are increasingly used in a wide variety of products, it seems likely that humans will be exposed to them at some point,” Bonner says. “That means it’s important for us to understand these materials and the potential risk they pose to human health. The more we know, the better we’ll be able to engineer safer materials.”

For this study, the researchers used atomic layer deposition to coat multiwalled CNTs with a thin film of aluminum oxide and exposed mice to a single dose of the CNTs, via inhalation.

The researchers found that CNTs coated with aluminum oxide were significantly less likely to cause pulmonary fibrosis in mice. However, the coating of aluminum oxide did not prevent lung inflammation.

“The aluminum oxide coating doesn’t eliminate health risks related to multi-walled CNTs,” Bonner says, “but it does lower them.”

Here’s a link to and a citation for the paper,

Atomic Layer Deposition Coating of Carbon Nanotubes with Aluminum Oxide Alters Pro-Fibrogenic Cytokine Expression by Human Mononuclear Phagocytes In Vitro and Reduces Lung Fibrosis in Mice In Vivo by Alexia J. Taylor, Christina D. McClure, Kelly A. Shipkowski, Elizabeth A. Thompson, Salik Hussain, Stavros Garantziotis, Gregory N. Parsons, and James C. Bonner. Published: September 12, 2014 DOI: 10.1371/journal.pone.0106870

This is an open access article.

The researchers offered this conclusion (part of the paper’s abstract),

These findings indicate that ALD [atomic layer deposition] thin film coating of MWCNTs with Al2O3 reduces fibrosis in mice and that in vitro phagocyte expression of IL-6, TNF-α, and OPN, but not IL-1β, predict MWCNT-induced fibrosis in the lungs of mice in vivo.

However, what I found most striking was this from the paper’s Discussion (section),

While the Al2O3 coating on MWCNTs appears to be the major factor that alters cytokine production in THP-1 and PBMCs in vitro, nanotube length is still likely an important determinant of the inflammatory and fibroproliferative effects of MWCNTs in the lung in vivo. In general, long asbestos fibers or rigid MWCNTs (i.e., >20 µm) remain in the lung and are much more persistent than shorter fibers or nanotubes [20]. Therefore, the nanotube fragments resulting from breakage of A-MWCNTs coated with 50 or 100 ALD cycles of Al2O3 would likely be cleared from the lungs more rapidly than uncoated long MWCNTs or those coated with only 10 ALD cycles of Al2O3. We observed that the fracturing of A-MWCNTs occurred only after sonication prior to administration to cells in vitro or mice in vivo. However, unsonicated A-MWCNTs could be more likely to fracture over time in tissues as compared to U-MWCNTs [uncoated]. We did not address the issue of A-MWCNT clearance before or after fracturing in the present study, but future work should focus the relative clearance rates from the lungs of mice exposed to A-MWCNTs in comparison to U-MWCNTs. Another potentially important consideration is whether or not ALD coating with Al2O3 alters the formation of a protein corona around MWCNTs. It is possible that differences in cytokine levels in the supernatants from cells treated with U- or A-MWCNTs could be due to differences in protein corona formation around functionalized MWCNTs that could modify the adsorptive capacity of the nanomaterial. Characterization of the protein corona and the adsorptive capacity for cytokines after ALD modification of MWCNTs should be another important focus for future work. [emphases mine]

In other words, researchers think coating long, MWCNTs with a certain type of aluminum might be safer due to its effect on various proteins and because coated MWCNTs are likely to fracture into smaller pieces and we know that short MWCNTs don’t seem to present a problem when inhaled.

Of course, there’s the research from Duke University (my Oct. 3, 2014 post) which suggests CNTs could present a different set of problems over time as they accumulate in the environment.