Category Archives: clothing

Wood pulp and pomegranate peels as clothing

Leave a reply

Lilly Smith’s Sept. 11, 2020 article for Fast Company profiles a new article of clothing from Volllebak (first mentioned here in a March 11, 2019 posting titled: It’s a very ‘carbony’ time: graphene jacket, graphene-skinned airplane, and schwarzite),

…

The Vollebak hoodie is made out of sustainably sourced eucalyptus and beech trees. The wood pulp from the trees is then turned into a fiber through a closed-loop production process (99% of the water and solvent used to turn pulp into fiber is recycled and reused). The fiber is then woven into the fabric you pull over your head.

The hoodie is a light green because it’s dyed with pomegranate peels, which typically are thrown out. The Vollebak team went with pomegranate as the natural dye for the hoodie for two reasons: It’s high in a biomolecule called tannin, which makes it easy to extract natural dye, and the fruit can withstand a range of climates (it loves heat but can tolerate temperatures as low as 10 degrees). Given that the material is “robust enough to survive our planet’s unpredictable future,” according to Vollebak cofounder Nick Tidball, it’s likely to remain a reliable part of the company’s supply chain even as global warming causes more extreme weather patterns.

… the hoodie won’t degrade from normal wear and tear—it needs fungus, bacteria, and heat in order to biodegrade (sweat doesn’t count). It will take about 8 weeks to decompose if buried in compost, and up to 12 if buried in the ground—the hotter the conditions, the faster it breaks down. “Every element is made from organic matter and left in its raw state,” says Steve Tidball, Vollebak’s other cofounder (and Nick’s twin brother). “There’s no ink or chemicals to leach into the soil. Just plants and pomegranate dye, which are organic matter. So when it disappears in 12 weeks, nothing is left behind.”

…

The article hosts a picture of the hoodie as does Vollebak website’s Product, Plant and Pomegranate Hoodie webpage,

Plant and Pomegranate Hoodie. Built from eucalyptus trees and dyed in a giant vat of fruit. The waiting list is now open.

5,000 years ago our ancestors made their clothes from nature, using grass, tree bark, animal skins and plants. We need to get back to the point where you could throw your clothes away in a forest and nature would take care of the rest. The Plant and Pomegranate Hoodie feels like a normal hoodie, looks like a normal hoodie, and lasts as long as a normal hoodie. The thing that makes it different is simply the way it starts and ends its life. All the materials we’ve used were grown in nature. Each hoodie is made from eucalyptus trees from sustainably managed forests before being submerged in a giant vat of pomegranate dye to give it its colour. As it’s made entirely from plants, the hoodie is fully biodegradable and compostable. When you decide your hoodie has reached the end of its life – whether that’s in 3 years’ time or 30 – you can put it out with the compost or bury it in your garden. Because the hoodie that starts its life in nature is designed to end up there too. Launching September 2020, the waiting list is now open.

Not much information, eh? I found the same dearth of detail the last time I looked for more technical information about a Vollebak product (their graphene jacket).

As for composting or burying the hoodies, how does that work? I live in an apartment building; I don’t think composting is allowed in my apartment and the building owners will likely get upset if I start digging holes in the front yard. There is a park nearby but it is city property and I’m pretty sure that digging into it to bury a hoodie will turn out to be illegal.

There is a recycling bin for organics but I don’t know if the businesses tasked with picking up the organic refuse and dealing with it will be familiar with biodegradable hoodies and I ‘m not sure hoodie disposal in the organics would be allowed by the city, which oversees the recycling programme.

These are not insurmountable problems but if people want to be mindful about their purchases and future disposal of said purchases, research may be needed.

Clothing that reflects your thoughts?

Leave a reply

First, there was a dress that reflected your emotions. Now, apparently, there’s a dress that reflects your thoughts. Frankly, I don’t understand why anyone would want clothing that performed either function. However, I’m sure there’s an extrovert out there who’s equally puzzled abut my take on this matter.

Emotion-reading dress

Before getting to this latest piece of wearable technology, the mind-reading dress, you might find this emotional sensing dress not only interesting but eerily similar,

Here’s more from the video’s YouTube webpage,

Philips Design has developed a series of dynamic garments as part of the ongoing SKIN exploration research into the area known as emotional sensing. The garments, which are intended for demonstration purposes only, demonstrate how electronics can be incorporated into fabrics and garments in order to express the emotions and personality of the wearer. The marvelously intricate wearable prototypes include Bubelle, a dress surrounded by a delicate bubble illuminated by patterns that changed dependent on skin contact- and Frison, a body suit that reacts to being blown on by igniting a private constellation of tiny LEDs. Sensitive rather than intelligent These garments were developed as part of the SKIN research project, which challenges the notion that our lives are automatically better because they are more digital. It looks at more analog phenomena like emotional sensing and explores technologies that are sensitive rather than intelligent. SKIN belongs to the ongoing, far-future research program carried out at Philips Design. The aim of this program is to identify emerging trends and likely societal shifts and then carry out probes that explore whether there is potential for Philips in some of the more promising areas. Rethinking our interaction with products and content According to Clive van Heerden, Senior Director of design-led innovation at Philips Design, the SKIN probe has a much wider context than just garments. As our media becomes progressively more virtual, it is quite possible in long term future that we will no longer have objects like DVD players, or music contained on disks, or books that are actually printed. An opportunity is therefore emerging for us to completely rethink our interaction with products and content. More info: http://www.design.philips.com/about/d…

I first heard about the dress at the 2009 International Symposium of Electronic Arts (2009 ISEA held in Belfast, Norther Ireland and Dublin, Ireland). Clive van Heerden who was then working for Philips Design (it’s part of a Dutch multinational originally known widely for its Philips light bulbs and called Royal Philips Electronics) opened vHM Design Futures in 2011 with Jack Mama in London (UK). Should you be curious as to how the project is featured on vHM, check out 2006 SKIN: DRESSES.

Mind-reading dress

Moving on from emotion-sensing clothes to mind-reading clothes,

Mark Wilson’s August 31, 2020 article for Fast Company reflects a sanguine approach to clothing that broadcasts your ‘thoughts’ (Note: Links have been removed),

…

… what if your clothing were a direct reflection on yourself? What if it could literally visualize what you were thinking? That’s the idea of the Pangolin Scales Project, a new brain-reading dress by Dutch fashion designer Anouk Wipprecht [of Anouk Wipprecht FashionTech], with support from the Institute for Integrated Circuits at JKU [Johannes Kepler University Linz] and G.tec medical engineering.

…

… A total of 1,024 brain-reading EEG sensors are placed on someone’s head to measure the electrical activity inside their brain. These sensors have a faceted design that resembles the keratin scales of a pangolin.

… It’s not a message that you can understand just by looking at it. You won’t suddenly know if someone is hungry or thinking of their favorite book just because they’re wearing this dress. But it’s still a captivating visualization of the innermost working of someone’s mind, as well as a proof point: Maybe one day, you really will be able to judge a book by its cover, because that cover will say it all.

Whether you consider the projects to be analog or digital, they raise interesting questions about privacy.

Arc’teryx performance apparel and University of British Columbia (Canada) scientists stay green and dry

Leave a reply

As rainy season approaches in the Pacific Northwest of Canada and the US, there’s some good news about a sustainable water- and oil-repellent fabric. Sadly, it won’t be available this year but it’s something to look forward to.

An August 10, 2020 news item on phys.org announces the news from the University of British Columbia (UBC) about a greener, water-repellent fabric,

A sustainable, non-toxic and high-performance water-repellent fabric has long been the holy grail of outdoor enthusiasts and clothing companies alike. New research from UBC Okanagan and outdoor apparel giant Arc’teryx is making that goal one step closer to reality with one of the world’s first non-toxic oil and water-repellent performance textile finishes.

…

An August 10, 2020 UBC Okanagan news release (also on EurekAlert), which originated the news item, provides more detail,

Outdoor fabrics are typically treated with perfluorinated compounds (PFCs) to repel oil and water. But according to Sadaf Shabanian, doctoral student at UBC Okanagan’s School of Engineering and study lead author, PFCs come with a number of problems.

“PFCs have long been the standard for stain repellents, from clothing to non-stick frying pans, but we know these chemicals have a detrimental impact on human health and the environment,” explains Shabanian. “They pose a persistent, long-term risk to health and the environment because they take hundreds of years to breakdown and linger both in the environment and our bodies.”

According to Mary Glasper, materials developer at Arc’teryx and collaborator on the project, these lasting impacts are one of the major motivations for clothing companies to seek out new methods to achieve the same or better repellent properties in their products.

To solve the problem, Shabanian and the research team added a nanoscopic layer of silicone to each fibre in a woven fabric, creating an oil-repellent jacket fabric that repels water, sweat and oils.

By understanding how the textile weave and fibre roughness affect the liquid interactions, Shabanian says she was able to design a fabric finish that did not use any PFCs.

“The best part of the new design is that the fabric finish can be made from biodegradable materials and can be recyclable,” she says. “It addresses many of the issues related to PFC-based repellent products and remains highly suitable for the kind of technical apparel consumers and manufacturers are looking for.”

Arc’teryx is excited about the potential of this solution.

“An oil- and water-repellent finish that doesn’t rely on PFCs is enormously important in the world of textiles and is something the whole outdoor apparel industry has been working on for years,” says Glasper. “Now that we have a proof-of-concept, we’ll look to expand its application to other DWR-treated textiles used in our products and to improve the durability of the treatment.”

“Working to lessen material impacts on the environment is crucial for Arc’teryx to meet our goal of reducing our greenhouse gas emissions by 65 per cent in intensity by 2030,” she adds.

Kevin Golovin, principal investigator of the Okanagan Polymer Engineering Research & Applications Lab where the research was done, says the new research is important because it opens up a new area of green textile manufacturing.

He explains that while the new technology has immense potential, there are still several more years of development and testing needed before people will see fabrics with this treatment in stores.

“Demonstrating oil repellency without the use of PFCs is a critical first step towards a truly sustainable fabric finish,” says Golovin. “And it’s something previously thought impossible.”

The research is funded through a grant from the Natural Sciences and Engineering Research Council of Canada (NSERC), with support from Arc’teryx Equipment Inc.

Arc’teryx is based in North Vancouver (Canada).

Here’s a link to and a citation for the paper,

Rational design of perfluorocarbon-free oleophobic textiles by Sadaf Shabanian, Behrooz Khatir, Ambreen Nisar & Kevin Golovin. Nature Sustainability (2020) DOI: https://doi.org/10.1038/s41893-020-0591-9 Published: 10 August 2020

This paper is behind a paywall.

Suit up with nanofiber for protection against explosions and high temperatures

Leave a reply

Where explosions are concerned you might expect to see some army research and you would be right. A June 29, 2020 news item on ScienceDaily breaks the news,

Since World War I, the vast majority of American combat casualties has come not from gunshot wounds but from explosions. Today, most soldiers wear a heavy, bullet-proof vest to protect their torso but much of their body remains exposed to the indiscriminate aim of explosive fragments and shrapnel.

Designing equipment to protect extremities against the extreme temperatures and deadly projectiles that accompany an explosion has been difficult because of a fundamental property of materials. Materials that are strong enough to protect against ballistic threats can’t protect against extreme temperatures and vice versa. As a result, much of today’s protective equipment is composed of multiple layers of different materials, leading to bulky, heavy gear that, if worn on the arms and legs, would severely limit a soldier’s mobility.

Now, Harvard University researchers, in collaboration with the U.S. Army Combat Capabilities Development Command Soldier Center (CCDC SC) and West Point, have developed a lightweight, multifunctional nanofiber material that can protect wearers from both extreme temperatures and ballistic threats.

…

A June 29, 2020 Harvard University news release (also on EurekAlert) by Leah Burrows, which originated the news item, expands on the theme,

“When I was in combat in Afghanistan, I saw firsthand how body armor could save lives,” said senior author Kit Parker, the Tarr Family Professor of Bioengineering and Applied Physics at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and a lieutenant colonel in the United States Army Reserve. “I also saw how heavy body armor could limit mobility. As soldiers on the battlefield, the three primary tasks are to move, shoot, and communicate. If you limit one of those, you decrease survivability and you endanger mission success.”

“Our goal was to design a multifunctional material that could protect someone working in an extreme environment, such as an astronaut, firefighter or soldier, from the many different threats they face,” said Grant M. Gonzalez, a postdoctoral fellow at SEAS and first author of the paper.

In order to achieve this practical goal, the researchers needed to explore the tradeoff between mechanical protection and thermal insulation, properties rooted in a material’s molecular structure and orientation.

Materials with strong mechanical protection, such as metals and ceramics, have a highly ordered and aligned molecular structure. This structure allows them to withstand and distribute the energy of a direct blow. Insulating materials, on the other hand, have a much less ordered structure, which prevents the transmission of heat through the material.

Kevlar and Twaron are commercial products used extensively in protective equipment and can provide either ballistic or thermal protection, depending on how they are manufactured. Woven Kevlar, for example, has a highly aligned crystalline structure and is used in protective bulletproof vests. Porous Kevlar aerogels, on the other hand, have been shown to have high thermal insulation.

“Our idea was to use this Kevlar polymer to combine the woven, ordered structure of fibers with the porosity of aerogels to make long, continuous fibers with porous spacing in between,” said Gonzalez. “In this system, the long fibers could resist a mechanical impact while the pores would limit heat diffusion.”

The research team used immersion Rotary Jet-Spinning (iRJS), a technique developed by Parker’s Disease Biophysics Group, to manufacture the fibers. In this technique, a liquid polymer solution is loaded into a reservoir and pushed out through a tiny opening by centrifugal force as the device spins. When the polymer solution shoots out of the reservoir, it first passes through an area of open air, where the polymers elongate and the chains align. Then the solution hits a liquid bath that removes the solvent and precipitates the polymers to form solid fibers. Since the bath is also spinning — like water in a salad spinner — the nanofibers follow the stream of the vortex and wrap around a rotating collector at the base of the device.

By tuning the viscosity of the liquid polymer solution, the researchers were able to spin long, aligned nanofibers into porous sheets — providing enough order to protect against projectiles but enough disorder to protect against heat. In about 10 minutes, the team could spin sheets about 10 by 30 centimeters in size.

To test the sheets, the Harvard team turned to their collaborators to perform ballistic tests. Researchers at CCDC SC in Natick, Massachusetts simulated shrapnel impact by shooting large, BB-like projectiles at the sample. The team performed tests by sandwiching the nanofiber sheets between sheets of woven Twaron. They observed little difference in protection between a stack of all woven Twaron sheets and a combined stack of woven Twaron and spun nanofibers.

“The capabilities of the CCDC SC allow us to quantify the successes of our fibers from the perspective of protective equipment for warfighters, specifically,” said Gonzalez.

“Academic collaborations, especially those with distinguished local universities such as Harvard, provide CCDC SC the opportunity to leverage cutting-edge expertise and facilities to augment our own R&D capabilities,” said Kathleen Swana, a researcher at CCDC SC and one of the paper’s authors. “CCDC SC, in return, provides valuable scientific and soldier-centric expertise and testing capabilities to help drive the research forward.”

In testing for thermal protection, the researchers found that the nanofibers provided 20 times the heat insulation capability of commercial Twaron and Kevlar.

“While there are improvements that could be made, we have pushed the boundaries of what’s possible and started moving the field towards this kind of multifunctional material,” said Gonzalez.

“We’ve shown that you can develop highly protective textiles for people that work in harm’s way,” said Parker. “Our challenge now is to evolve the scientific advances to innovative products for my brothers and sisters in arms.”

Harvard’s Office of Technology Development has filed a patent application for the technology and is actively seeking commercialization opportunities.

Here’s a link to and a citation for the paper,

para-Aramid Fiber Sheets for Simultaneous Mechanical and Thermal Protection in Extreme Environments by Grant M. Gonzalez, Janet Ward, John Song, Kathleen Swana, Stephen A. Fossey, Jesse L. Palmer, Felita W. Zhang, Veronica M. Lucian, Luca Cera, John F. Zimmerman, F. John Burpo, Kevin Kit Parker. Matter DOI: https://doi.org/10.1016/j.matt.2020.06.001 Published:June 29, 2020

This paper is behind a paywall.

While this is the first time I’ve featured clothing/armour that’s protective against explosions I have on at least two occasions featured bulletproof clothing in a Canadian context. A November 4, 2013 posting had a story about a Toronto-based tailoring establishment, Garrison Bespoke, that was going to publicly test a bulletproof business suit. Should you be interested, it is possible to order the suit here. There’s also a February 11, 2020 posting announcing research into “Comfortable, bulletproof clothing for Canada’s Department of National Defence.”

Regulating body temperature, graphene-style

Leave a reply

I find some illustrations a little difficult to decipher,

Caption: Graphene thermal smart materials. Credit: The University of Manchester

I believe the red in the ‘on/off’ images, signifies heat from the surrounding environment and is not an indicator for body heat and the yellow square in the ‘on’ image indicates the shirt is working and repelling that heat.

Moving on, a June 18, 2020 news item on Nanowerk describes this latest work on a smart textile that can help regulate body temperature when it’s hot,

New research on the two-dimensional (2D) material graphene has allowed researchers to create smart adaptive clothing which can lower the body temperature of the wearer in hot climates.

A team of scientists from The University of Manchester’s National Graphene Institute have created a prototype garment to demonstrate dynamic thermal radiation control within a piece of clothing by utilising the remarkable thermal properties and flexibility of graphene. The development also opens the door to new applications such as, interactive infrared displays and covert infrared communication on textiles.

A June 18, 2020 University of Manchester press release (also on EurekAlert), which originated the news item, provides more detail,

The human body radiates energy in the form of electromagnetic waves in the infrared spectrum (known as blackbody radiation). In a hot climate it is desirable to make use the full extent of the infrared radiation to lower the body temperature that can be achieved by using infrared-transparent textiles. As for the opposite case, infrared-blocking covers are ideal to minimise the energy loss from the body. Emergency blankets are a common example used to deal with treating extreme cases of body temperature fluctuation.

The collaborative team of scientists demonstrated the dynamic transition between two opposite states by electrically tuning the infrared emissivity (the ability to radiate energy) of the graphene layers integrated onto textiles.

One-atom thick graphene was first isolated and explored in 2004 at The University of Manchester. Its potential uses are vast and research has already led to leaps forward in commercial products including; batteries, mobile phones, sporting goods and automotive.

The new research published today in journal Nano Letters, demonstrates that the smart optical textile technology can change its thermal visibility. The technology uses graphene layers to control of thermal radiation from textile surfaces.

Professor Coskun Kocabas, who led the research, said: “Ability to control the thermal radiation is a key necessity for several critical applications such as temperature management of the body in excessive temperature climates. Thermal blankets are a common example used for this purpose. However, maintaining these functionalities as the surroundings heats up or cools down has been an outstanding challenge.”

Prof Kocabas added: “The successful demonstration of the modulation of optical properties on different forms of textile can leverage the ubiquitous use of fibrous architectures and enable new technologies operating in the infrared and other regions of the electromagnetic spectrum for applications including textile displays, communication, adaptive space suits, and fashion”.

This study built on the same group’s previous research using graphene to create thermal camouflage which would fool infrared cameras. The new research can also be integrated into existing mass-manufacture textile materials such as cotton. To demonstrate, the team developed a prototype product within a t-shirt allowing the wearer to project coded messages invisible to the naked eye but readable by infrared cameras.

“We believe that our results are timely showing the possibility of turning the exceptional optical properties of graphene into novel enabling technologies. The demonstrated capabilities cannot be achieved with conventional materials.”

“The next step for this area of research is to address the need for dynamic thermal management of earth-orbiting satellites. Satellites in orbit experience excesses of temperature, when they face the sun, and they freeze in the earth’s shadow. Our technology could enable dynamic thermal management of satellites by controlling the thermal radiation and regulate the satellite temperature on demand.” said Kocabas.

Professor Sir Kostya Novoselov was also involved in the research: “This is a beautiful effect, intrinsically routed in the unique band structure of graphene. It is really exciting to see that such effects give rise to the high-tech applications.” he said.

Advanced materials is one of The University of Manchester’s research beacons – examples of pioneering discoveries, interdisciplinary collaboration and cross-sector partnerships that are tackling some of the biggest questions facing the planet. #ResearchBeacons

Here’s a link to and a citation for the paper,

Graphene-Enabled Adaptive Infrared Textiles by M. Said Ergoktas, Gokhan Bakan, Pietro Steiner, Cian Bartlam, Yury Malevich, Elif Ozden-Yenigun, Guanliang He, Nazmul Karim, Pietro Cataldi, Mark A. Bissett, Ian A. Kinloch, Kostya S. Novoselov, and Coskun Kocabas. Nano Lett. 2020, XXXX, XXX, XXX-XXX DOI: https://doi.org/10.1021/acs.nanolett.0c01694 Publication Date:June 18, 2020 Copyright © 2020 American Chemical Society

This paper is behind a paywall.

In the future your clothing may be a health monitor

Leave a reply

It’s not ready for the COVID-19 pandemic but if I understand it properly, wearing this clothing will be a little like wearing a thermometer and that could be very useful. A March 4, 2020 news item on Nanowerk announces the research (Note: A link has been removed),

Researchers have reported a new material, pliable enough to be woven into fabric but imbued with sensing capabilities that can serve as an early warning system for injury or illness.

The material, described in a paper published by ACS Applied Nano Materials (“Poly(octadecyl acrylate)-Grafted Multiwalled Carbon Nanotube Composites for Wearable Temperature Sensors”), involves the use of carbon nanotubes and is capable of sensing slight changes in body temperature while maintaining a pliable disordered structure – as opposed to a rigid crystalline structure – making it a good candidate for reusable or disposable wearable human body temperature sensors. Changes in body heat change the electrical resistance, alerting someone monitoring that change to the potential need for intervention.

I think this is an artistic rendering of the research,

Caption: Researchers have reported a new material, pliable enough to be woven into fabric but imbued with sensing capabilities that could serve as an early warning system for injury or illness. Credit: University of Houston

A March 4, 2020 University of Houston (Texas, US) news release (also on EurekAlert) by Jeannie Kever, which originated the news item, describes the work in more detail,

“Your body can tell you something is wrong before it becomes obvious,” said Seamus Curran, a physics professor at the University of Houston and co-author on the paper. Possible applications range from detecting dehydration in an ultra-marathoner to the beginnings of a pressure sore in a nursing home patient.

The researchers said it is also cost-effective because the raw materials required are used in relatively low concentrations.

The discovery builds on work Curran and fellow researchers Kang-Shyang Liao and Alexander J. Wang began nearly a decade ago, when they developed a hydrophobic nanocoating for cloth, which they envisioned as a protective coating for clothing, carpeting and other fiber-based materials.

Wang is now a Ph.D. student at Technological University Dublin, currently working with Curran at UH, and is corresponding author for the paper. In addition to Curran and Liao, other researchers involved include Surendra Maharjan, Brian P. McElhenny, Ram Neupane, Zhuan Zhu, Shuo Chen, Oomman K. Varghese and Jiming Bao, all of UH; Kourtney D. Wright and Andrew R. Barron of Rice University, and Eoghan P. Dillon of Analysis Instruments in Santa Barbara.

The material, created using poly(octadecyl acrylate)-grafted multiwalled carbon nanotubes, is technically known as a nanocarbon-based disordered, conductive, polymeric nanocomposite, or DCPN, a class of materials increasingly used in materials science. But most DCPN materials are poor electroconductors, making them unsuitable for use in wearable technologies that require the material to detect slight changes in temperature.

The new material was produced using a technique called RAFT-polymerization, Wang said, a critical step that allows the attached polymer to be electronically and phononically coupled with the multiwalled carbon nanotube through covalent bonding. As such, subtle structural arrangements associated with the glass transition temperature of the system are electronically amplified to produce the exceptionally large electronic responses reported in the paper, without the negatives associated with solid-liquid phase transitions. The subtle structural changes associated with glass transition processes are ordinarily too small to produce large enough electronic responses.

Here’s a link to and a citation for the paper,

Poly(octadecyl acrylate)-Grafted Multiwalled Carbon Nanotube Composites for Wearable Temperature Sensors by Alexander J. Wang, Surendra Maharjan, Kang-Shyang Liao, Brian P. McElhenny, Kourtney D. Wright, Eoghan P. Dillon, Ram Neupane, Zhuan Zhu, Shuo Chen, Andrew R. Barron, Oomman K. Varghese, Jiming Bao, Seamus A. Curran. ACS Appl. Nano Mater. 2020, XXXX, XXX, XXX-XXX DOI: https://doi.org/10.1021/acsanm.9b02396 (Online) Publication Date:January 28, 2020 Copyright © 2020 American Chemical Society

This paper is behind a paywall.

Flexible graphene-rubber sensor for wearables

Leave a reply
Courtesy: University of Waterloo

This waffled, greyish thing may not look like much but scientists are hopeful that it can be useful as a health sensor in athletic shoes and elsewhere. A March 6, 2020 news item on Nanowerk describes the work in more detail (Note: Links have been removed),

Researchers have utilized 3D printing and nanotechnology to create a durable, flexible sensor for wearable devices to monitor everything from vital signs to athletic performance (ACS Nano, “3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring”).

The new technology, developed by engineers at the University of Waterloo [Ontario, Canada], combines silicone rubber with ultra-thin layers of graphene in a material ideal for making wristbands or insoles in running shoes.

A March 6, 2020 University of Waterloo news release, which originated the news item, delves further,

When that rubber material bends or moves, electrical signals are created by the highly conductive, nanoscale graphene embedded within its engineered honeycomb structure.

“Silicone gives us the flexibility and durability required for biomonitoring applications, and the added, embedded graphene makes it an effective sensor,” said Ehsan Toyserkani, research director at the Multi-Scale Additive Manufacturing (MSAM) Lab at Waterloo. “It’s all together in a single part.”

Fabricating a silicone rubber structure with such complex internal features is only possible using state-of-the-art 3D printing – also known as additive manufacturing – equipment and processes.

The rubber-graphene material is extremely flexible and durable in addition to highly conductive.

“It can be used in the harshest environments, in extreme temperatures and humidity,” said Elham Davoodi, an engineering PhD student at Waterloo who led the project. “It could even withstand being washed with your laundry.”

The material and the 3D printing process enable custom-made devices to precisely fit the body shapes of users, while also improving comfort compared to existing wearable devices and reducing manufacturing costs due to simplicity.

Toyserkani, a professor of mechanical and mechatronics engineering, said the rubber-graphene sensor can be paired with electronic components to make wearable devices that record heart and breathing rates, register the forces exerted when athletes run, allow doctors to remotely monitor patients and numerous other potential applications.

Researchers from the University of California, Los Angeles and the University of British Columbia collaborated on the project.

Here’s a link to and a citation for the paper,

3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring by Elham Davoodi, Hossein Montazerian, Reihaneh Haghniaz, Armin Rashidi, Samad Ahadian, Amir Sheikhi, Jun Chen, Ali Khademhosseini, Abbas S. Milani, Mina Hoorfar, Ehsan Toyserkani. ACS Nano 2020, 14, 2, 1520-1532 DOI: https://doi.org/10.1021/acsnano.9b06283 Publication Date: January 6, 2020 Copyright © 2020 American Chemical Society

This paper is behind a paywall.

Winter jacket made with ‘brewed protein’ and enabled by synthetic biology

Leave a reply

It’s called a ‘Moon Parka’,

[downloaded from https://sp.spiber.jp/en/tnfsp/mp/]

Adele Peters in her October 31, 2019 article for Fast Company describes the technology used to make this jacket,

A typical waterproof winter jacket is made with nylon—a material that, like other plastics, is made from petroleum. But a new limited-edition jacket from The North Face Japan uses something called “brewed protein” instead. It’s a material inspired by spider silk that is fermented in giant vats, the same way that breweries make beer.

It’s one of the first uses of a material produced by the Japanese startup Spiber, a company that has spent more than a decade developing a new process to make high-performance textiles and other products that don’t rely on fossil fuels, animals, or natural fibers like cotton, all of which have environmental issues. …

The company designs genes that code for a specific protein—the first was an exact replica of natural spider silk, known for its extreme strength—and then introduces the genes into microorganisms that can produce the protein efficiently. Inside giant tanks, the microorganisms are fed sugar, grow and multiply, and produce the protein through fermentation. …

Spiber first started collaborating with Goldwin, a Japanese outdoor brand that owns the Japanese rights to The North Face, in 2015, and created an early prototype of a jacket then. But it quickly realized that an exact replica of spider silk wouldn’t work well for the application; the material sucks up water, and the jacket needed to be waterproof.

“We spent the last four years going back to the drawing board, redesigning our protein molecule—the very order of the amino acids in the molecule,” says Meyer [Daniel Meyer, Spiber’s head of corporate global marketing]. “And we created our own hydrophobic [water repellent] version of spider silk. It’s inspired by natural spider silk, but we have made our own design changes such that it would be more hydrophobic and meet the performance requirements of The North Face Japan.”

…

The jacket is available for purchase but only by a lottery, which has now closed. According to Peters, a large, commercial production facility is being built in Thailand so that at some point a Moon Parka will be affordable. For reference, the lottery jackets were priced at ¥150,000 (about $1,377 US).

You can find Spiber here in mid-March [2020] according to the homepage.

Comfortable, bulletproof clothing for Canada’s Department of National Defence

Leave a reply

h/t to Miriam Halpenny’s October 14, 2019 Castanet article as seen on the Vancouverisawesome website for this news about bulletproof clothing being developed for Canada’s National Department of Defence. I found a September 4, 2019 University of British Columbia Okanagan news release describing the research and the funds awarded to it,

The age-old technique of dressing in layers is a tried and tested way to protect from the elements. Now thanks to $1.5 million in new funding for UBC’s Okanagan campus, researchers are pushing the practice to new limits by creating a high-tech body armour solution with multiple layers of protection against diverse threats.

“Layers are great for regulating body heat, protecting us from inclement weather and helping us to survive in extreme conditions,” says Keith Culver, director of UBC’s Survive and Thrive Applied Research (STAR) initiative, which is supporting the network of researchers who will be working together over the next three years. “The idea is to design and integrate some of the most advanced fabrics and materials into garments that are comfortable, practical and can even stop a bullet.”

The research network working to develop these new Comfort-Optimized Materials For Operational Resilience, Thermal-transport and Survivability (COMFORTS) aims to create a futuristic new body armour solution by combining an intelligent, moisture-wicking base layer that has insulating properties with a layer of lightweight, ballistic-resistant material using cross-linker technology. It will also integrate a water, dust and gas repellent outer layer and will be equipped with comfort sensors to monitor the wearer’s response to extreme conditions.

“Although the basic idea seems simple, binding all these different materials and technologies together into a smart armour solution that is durable, reliable and comfortable is incredibly complex,” says Kevin Golovin, assistant professor of mechanical engineering at UBCO and principal investigator of the COMFORTS research network. “We’re putting into practice years of research and expertise in materials science to turn the concept into reality.”

The COMFORTS network is a collaboration between the University of British Columbia, the University of Alberta and the University of Victoria and is supported by a number of industrial partners. The network has received a $1.5M contribution agreement from the Department of National Defence through its Innovation for Defence Excellence and Security (IDEaS) program, designed to support innovation in defence and security.

“The safety and security threats faced by our military are ever-changing,” says Culver. “Hazards extend beyond security threats from foreign forces to natural disasters now occurring more frequently than ever before. Almost every year we’re seeing natural disasters, forest fires and floods that put not just ordinary Canadians at risk but also the personnel that respond directly to those threats. Our goal is to better protect those who put their lives on the line to protect the rest of us.”

While the initial COMFORTS technologies developed will be for defence and security applications, Culver says the potential extends well beyond the military.

“Imagine a garment that could keep its users comfortable and safe as they explore the tundra of the Canadian arctic, fight a raging forest fire or respond to a corrosive chemical spill,” says Culver. “I imagine everyone from first responders to soldiers to extreme athletes being impacted by this kind of innovation in protective clothing.”

The research will be ongoing with eight projects planned over the next three years. Some of the protective materials testing will take place at UBC’s STAR Impact Research Facility (SIRF), located just north of UBC’s Okanagan campus. The ballistic and blast simulation facility is the only one of its kind in Canada—it supports research and testing of ballistic and blast-resistant armour, ceramic and other composite materials, as well as helmets and other protective gear.

“I anticipate we will see some exciting new, field-tested technologies developed within the next few years,” says Culver. “I look forward to seeing where this collaboration will lead us.”

To learn more about the COMFORTS project, visit: ok.ubc.ca/okanagan-stories/textile-tech

UBC Expert Q&A

Western Canada primed to be defense and security research hotspot

World-class vineyards and sunny lakeside resorts have long been the reputation for BC’s Okanagan Valley. That reputation has expanded with Kelowna’s growth as a tech hub, according to Professor Keith Culver, director of UBC’s Survive and Thrive Research (STAR) initiative, but core expertise in defense and security research has also been rapidly expanding since UBC launched the STAR initiative five years ago.

Culver is a professor, legal theorist, self-described convener and coach with proven expertise assembling multi-disciplinary research teams working at the vanguard of innovation. One of these teams, led by Assistant Professor of Mechanical Engineering Kevin Golovin, was recently awarded a $1.5 million contract by the Department of National Defense to develop next-generation, high-performance body armour that increases the safety and comfort of Canadian soldiers.

What is UBC’s STAR initiative?

UBC STAR is a group of researchers and partners working together to solve human performance challenges. We know that solving complex problems requires a multi-disciplinary approach, so we build teams with specialized expertise from across both our campuses and other Western Canadian universities. Then we blend that expertise with the know-how and production capabilities of private and public sector partners to put solutions into practice. Above all, STAR helps university researchers and partners to work together in new, more productive ways.

You recently received considerable new funding from the Department of National Defence. Can you tell us about that research

A team of researchers from UBC, the University of Alberta and the University of Victoria have established a research network to invent and test new materials for the protection of humans operating in extreme environments – in this case, soldiers doing their jobs on foot. Assistant Professor Kevin Golovin of UBC Okanagan’s School of Engineering is leading the network with support from UBC STAR. The network brings together three leading Western Canadian universities to work together with industry to develop new technologies for the defence and security sector.

The network is developing several kinds of protective materials and hazard sensors for use in protective armour for soldiers and first responders. The name of the network captures its focus nicely: Comfort-Optimized Materials For Operational Resilience, Thermal-transport and Survivabilty (COMFORTS). Researchers in engineering, chemistry and other disciplines are developing new textile technologies and smart armour solutions that will be rigorously tested for thermal resistance to increase soldier comfort. We’re fortunate to be working with a great group of companies ready to turn our research into solutions ready for use. We’ll help to solve the challenges facing Canadian first responders and soldiers while enabling Canadian companies to sell those solutions to international markets.

What does the safety and security landscape look like in Western Canada?

I think there’s a perception out there that this kind of research is only happening in places like Halifax, Toronto or Waterloo. Western Canadian expertise is sometimes overlooked by Ottawa and Toronto, but there’s incredible expertise and cutting-edge research happening here in the west, and we are fortunate to have a strong private sector partner community that understands safety and security problems in military contexts, and in forestry, mining and wildfire and flood response. Our understanding of hazardous environments gives us a head start in putting technologies and strategies to work safely in extreme conditions, and we’re coming to realize that our creative solutions can both help Canadians and others around the world.

Why do companies want to work with UBC STAR and its Western Canadian partners?

We have great researchers and great facilities – our blast simulator and ballistics range are second to none – but we offer much more than expertise and equipment. UBC STAR is fundamentally about making the most of collaboration. We work together with our partners to understand the nature of problems and what could contribute to a solution. We readily draw on expertise from multiple universities and firms to assemble the right team. And we know that we are in the middle of a great living lab for testing solutions –with rural and urban areas of varying sizes, climates and terrains. We’re situated in an ideal place to work through technology development, while identifying the strategies and standards needed to put innovative technology to good use.

How do you expect this sector to develop over the next decade?

I see a boom coming in this sector. In Canada, and around the world, we are witnessing a rise in natural disasters that put first responders and others at risk, and our research can help improve their safety. At the same time, we are seeing a rise in global political tensions calling for Canadian military deployment in peacekeeping and other support roles. Our military needs help protecting its members so they can do their jobs in dangerous places. And, of course, when we develop protective materials for first responders and soldiers, the same solutions can be easily adapted for use in sport and health – such as protecting children playing contact sports or our aging population from slip and fall injuries. I think I speak for everyone involved in this research when I say that it’s incredibly rewarding to see how solutions found addressing one question often have far broader benefits for Canadians in every walk of life.

To learn more about STAR, visit: star.ubc.ca

About UBC’s Okanagan campus

UBC’s Okanagan campus is an innovative hub for research and learning in the heart of British Columbia’s stunning Okanagan Valley. Ranked among the top 20 public universities in the world, UBC is home to bold thinking and discoveries that make a difference. Established in 2005, the Okanagan campus combines a globally recognized UBC education with a tight-knit and entrepreneurial community that welcomes students and faculty from around the world.

To find out more, visit: ok.ubc.ca

Courtesy: UBC Okanagan

I have mentioned* bulletproof clothing here in a November 4, 2013 posting featuring a business suit that included carbon nanotubes providing protection from bullets. Here’s where you can order one.

*’mentioned’ was substituted for ‘featured’ as a grammar correction on July 6, 2020.

MXene-coated yarn for wearable electronics

Leave a reply

There’s been a lot of talk about wearable electronics, specifically e-textiles, but nothing seems to have entered the marketplace. Scaling up your lab discoveries for industrial production can be quite problematic. From an October 10, 2019 news item on ScienceDaily,

Producing functional fabrics that perform all the functions we want, while retaining the characteristics of fabric we’re accustomed to is no easy task.

Two groups of researchers at Drexel University — one, who is leading the development of industrial functional fabric production techniques, and the other, a pioneer in the study and application of one of the strongest, most electrically conductive super materials in use today — believe they have a solution.

They’ve improved a basic element of textiles: yarn. By adding technical capabilities to the fibers that give textiles their character, fit and feel, the team has shown that it can knit new functionality into fabrics without limiting their wearability.

…

An October 10, 2019 Drexel University news release (also on EurekAlert), which originated the news item, details the proposed solution (pun! as you’ll see in the video following this excerpt),

In a paper recently published in the journal Advanced Functional Materials, the researchers, led by Yury Gogotsi, PhD, Distinguished University and Bach professor in Drexel’s College of Engineering, and Genevieve Dion, an associate professor in Westphal College of Media Arts & Design and director of Drexel’s Center for Functional Fabrics, showed that they can create a highly conductive, durable yarn by coating standard cellulose-based yarns with a type of conductive two-dimensional material called MXene.

Hitting snags

“Current wearables utilize conventional batteries, which are bulky and uncomfortable, and can impose design limitations to the final product,” they write. “Therefore, the development of flexible, electrochemically and electromechanically active yarns, which can be engineered and knitted into full fabrics provide new and practical insights for the scalable production of textile-based devices.”

The team reported that its conductive yarn packs more conductive material into the fibers and can be knitted by a standard industrial knitting machine to produce a textile with top-notch electrical performance capabilities. This combination of ability and durability stands apart from the rest of the functional fabric field today.

Most attempts to turn textiles into wearable technology use stiff metallic fibers that alter the texture and physical behavior of the fabric. Other attempts to make conductive textiles using silver nanoparticles and graphene and other carbon materials raise environmental concerns and come up short on performance requirements. And the coating methods that are successfully able to apply enough material to a textile substrate to make it highly conductive also tend to make the yarns and fabrics too brittle to withstand normal wear and tear.

“Some of the biggest challenges in our field are developing innovative functional yarns at scale that are robust enough to be integrated into the textile manufacturing process and withstand washing,” Dion said. “We believe that demonstrating the manufacturability of any new conductive yarn during experimental stages is crucial. High electrical conductivity and electrochemical performance are important, but so are conductive yarns that can be produced by a simple and scalable process with suitable mechanical properties for textile integration. All must be taken into consideration for the successful development of the next-generation devices that can be worn like everyday garments.”

The winning combination

Dion has been a pioneer in the field of wearable technology, by drawing on her background on fashion and industrial design to produce new processes for creating fabrics with new technological capabilities. Her work has been recognized by the Department of Defense, which included Drexel, and Dion, in its Advanced Functional Fabrics of America effort to make the country a leader in the field.

She teamed with Gogotsi, who is a leading researcher in the area of two-dimensional conductive materials, to approach the challenge of making a conductive yarn that would hold up to knitting, wearing and washing.

Gogotsi’s group was part of the Drexel team that discovered highly conductive two-dimensional materials, called MXenes, in 2011 and have been exploring their exceptional properties and applications for them ever since. His group has shown that it can synthesize MXenes that mix with water to create inks and spray coatings without any additives or surfactants – a revelation that made them a natural candidate for making conductive yarn that could be used in functional fabrics. [Gogotsi’s work was featured here in a May 6, 2019 posting]

“Researchers have explored adding graphene and carbon nanotube coatings to yarn, our group has also looked at a number of carbon coatings in the past,” Gogotsi said. “But achieving the level of conductivity that we demonstrate with MXenes has not been possible until now. It is approaching the conductivity of silver nanowire-coated yarns, but the use of silver in the textile industry is severely limited due to its dissolution and harmful effect on the environment. Moreover, MXenes could be used to add electrical energy storage capability, sensing, electromagnetic interference shielding and many other useful properties to textiles.”

In its basic form, titanium carbide MXene looks like a black powder. But it is actually composed of flakes that are just a few atoms thick, which can be produced at various sizes. Larger flakes mean more surface area and greater conductivity, so the team found that it was possible to boost the performance of the yarn by infiltrating the individual fibers with smaller flakes and then coating the yarn itself with a layer of larger-flake MXene.

Putting it to the test

The team created the conductive yarns from three common, cellulose-based yarns: cotton, bamboo and linen. They applied the MXene material via dip-coating, which is a standard dyeing method, before testing them by knitting full fabrics on an industrial knitting machine – the kind used to make most of the sweaters and scarves you’ll see this fall.

Each type of yarn was knit into three different fabric swatches using three different stitch patterns – single jersey, half gauge and interlock – to ensure that they are durable enough to hold up in any textile from a tightly knit sweater to a loose-knit scarf.

“The ability to knit MXene-coated cellulose-based yarns with different stitch patterns allowed us to control the fabric properties, such as porosity and thickness for various applications,” the researchers write.

To put the new threads to the test in a technological application, the team knitted some touch-sensitive textiles – the sort that are being explored by Levi’s and Yves Saint Laurent as part of Google’s Project Jacquard.

Not only did the MXene-based conductive yarns hold up against the wear and tear of the industrial knitting machines, but the fabrics produced survived a battery of tests to prove its durability. Tugging, twisting, bending and – most importantly – washing, did not diminish the touch-sensing abilities of the yarn, the team reported – even after dozens of trips through the spin cycle.

Pushing forward

But the researchers suggest that the ultimate advantage of using MXene-coated conductive yarns to produce these special textiles is that all of the functionality can be seamlessly integrated into the textiles. So instead of having to add an external battery to power the wearable device, or wirelessly connect it to your smartphone, these energy storage devices and antennas would be made of fabric as well – an integration that, though literally seamed, is a much smoother way to incorporate the technology.

“Electrically conducting yarns are quintessential for wearable applications because they can be engineered to perform specific functions in a wide array of technologies,” they write.

Using conductive yarns also means that a wider variety of technological customization and innovations are possible via the knitting process. For example, “the performance of the knitted pressure sensor can be further improved in the future by changing the yarn type, stitch pattern, active material loading and the dielectric layer to result in higher capacitance changes,” according to the authors.

Dion’s team at the Center for Functional Fabrics is already putting this development to the test in a number of projects, including a collaboration with textile manufacturer Apex Mills – one of the leading producers of material for car seats and interiors. And Gogotsi suggests the next step for this work will be tuning the coating process to add just the right amount of conductive MXene material to the yarn for specific uses.

“With this MXene yarn, so many applications are possible,” Gogotsi said. “You can think about making car seats with it so the car knows the size and weight of the passenger to optimize safety settings; textile pressure sensors could be in sports apparel to monitor performance, or woven into carpets to help connected houses discern how many people are home – your imagination is the limit.”

Researchers have produced a video about their work,

Here’s a link to and a citation for the paper,

Knittable and Washable Multifunctional MXene‐Coated Cellulose Yarns by Simge Uzun, Shayan Seyedin, Amy L. Stoltzfus, Ariana S. Levitt, Mohamed Alhabeb, Mark Anayee, Christina J. Strobel, Joselito M. Razal, Genevieve Dion, Yury Gogotsi. Advanced Functional Materials DOI: https://doi.org/10.1002/adfm.201905015 First published: 05 September 2019

This paper is behind a paywall.