Tag Archives: water remediation

96% of 9.1 grams per metric ton, or 0.32 ounces per ton, of gold recovered in gold tailings tests

Leave a reply

I’ve written about Canadian company NanoStruck before (Dec. 27, 2013 posting) where I noted there wasn’t much information about their technology. If a Feb. 10, 2014 news item on Azonano is any measure, It seems Nanostruck is preparing to provide more technical information,

NanoStruck Technologies Inc. announces testing of its mine tailings treatment techniques and preliminary results showing recovery rates of gold from mine tailings to be much higher than expected by industry observers.

NanoStruck’s techniques involve nanotechnology and industrial collaboration for specific innovative milling, pryometallurgy and hydrometallurgy processes combined with proprietary organic compounds.

Tests completed over the past three months indicate that the Nanostruck techniques can recover as much as 96% of 9.1 grams per metric ton, or 0.32 ounces per ton, of gold contained in representative gold tailings samples.

I believe the technology mentioned in the news release is NanoStruck’s NanoMet solution (from my Dec. 27, 2013 posting),

Additionally, the Company’s technology can be used to recover precious and base metals from mine tailings, which are the residual material from earlier mining activities. By retrieving valuable metals from old tailing dumps, the Company’s NanoMet solutions boosts the value of existing mining assets and reduces the need for new, costly and potentially environmentally harmful exploration and mining. [emphasis mine]

The Feb. 7, 2014 NanoStruck news release, which originated the Azonano news item, notes,

The testing involved careful roasting of tailings in laboratories. When the Nanostruck techniques were applied to tailings that had been previously roasted at the source site, the recovery rate was 88%, multi-fold higher than previous attempts by other companies using alternative technologies such as cyanide leaching. From the same already roasted sample, for example, conventional Carbon In Leach (CIL) processes had resulted in less than 10 percent recovery of gold. The volume of tailings at the source site, which is owned by an unrelated third party, is estimated to be between 450,000 tons and 500,000 tons. NanoStruck is in discussions with the owners of the source site regarding potential contracts for processing the mine tailings at the source site.

The head assays and sampling were done by SGS SA and optical microscopic study performed by Petrolab Ltd to verify the representativeness of the tailing samples as well as percentage of precious metal contained in them. Recovery rates and processes used were also monitored and verified by certified third party experts and laboratory testing, including electron microscope analysis.

The value of precious metals left in mine tailings in 2012 alone by mining companies such as Anglo American Plc (LON: AAL), Barrick Gold Corp. (TSX: ABX, NYSE: ABX), Goldcorp Inc. (TSX: G, NYSE: GG) and Rio Tinto Group (ASX: RIO), was estimated to be US$20 billion at current market prices. Of that, gold represented more than 80% of the value with approximately 360 tons of gold left behind in tailings due to their micronic size, complex minerology as well as political and environmental concerns related to cyanide leaching.

NanoStruck’s environmentally conscious approach did not involve the use of cyanide leaching. All chemicals and organic substances used were recycled and reused.

More details on the refractory gold tailing samples and specifics of the results will be published in the weeks ahead along with highlights from an environmental impact study as well as a volumetrics and grade survey.

Bundeep Singh Rangar, interim CEO and Chairman of the Board said: “We are very excited to announce these tremendously high recovery rates, involving non-cyanide hydrometallurgy and nanotechnology based processes, that could be transformative for the mining industry.”

Brian Mok, Senior Mining Consultant at BG Partners Corp. said: “High value refractory ore and tailings would be very well suited for this process as well as jurisdictions where the use of toxic materials such as cyanide is undesirable or unacceptable.” [emphasis mine]

It’s good to see more detailed information about the company’s technologies and I look forward to learning more as the company releases more details. For example, NanoStruck has retained a mining consultant, Brian Mok, according to a Jan. 31, 2014 NanoStruck news release,

NanoStruck Technologies Inc. (the “Company” or “NanoStruck”) (CSE:NSK) (OTCQX:NSKTF) (Frankfurt:8NSK) announces the appointment of Mr. Brian Mok as Senior Mining Analyst as a Consultant-In-Residence.

Mr. Mok has been involved with the mining industry for the past 17 years. He is a Senior Mining Analyst at BG Partners Corp., a Canadian-based resource investment group that finances and invests in a portfolio of companies, from where he has been seconded to NanoStruck to help build the Company’s NanoMet solutions that recover precious metals from mine tailings.

Mr. Mok was previously Senior Mining Analyst, Capital Markets Group for Union Securities Ltd.; his focus was on micro and small cap names in Precious Metals, Base Metals and Bulk Commodities.

His previous roles also include Research Associate, Metals & Mining, and Gold for Scotia Capital Inc. Prior to his career in capital markets, Mr. Mok has previously served as a project engineer and a sales engineer in Canada, the USA and Europe. Mr. Mok is a Professional Engineer and a Member of the Association of Professional Engineers of Ontario.

Bundeep Singh Rangar, Chairman of the Board, said: “We are pleased to have Mr. Mok assist us in building the NanoMet proposition, where his understanding of both our technology and the market’s commercial drivers are a real asset for our Company.”

If Mok has been seconded to work with NanoStruck, does that mean that BG Partners owns or is in some way related to NanoStruck?

About the Company

NanoStruck Technologies Inc.is a Canadian Company with a suite of technologies that remove molecular sized particles using patented absorptive organic polymers. These versatile biomaterials are derived from crustacean shells or plant fibers, depending on requirements of their usage. Acting as molecular sponges, the nanometer-sized polymers are custom programmed to absorb specific particles for remediation or retrieval purposes. These could be used to clean out acids, hydrocarbons, pathogens, oils and toxins in water via its NanoPure solutions. Or to recover precious metal particles in mine tailings, such as gold, silver, platinum, palladium and rhodium using the Company’s NanoMet solutions.

By using patented modifications to conventional technologies and adding polymer-based nano-filtration, the Company’s offers environmentally safe NanoPure solutions for water purification. The Company uses Environmental Protection Agency (EPA) and World Health Organization (WHO) guidelines as a benchmark for water quality and safety to conform to acceptable agricultural or drinking water standards in jurisdictions where the technology is used.

Additionally, the Company’s technology can be used to recover precious and base metals from mine tailings, which are the residual material from earlier mining activities. By retrieving valuable metals from old tailing dumps, the Company’s NanoMet solutions boosts the value of existing mining assets and reduces the need for new, costly and potentially environmentally harmful exploration and mining.

The Company’s current business model is based on either selling water remediation plants or leasing out units and charging customers on a price per liter basis with a negotiated minimum payment per annum. For processing mine tailings, the value of precious metal recovered is shared with tailing site owners on a pre-agreed basis.

 

Naimor: innovative nanostructured material for water remediation and oil recovery (crowdfunding project)

Leave a reply

The NAIMOR crowdfunding project on indiegogo might be of particular interest to those of us on the West Coast of Canada where there is much talk about a project to create twin pipelines (Enbridge Northern Gateway Pipelines) between the provinces of  Alberta and British Columbia to export oil and import natural gas. The oil will be shipped to Asia by tanker and presumably so will the natural gas. In all the discussion about possible environmental disasters, I haven’t seen any substantive mention of remediation efforts or research to improve the technologies associated with environmental cleanups (remediation of water, soil, and/or air). At any rate, all this talk about the pipelines and oil tankers along Canada’s West Coast brought to mind the BP oil spill, aka the Deepwater Horizon oil spill, from the Wikipedia essay (Note: Links have been removed),

The Deepwater Horizon oil spill (also referred to as the BP oil spill, the BP oil disaster, the Gulf of Mexico oil spill, and the Macondo blowout) began on 20 April 2010 in the Gulf of Mexico on the BP-operated Macondo Prospect. It claimed eleven lives[5][6][7][8] and is considered the largest accidental marine oil spill in the history of the petroleum industry, an estimated 8% to 31% larger in volume than the previously largest, the Ixtoc I oil spill. Following the explosion and sinking of the Deepwater Horizon oil rig, a sea-floor oil gusher flowed for 87 days, until it was capped on 15 July 2010.[7][9] The total discharge has been estimated at 4.9 million barrels (210 million US gal; 780,000 m3).[3]

A massive response ensued to protect beaches, wetlands and estuaries from the spreading oil utilizing skimmer ships, floating booms, controlled burns and 1.84 million US gallons (7,000 m3) of Corexit oil dispersant.[10] After several failed efforts to contain the flow, the well was declared sealed on 19 September 2010.[11] Some reports indicate the well site continues to leak.[12][13] Due to the months-long spill, along with adverse effects from the response and cleanup activities, extensive damage to marine and wildlife habitats, fishing and tourism industries, and human health problems have continued through 2013.[14][15] Three years after the spill, tar balls could still be found on the Mississippi coast.[16] In July 2013, the discovery of a 40,000 pound tar mat near East Grand Terre, Louisiana prompted the closure of waters to commercial fishing.[17][18]

While Canada’s Northern Gateway project does not include any plans for ocean oil rigs, there is still the potential for massive spills either from the tankers or the pipelines. For those old enough to remember or those interested in history, this latest project raises the spectre of the Exxon Valdes oil spill, from the Wikipedia essay (Note: Links have been removed),

The Exxon Valdez oil spill occurred in Prince William Sound, Alaska, on March 24, 1989, when Exxon Valdez, an oil tanker bound for Long Beach, California, struck Prince William Sound’s Bligh Reef at 12:04 a.m.[1] local time and spilled 260,000 to 750,000 barrels (41,000 to 119,000 m3) of crude oil[2][3] over the next few days. It is considered to be one of the most devastating human-caused environmental disasters.[4] The Valdez spill was the largest ever in US waters until the 2010 Deepwater Horizon oil spill, in terms of volume released.[5]  [emphasis mine] However, Prince William Sound’s remote location, accessible only by helicopter, plane, or boat, made government and industry response efforts difficult and severely taxed existing plans for response. The region is a habitat for salmon, sea otters, seals and seabirds. The oil, originally extracted at the Prudhoe Bay oil field, eventually covered 1,300 miles (2,100 km) of coastline,[6] and 11,000 square miles (28,000 km2) of ocean.[7] Exxon’s CEO, Lawrence Rawl, shaped the company’s response.[8]

Some of that ‘difficult to reach’ coastline and habitat was Canadian (province of British Columbia). Astonishingly, given the 20 year gap between the Exxon Valdes spill and the Deepwater Horizon spill, the technology for remediation and cleanup had not changed much, although it seems that the measures* used to stop the oil spill were even older, from my June 4, 2010 posting,

I found a couple more comments relating to the BP oil spill  in the Gulf. Pasco Phronesis offers this May 30, 2010 blog post, Cleaning With Old Technology, where the blogger, Dave Bruggeman, asks why there haven’t been any substantive improvements to the technology used for clean up,

The relatively ineffective measures have changed little since the last major Gulf of Mexico spill, the Ixtoc spill in 1979. While BP has solicited for other solutions to the problem (Ixtoc was eventually sealed with cement and relief wells after nine months), they appear to have been slow to use them.

It is a bit puzzling to me why extraction technology has improved but cleanup technology has not.

An excellent question.

I commented a while back (here) about another piece of nano reporting from* Andrew Schneider. Since then, Dexter Johnson at Nanoclast has offered some additional thoughts (independent of reading Andrew Maynard’s 2020 Science post) about the Schneider report regarding ‘nanodispersants’ in the Gulf. From Dexter’s post,

Now as to the efficacy or dangers of the dispersant, I have to concur that it [nanodispersant] has not been tested. But it seems that the studies on the 118 oil-controlling products that have been approved for use by the EPA are lacking in some details as well. These chemicals were approved so long ago in some cases that the EPA has not been able to verify the accuracy of their toxicity data, and so far BP has dropped over a million gallons of this stuff into the Gulf.

Point well taken.

In looking at this website: gatewayfacts.ca, it seems the proponents for the Enbridge Northern Gateway project have supplied some additional information. Here’s what they’ve supplied regarding the project’s spill response (from the Gateway Facts environmental-responsibility/marine-protection page),

A spill response capacity 3x better than required

Emergency response equipment, crews and training staff will be stationed at key points and communities along the marine routes.

I did find a bit more on the website’s What if? page,

Marine response in action

Our spill response capacity will be more than 3x the current Canadian regulation. In addition, tanker escort tugs will carry emergency response and firefighting equipment to be able to respond immediately.

I don’t feel that any real concerns have been addressed by this minimalist approach to communication. Here are some of my questions,

  • What does 3x the current Canadian regulation mean in practical terms and how does this compare with the best safety regulations from an international perspective? Will there be efforts at continuous improvement?
  • Are there going to be any audits by outside parties of the company’s emergency response during the life of the project?
  • How will those audits be conducted? i.e., Will there be notice or are inspectors likely to spring the occasional surprise inspection?
  • What technologies are the proponents planning to use for the cleanup?
  • Is there any research being conducted on new remediation and cleanup technologies?
  • How much money is being devoted to this research and where is it being conducted (university labs, company labs, which countries)?

In light of concerns about environmental remediation technologies, it’s heartening to see this project on indiegogo which according to a Dec. 27, 2013 news item on Nanowerk focuses on an improved approach to remediation for water contaminated by oil,,

Environmental oil spill disasters such as BP’s Deepwater Horizon oil rig in the Gulf of Mexico have enormous environmental consequences, leading to the killing of marine creatures and contamination of natural water streams, storm water systems or even drinking water supplies. Emergency management organizations must be ready to confront such turbulences with effective and eco-friendly solutions to minimize the short term or long term issues.

There are many ineffective and costly conventional technologies for the remedy of oil spills like using of dispersants, oil skimmers, sand barrier berms, oil containment booms, by controlled burning of surface oil, bioremediation and natural degradation.

NAIMOR® – NAnostructure Innovative Material for Oil Recovery – is a three dimensional, nanostructure carbon material that can be produced in different shapes, dimensions. It is highly hydrophobic and can absorb a quantity of oil around 150 times its weight. Light, strong, and flexible, the material can be reused many times without losing its absorption capacity.

I’m not familiar with the researcher who’s making this proposal so I can’t comment on the legitimacy of the project but this does look promising (I have heard of other similar research using carbon-based materials), from the Naimor campaign on indiegogo,

Ivano Aglietto, an Italian engineer with a PhD in Environmental Engineering has devoted his profession for the production of most advanced and innovative nanostructure carbon materials and the industrial development of their proper use in applications for the environmental remediation.

His first invention was RECAM® (REactive Carbon Material), a revolutionary solution for oil spill recovery which had shown extraordinary results but with limitations of usage.

RECAM® is inert, non toxic, regenerable, reusable, eco friendly material and can absorb oil 90 times its weight. It is ferromagnetic in nature and can be recovered from water using magnetic field. The hydrocarbons absorbed can be burnt inorder to reuse the material and no toxic gases are released because of its inert and non-flammable nature. Their is also possibility of extracting the absorbed oil by squeezing the material or by vacuum filtration. Oil recovered does not contain any water because of the hydrophobic behaviour of RECAM®. Recovered oil can be reused as resource and the RECAM® for recovering oil. RECAM® is used for oil spill remediation and successfully passed the Artemia test.

RECAM® is being replaced with his new innovative nanostructure material, NAIMOR®.

…

NAIMOR® (NAnostructure Innovative Material for Oil Recovery) is a nanostructure material that can be produced in different shapes and dimensions with an incredible efficiency for oil recovery.

Main Characteristics and Properties

Can absorb quantity of oil 150 times its weight.
Inert, made of pure carbon, environmental friendly and no chemicals involved.
Highly hydrophobic and the absorbed oil does not contain any water.
Regenerable and can be used several times without producing any wastes.
It is a three dimensional nanostructure and can be produced in different shapes, dimensions [carpets, booms, sheets’.
Capable of recovering gallons of oil depending on the shape and dimensions of the carpet.

This indiegogo campaign is almost the antithesis of the gatewayfacts.ca website offering a wealth of information and detail including a discussion about the weaknesses associated with the various cleanup technologies that represent the ‘state of the art’. Here’s an image from the Naimor campaign page,

[downloaded from http://www.indiegogo.com/projects/naimor-nanostructure-innovative-material-for-oil-recovery]

[downloaded from http://www.indiegogo.com/projects/naimor-nanostructure-innovative-material-for-oil-recovery]

I believe this is a pelican somewhere on the Gulf of Mexico coastline where it was affected by the 2010 Deepwater Horizon oil spill. As for Aglietto’s project, you can find the NAIMOR website here.

* Changed ‘measure’ to ‘measures’ and ‘form’ to ‘from’ May 6, 2014.

NanoStruck, an Ontario (Canada) water remediation and ‘mining’ company

Leave a reply

Located in Mississauga, Ontario (Canada), Nanostruck’s Dec. 20, 2013 news release seems to be functioning as an announcement of its presence rather than any specific company developments,

NanoStruck has a suite of technologies that remove molecular sized particles using patented absorptive organic polymers. The company is sitting on some very incredible and environmently friendly technology.

Organic polymers are nature’s very own sponges. These versatile biomaterials are derived from crustacean shells or plant fibers, depending on requirements of their usage. Acting as molecular sponges, the nanometer-sized polymers are custom programmed toabsorb specific particles for remediation or retrieval purposes. These could be to clean out acids, hydrocarbons, pathogens, oils and toxins in water via its NanoPure solutions. Or to recover precious metal particles in mine tailings, such as gold, silver, platinum, palladium and rhodium using the Company’s NanoMet solutions.

By using patented modifications to conventional technologies and adding polymer-based nano-filtration, the Company’s offers environmentally safe NanoPure solutions for water purification. The Company uses Environmental Protection Agency (EPA) and World Health Organization (WHO) guidelines as a benchmark for water quality and safety to conform to acceptable agricultural or drinking water standards in jurisdictions where the technology is used. The worldwide shortage of cleanwater is highlighted on sites such as http://water.org/water-crisis/water-facts/water/.

The company’s NanoPure technology was first deployed to treat wastewater from a landfill site in January 2012 in Mexico. It has since been successfully treating and producing clean water there that’s certified by Conagua, the federal water commission of Mexico. The company has also created water treatment plants in Canada 

Additionally, the Company’s technology can be used to recover precious and base metals from mine tailings, which are the residual material from earlier mining activities. By retrieving valuable metals from old tailing dumps, the Company’s NanoMet solutions boosts the value of existing mining assets and reduces the need for new, costly and potentially environmentally harmful exploration and mining. 

There is an estimated $1 trillion worth of precious metals already extracted from the ground sitting in old mining sites that form our target market. We are in the process of deploying precious metal recovery plants in South Africa, Mexico and Canada.

The company is also developing new plant-based organic polymers to remove contaminants specific to the oil industry, such as naphthenic acids, which is a growing problem.

 Company information is available at www.nanostruck.ca and some description of the companies polymers are below

General Description of Nano Filtration Materials

Chitosan is a polysaccharide-based biomaterial derived from renewable feedstock such as the shells of crustaceans.  Chitosan displays limited adsorbent properties toward various types of contaminants (i.e. petrochemicals, pharmaceuticals, & agrochemicals).  By comparison, synthetically engineered biomaterials that utilize chitosan building blocks display remarkable sorption properties that are tunable toward various types of water borne contaminants.  Recent advances in materials science have enabled the development of Nano Filtration media with relative ease, low toxicity, and tunable molecular properties for a wide range of environmental remediation applications.  …

From what I can tell, the company has technology that can be used to remediate water (NanoPure) and, in the case of remediating mine tailings (NanoMet), allows for reclamation of the metals. It’s the kind of technology that can make you feel virtuous (reclaiming water) with the potential of paying you handsomely (reclaiming gold, etc.).

As I like to do from time to time, I followed the link to the water organization listed in the news release and found this on Water.org’s About Us page,

The water and sanitation problem in the developing world is far too big for charity alone. We are driving the water sector for new solutions, new financing models, greater transparency, and real partnerships to create lasting change. Our vision: Safe water and the dignity of a toilet for all, in our lifetime.

Co-founded by Matt Damon and Gary White, Water.org is a nonprofit organization that has transformed hundreds of communities in Africa, South Asia, and Central America by providing access to safe water and sanitation.

Water.org traces its roots back to the founding of WaterPartners International in 1990. In July 2009, WaterPartners merged with H2O Africa, resulting in the launch of Water.org. Water.org works with local partners to deliver innovative solutions for long-term success. Its microfinance-based WaterCredit Initiative is pioneering sustainable giving in the sector.

Getting back to NanoStruck, here’s more from their About page,

NanoStruck Technologies Inc. is a Canadian Company with a suite of technologies that remove molecular sized particles using patented absorptive organic polymers. These versatile biomaterials are derived from crustacean shells or plant fibers, depending on requirements of their usage. Acting as molecular sponges, the nanometer-sized polymers are custom programmed toabsorb specific particles for remediation or retrieval purposes. These could be to clean out acids, hydrocarbons, pathogens, oils and toxins in water via its NanoPure solutions. Or to recover precious metal particles in mine tailings, such as gold, silver, platinum, palladium and rhodium using the Company’s NanoMet solutions.

By using patented modifications to conventional technologies and adding polymer-based nano-filtration, the Company’s offers environmentally safe NanoPure solutions for water purification. The Company uses Environmental Protection Agency (EPA) and World Health Organization (WHO) guidelines as a benchmark for water quality and safety to conform to acceptable agricultural or drinking water standards in jurisdictions where the technology is used.

…

The Company’s current business model is based on either selling water remediation plants or leasing out units and charging customers on a price per liter basis with a negotiated minimum payment per annum. For processing mine tailings, the value of precious metal recovered is shared with tailing site owners on a pre-agreed basis.

I wonder if there are any research papers about the January 2012 work in Mexico. I find there is a dearth of technical information on the company’s website, which is somewhat unusual for a startup company (my experience is that they give you too much technical information in a fashion that is incomprehensible to anyone other than en expert). As well, I’m not familiar with any members of the company’s management team (Our Team webpage) but, surprisingly, there isn’t a Chief Science Officer or someone on the team from the science community. In fact, the entire team seems to have emerged from the business community. If I have time, I’ll see about getting an interview for publication here in 2014. In the meantime, it looks like a company with some interesting potential and I wish it well.

(Note: This is not endorsement or anti-endorsement of the company or its business. This is not my area of expertise.)

Grand Challenges Canada funds 83 projects to improve global health

Leave a reply

For the third year in a row (as per my Dec. 22, 2011 posting and my Nov. 22, 2012 posting), I’m featuring Grand Challenges Canada funding for its ‘Stars in Global Health’ programme . From the Grand Challenges Canada (GCC) Nov. 21, 2013 news release,

Imaginative: 83 Bold Innovations to Improve Global Health Receive Grand Challenges Canada Funding

Among novel ideas to reduce disease, save lives in developing world:
Diagnostic diapers to detect deadly rotavirus; Rolling water barrel;
Special yogurt offsets pesticides, heavy metals, toxins in food;
Inventive shoe, boot material releases bug repellent when walking

50 innovators from low- and middle-income countries,
plus 33 from Canada, share $9.3 million in seed grants

Grand Challenges Canada, funded by the Government of Canada, today extends seed grants of $100,000 each to 83 inventive new ideas for addressing health problems in resource-poor countries.

The Grand Challenges Canada “Stars in Global Health” program seeks breakthrough and affordable innovations that could transform the way disease is treated in the developing world — innovations that may benefit the health of developed world citizens as well.

Of the 83 grants announced today, 50 are given to innovators in 15 low- and middle-income nations worldwide and 33 to Canadian-originated projects, to be implemented in a total of 30 countries throughout the developing world.

“Innovation powers development leading to better health and more jobs. I feel proud that Canada, through Grand Challenges Canada, has supported almost 300 bold ideas to date in our Stars in Global Health program,” says Dr. Peter A. Singer, Chief Executive Officer of Grand Challenges Canada.  “This is one of the largest pipelines of innovations in global health in the world today.”

Says the Honourable Christian Paradis, Canadian Minister of International Development and Minister for La Francophonie: “Grand Challenges Canada’s portfolio of projects shows how innovators with bold ideas have the potential to make a big impact on global health.  By connecting game-changing ideas with some of the most pressing global health challenges, these projects will lead to sustainable and affordable health solutions in low- and middle-income countries.”

The portfolio of 83 creative, out-of-the-box ideas, selected through independent peer review from 451 applications, includes projects submitted by social entrepreneurs, private sector companies and non-government organizations as well as university researchers.  Among them:

Diagnostics

  • …
  • A simple, portable, dry, yeast-based blood screening test (Belize, Jamaica).  WHO estimates almost half of 46 million blood donations in low-income countries are inadequately tested;  in Africa up to 10% of new HIV infections are caused by transfusions.  A University of Toronto-developed yeast-based blood screening tool will detect combinations of diseases. Like baking yeast, it can be stored dry, and can be grown locally with minimal equipment and training, improving accessibility in rural areas.
  • A bedside, Litmus paper-like test to detect bronchitis (Brazil, India). Being pioneered at McMaster University with international collaborators, a simple sputum test will detect infectious and allergic bronchitis in adults and children, reducing mis-diagnosis in developing countries and saving resources: time, steroids, antibiotics.
  • …
  • …

Water, sanitation, hygiene and general health

  • Special yogurts formulated to offset the harm to health caused by heavy metals, pesticides and other toxics in food (Africa).  Between 2006-2009 in Nairobi, only 17% of the total maize sampled and 5% of feed was fit for human and animal consumption respectively. University of Western Ontario researchers have developed novel yogurts containing a bacteria that, in the stomach, sequesters certain toxins and heavy metals and degrades some pesticides.
  • …
  • Addressing arsenic-laced groundwater. In Bangladesh, 1 in 5 deaths (600,000 per year) occur due to groundwater arsenic, dubbed by WHO as the largest mass poisoning in history, with some 77 million people at risk.  Project 1) Toronto-based PurifAid will deploy new filtration units via franchised villagers who will filter and deliver purified water, perform maintenance, acquire new filters and dispose of old ones, which can be used to produce biofuels.  Project 2) A project based at the University of Calgary, meanwhile, will work to increase the use of Western Canadian lentils in Bangladeshi diets.  The crop is rich in selenium, which can decrease arsenic levels and improve health.
  • “WaterWheel” (India, Kenya, Mongolia).  This simple, innovative device from India is a wheeled water container that enables the collection and transport of 3 to 5 times as much water as usual per trip, as well as hygienic storage, saving valuable time for productive activities and improving health.

Malaria

  • A vaccine based on a newly-discovered antibody in men that prevents malaria infection in the placenta (Benin, Colombia).  Colombian men exposed to malaria are found to have antibodies that can prevent infection in the placenta of a pregnant woman. This University of Alberta finding forms the basis for developing a novel vaccine against several forms of malaria, which cause 10,000 maternal deaths and 200,000 stillbirths annually.
  • Insect-repellent clothing, footwear and wall plaster (East Africa).  1) In Tanzania, the Africa Technical Research Institute will lead the design and manufacture of attractive, affordable insecticide-treated clothing while 2) the Ifakara Health Institute will develop anti-mosquito footwear material that slowly releases repellents from the friction of walking.  A key advantage: no compliance or change in habits required.  3) Uganda’s Med Biotech Laboratories, meanwhile, will produce a colorful, insecticide-infused ‘plaster’ for the outside walls of African village homes.

Maternal and child health

  • …
  • Mothers Telling Mothers: improving maternal health through storytelling (Uganda).  Work by Twezimbe Development Association has found that stories told by mothers in their own words and reflecting shared realities are most likely to increase the number of moms seeking skilled health care, and convince policymakers to improve healthcare access.  This project will capture 3 to 5 minutes stories to be shared through digital media platforms and health clinics.
  • …

Mobile technology

  • Digital African Health Library (Sub-Saharan Africa).  The University of Calgary-led project is creating an app to support bedside care by medical doctors in Africa: a smartphone-accessible resource providing evidence-based, locally-relevant decision support and health information.  A pilot involving 65 doctors in Rwanda showed point of care answers to patient questions more than tripled to 43%, with self-reported improvement in patient outcomes.

Health care

  • Simple sticker helps track clean surfaces in healthcare facilities (Philippines).  WHO estimates that 10% to 30% of all patients in developing country health care facilities acquire an infection.   An innovative sticker for hospital surfaces developed by Lunanos Inc. changes colour when a cleaner is applied and fades color after a predetermined period of time, helping staff track and ensure cleanliness of equipment and other frequently touched surfaces.
  • “Mystery clients” to assess and improve quality of TB care (India).  India accounts for 25% of global tuberculosis (TB) incidence.  To evaluate variations in practice quality, and identify ways to improve TB management in India, this project, led by Canada’s McGill University, will send researchers into clinics posing as a patient with standard TB symptoms.  The project builds on earlier work related to angina, asthma and dysentery, which revealed incorrect diagnoses and treatment.

And many more.

A complete set of 83 short project descriptions, with links to additional project details, available photos / video, and local contact information, is available in the full news release online here: http://bit.ly/HOLt5b

Here’s a video for the one of the projects (filtering arsenic out of Bangladesh’s water),

I chose this project somewhat haphazardly. It caught my attention as I have written more than once about purification efforts and as it turns out, this is a Canada-based project (with a Bangladeshi partner, BRAC) from the University of Toronto.

You may have heard the video’s narrator mention scotch whiskey, here’s why (from the YouTube page hosting the project video,page),

We plan to roll out a new generation of filtration units which run on an organic by-product of the beverage industry. The units address many of the failings of existing devices (they require no power or chemicals and are very low maintenance).

This project gets still more interesting (from the full project description page),

Device for the Remediation and Attenuation of Multiple Pollutants (DRAM) removes 95% of arsenic from contaminated water within 5 minutes of exposure. With an estimated 600,000 deaths directly attributable to arsenic poisoning every year, these units hold the potential to save millions of lives. Existing solutions are too complicated and suffer from significant usability issues (2012 UNICEF study).

We will deploy our units through a franchise business model. [emphasis mine] Local villagers will filter and deliver purified water, perform maintenance, acquire new media, and dispose spent media. The current market leader, the Sono Filter, has less than 20% uptake (according to UNICEF). DRAM costs only 25% of this solution, has lower maintenance requirements (4-6 month media cycle vs. 2 week media cycle), higher durability, and can be retrofitted onto existing tube wells villagers use thereby requiring no behavior change. The spent media (which must be replaced every 4-6 months) can be used to produce biofuels, giving PurifAid a decisive capability over competitors.

With the assistance of our local partner BRAC (ranked #1 on Global Journal’s list of top NGOs in 2012) we will retrofit our units onto existing tubewells. Contaminated water is pumped from the tubewell into the unit where it passes into the bottom of the unit, rising up through a bed of the organic filter media, binding the arsenic. Clean water is displaced and forced out of the top of the unit and out through the built-in tap. Our community based solution will begin with a proof-of-concept installation in the Mujibnagar District (pop. 1.3 million). BRAC will assist in testing our filter water quality on the ground and these results will be used to obtain regulatory approval for our technology. We will then operationalize our community-run DRAM systems. A council of local stakeholders will nominate prospective franchisees amongst villagers. These villagers will replace filter media in 4 month intervals and order annual delivery of new media. We are securing partnerships with nearby distilleries to locally source the filter media. [emphasis mine] Disposal will be handled by a local caretaker who will store spent media in bulk before transferring it for use as biofuel. Caretaker salary, media sourcing, and delivery costs will be paid by charging a levy on customer households. PurifAid will monitor behavioural and health indicators to ascertain DRAM’s immediate and long-term impact. To this end PurifAid has partnered with Ashalytics, a start-up global health analytics company, to report operational issues, measure impact, and communicate important metrics to key staff and stakeholders via mobile phones. This results in an environmentally-friendly value chain that uses beverage industry waste, maximizing positive impact. If the Bangladesh installations are a success then this system can be introduced across the Indian subcontinent and in west Africa, where arsenic in groundwater poses a serious health problem. DRAM has the potential to improve the lives of millions globally.

After 18 months we envisage having installed 15 DRAM systems supplying 45 liters of purified water per day to 2,700 households. In order to ensure maintenance, 15 paid caretakers will operate the pumps and a driver will supply the caretakers with fresh media every 4-6 months. Biannually, new bulk media will be provided to storage unit in the village, spent media will in turn be taken to a plant and converted to biofuel. Villagers will invest collectively to purchase, install and operate DRAM on pre-existing tube wells – thus no behavioral changes needed.

Our filters employ a new water filtration technology. Our franchise model involves social and business innovation, empowering communities to manage their own water treatment under the stewardship of a local partner that manages 17 social businesses with combined annual revenues of $93m in 2011.

(Aside: Don’t they ask for a ‘dram’ of whiskey in the movies?) This project is intended to do more than purify water; it’s designed to create jobs. Bravo!

Now back to the news release for details about the countries and agencies involved,

The global portfolio of grants, broken down by region and country:

30 projects based in 6 African countries (16 in Kenya, 5 in Tanzania, 5 in Uganda, 2 in Nigeria and 1 each in Senegal and Ghana)
17 projects based in 7 countries in Asia (7 in India, 2 in Pakistan 4 in Thailand and 1 each in Bangladesh, Cambodia, Mongolia and the Philippines)
Two projects based in South America (Peru) and one in Europe (Armenia)
33 projects based in 11 Canadian cities (14 in Toronto, 3 each in Calgary, Montreal and Vancouver, 2 each in Winnipeg, Edmonton and London, and 1 each in Halifax, Hamilton, Ottawa and Saskatoon)

The Canadian-based projects will be implemented worldwide (a majority of them implemented simultaneously in more than one country):

15 countries in Africa (5 in Kenya, 4 in Tanzania, 3 each in Uganda and Ethiopia, 2 each in Rwanda, Somalia, South Africa, South Sudan, and Zambia, and 1 each in Benin, Botswana, Ghana,  Malawi, Nigeria, and DR Congo)
8 countries in Asia (8 in India, 6 in Bangladesh, 1 each in Bhutan, China, Nepal, Pakistan, Philippines and Thailand)
5 countries in South and Latin America (Belize, Brazil, Colombia, Jamaica, Peru.) and
1 in the Middle East (Egypt)

Including today’s grants, total investments to date under the Grand Challenges Canada “Stars in Global Health” program is $32 million in 295 projects.

For full details: http://bit.ly/HOLt5b

* * * * *

About Grand Challenges Canada

Grand Challenges Canada is dedicated to supporting Bold Ideas with Big Impact in global

health. We are funded by the Government of Canada through the Development Innovation Fund announced in the 2008 Federal Budget. We fund innovators in low- and middle-income countries and Canada. Grand Challenges Canada works with the International Development Research Centre (IDRC), the Canadian Institutes of Health Research (CIHR), and other global health foundations and organizations to find sustainable, long-term solutions through Integrated Innovation − bold ideas that integrate science, technology, social and business innovation. Grand Challenges Canada is hosted at the Sandra Rotman Centre.

Please visit grandchallenges.ca  and look for us on Facebook, Twitter, YouTube and LinkedIn.

About Canada’s International Development Research Centre

The International Development Research Centre (IDRC) supports research in developing countries to promote growth and development. IDRC also encourages sharing this knowledge with policymakers, other researchers and communities around the world. The result is innovative, lasting local solutions that aim to bring choice and change to those who need it most. As the Government of Canada’s lead on the Development Innovation Fund, IDRC draws on decades of experience managing publicly funded research projects to administer the Development Innovation Fund. IDRC also ensures that developing country researchers and concerns are front and centre in this exciting new initiative.

www.idrc.ca

About Canadian Institutes of Health Research

The Canadian Institutes of Health Research (CIHR) is the Government of Canada’s health research investment agency. CIHR’s mission is to create new scientific knowledge and to enable its translation into improved health, more effective health services and products, and a strengthened Canadian health care system. Composed of 13 Institutes, CIHR provides leadership and support to more than 14,100 health researchers and trainees across Canada. CIHR will be responsible for the administration of international peer review, according to international standards of excellence. The results of CIHR-led peer reviews will guide the awarding of grants by Grand Challenges Canada from the Development Innovation Fund.

www.cihr-irsc.gc.ca

About the Department of Foreign Affairs, Trade and Development Canada

The mandate of Foreign Affairs, Trade and Development Canada is to manage Canada’s diplomatic and consular relations, to encourage the country’s international trade, and to lead Canada’s international development and humanitarian assistance.

www.international.gc.ca

About Sandra Rotman Centre

The Sandra Rotman Centre is based at University Health Network and the University of Toronto. We develop innovative global health solutions and help bring them to scale where they are most urgently needed. The Sandra Rotman Centre hosts Grand Challenges Canada.

www.srcglobal.org

I have found it confusing that there’s a Grand Challenges Canada and the Bill and Melinda Gates Foundation has a Grand Challenges programme, both of which making funding announcements at this time of year. I did make some further investigations which I noted in my Dec. 22, 2011 posting,

Last week, the Bill & Melinda Gates Foundation announced a $21.1 M grant over three years for research into point-of-care diagnostic tools for developing nations. A Canadian nongovermental organization (NGO) will be supplementing this amount with $10.8 M for a total of $31.9 M. (source: Dec. 16, 2011 AFP news item [Agence France-Presse] on MedicalXpress.com)

At this point, things get a little confusing. The Bill & Melinda Gates Foundation has a specific program called Grand Challenges in Global Health and this grant is part of that program. Plus, the Canadian NGO is called Grand Challenges Canada (couldn’t they have found a more distinctive name?), which is funded by a federal Canadian government initiative known as the Development Innovation Fund (DIF). …

Weirdly, no one consulted with me when they named the Bil & Melinda Gates Foundation programme or the Canadian NGO.

Graphene and radioactive waste

Leave a reply

In fact, the material in question is graphene oxide and researchers at Rice University (Texas) and Lomonosov Moscow State University have found that it can rapidly remove radioactive material from water  From the Jan. 8, 2013 news item on ScienceDaily,

A collaborative effort by the Rice lab of chemist James Tour and the Moscow lab of chemist Stepan Kalmykov determined that microscopic, atom-thick flakes of graphene oxide bind quickly to natural and human-made radionuclides and condense them into solids. The flakes are soluble in liquids and easily produced in bulk.

The Rice University Jan. 8, 2013 news release, which originated the news item, was written by Mike Williams and provides additional insight and quotes from the researchers (Note: Links have been removed),

The discovery, Tour said, could be a boon in the cleanup of contaminated sites like the Fukushima nuclear plants damaged by the 2011 earthquake and tsunami. It could also cut the cost of hydraulic fracturing (“fracking”) for oil and gas recovery and help reboot American mining of rare earth metals, he said.

Graphene oxide’s large surface area defines its capacity to adsorb toxins, Kalmykov said. “So the high retention properties are not surprising to us,” he said. “What is astonishing is the very fast kinetics of sorption, which is key.”

“In the probabilistic world of chemical reactions where scarce stuff (low concentrations) infrequently bumps into something with which it can react, there is a greater likelihood that the ‘magic’ will happen with graphene oxide than with a big old hunk of bentonite,” said Steven Winston, a former vice president of Lockheed Martin and Parsons Engineering and an expert in nuclear power and remediation who is working with the researchers. “In short, fast is good.”

Here’s how it works (from the news release; Note: Links have been removed),

The researchers focused on removing radioactive isotopes of the actinides  and lanthanides  – the 30 rare earth elements in the periodic table – from liquids, rather than solids or gases. “Though they don’t really like water all that much, they can and do hide out there,” Winston said. “From a human health and environment point of view, that’s where they’re least welcome.”

Naturally occurring radionuclides are also unwelcome in fracking fluids that bring them to the surface in drilling operations, Tour said. “When groundwater comes out of a well and it’s radioactive above a certain level, they can’t put it back into the ground,” he said. “It’s too hot. Companies have to ship contaminated water to repository sites around the country at very large expense.” The ability to quickly filter out contaminants on-site would save a great deal of money, he said.

He sees even greater potential benefits for the mining industry. Environmental requirements have “essentially shut down U.S. mining of rare earth metals, which are needed for cell phones,” Tour said. “China owns the market because they’re not subject to the same environmental standards. So if this technology offers the chance to revive mining here, it could be huge.”

Tour said that capturing radionuclides does not make them less radioactive, just easier to handle. “Where you have huge pools of radioactive material, like at Fukushima, you add graphene oxide and get back a solid material from what were just ions in a solution,” he said. “Then you can skim it off and burn it. Graphene oxide burns very rapidly and leaves a cake of radioactive material you can then reuse.”

The low cost and biodegradable qualities of graphene oxide should make it appropriate for use in permeable reactive barriers, a fairly new technology for in situ groundwater remediation, he said.

Romanchuk, Slesarev, Kalmykov and Tour are co-authors of the paper with Dmitry Kosynkin, a former postdoctoral researcher at Rice, now with Saudi Aramco. Kalmykov is radiochemistry division head and a professor at Lomonosov Moscow State University. Tour is the T.T. and W.F. Chao Chair in Chemistry as well as a professor of mechanical engineering and materials science and of computer science at Rice.

Here’s a ‘before’ shot of solution with graphene oxide and an ‘after’ shot where radionuclides have been added and begun to clump,

A new method for removing radioactive material from solutions is the result of collaboration between Rice University and Lomonosov Moscow State University. The vial at left holds microscopic particles of graphene oxide in a solution. At right, graphene oxide is added to simulated nuclear waste, which quickly clumps for easy removal. Image by Anna Yu. Romanchuk/Lomonosov Moscow State University

A new method for removing radioactive material from solutions is the result of collaboration between Rice University and Lomonosov Moscow State University. The vial at left holds microscopic particles of graphene oxide in a solution. At right, graphene oxide is added to simulated nuclear waste, which quickly clumps for easy removal. Image by Anna Yu. Romanchuk/Lomonosov Moscow State University

As noted in the ScienceDaily news item, the research has been published in the Royal Society’s Physical Chemistry Chemical Physics journal,

Anna Yu. Romanchuk, Alexander Slesarev, Stepan N. Kalmykov, Dmitry Kosynkin, James M Tour. Graphene Oxide for Effective Radionuclide Removal. Physical Chemistry Chemical Physics, 2012; DOI: 10.1039/C2CP44593J

This article is behind a paywall.