Tag Archives: air pollution

Metallic nanoparticles inside heart tissue mitochondria can cause damage

Leave a reply

With all the focus on COVID-19, viruses , and aerosols, it’s easy to forget that there are other kinds of contaminated air too. The last time I featured work on nanoparticles and air pollution was in a May 31, 2017 posting, “Explaining the link between air pollution and heart disease?” where scientists announced they may have discovered how air pollution (nanoparticles) were making their way from lungs to the heart. Answer: the bloodstream.

A July 3, 2020 Lancaster University press release (also on EurekAlert) announces research into how air made toxic by metallic nanoparticles affects the heart in very specific ways (Note: A link has been removed),

Toxic metallic air pollution nanoparticles are getting inside the crucial, energy-producing structures within the hearts of people living in polluted cities, causing cardiac stress – a new study confirms.

The research team, led by Professors Barbara Maher of Lancaster University and Lilian Calderón-Garcidueñas of The University of Montana and the Universidad del Valle de Mexico, found the metallic nanoparticles, which included iron-rich nanoparticles and other pollution-derived metals such as titanium, inside the damaged heart cells of a 26-year-old and even a three-year-old toddler.

The hearts had belonged to people who had died in accidents and who had lived in highly-polluted Mexico City.

The findings shed new light on how air pollution can cause the development of heart disease, as the iron-rich particles were associated with damage to the cells, and increased cardiac oxidative stress, even in these very young hearts.

The repeated inhalation of these iron-rich nanoparticles, and their circulation by the bloodstream to the heart, may account for the well-established associations between exposure to particulate air pollution and increased cardiovascular disease, including heart attacks. The study indicates that heart disease can start in very early age, before progressing to full-blown cardiovascular illness later in life. This type of air pollution may thus be responsible for the ‘silent epidemic’ of heart disease, internationally. By causing pre-existing heart conditions, it may also account for some of the increased death rates from Covid-19 seen in areas with high levels of particulate air pollution.

Professor Maher said: “It’s been known for a long time that people with high exposure to particulate air pollution experience increased levels and severity of heart disease. Our new work shows that iron-rich nanoparticles from air pollution can get right inside the millions of mitochondria inside our hearts…the structures which generate the energy needed for our hearts to pump properly.

“That we found these metal particles inside the heart of even a three-year old indicates that we’re setting heart disease in train right from the earliest days, but only seeing its full, clinical effects in later life. It’s really urgent to reduce emissions of ultrafine particles from our vehicles and from industry, before we give heart disease to the next generation too.”

The researchers, using high-resolution transmission electron microscopy and energy-dispersive X-ray analysis, found that the mitochondria containing the iron-rich nanoparticles appeared to be damaged, with some cells showing deformities and others with ruptured membranes. Professor Calderón-Garcidueñas stated that increased levels of markers of cardiac oxidative stress are present in the very young cases examined.

The iron-rich nanoparticles found inside the heart cells are identical in size, shape and composition to those emitted from sources such as the exhausts, tyres and brakes of vehicles. These air pollution nanoparticles are also emitted by industrial sources as well as open fires in homes.

Some of the iron-rich nanoparticles are also strongly magnetic. This raises concerns about what might happen when people with millions of these nanoparticles in their hearts are using appliances with associated magnetic fields, such as hair dryers and mobile phones. People who work in industries that mean they are exposed to magnetic fields such as welders and power line engineers may also be at risk. This kind of exposure could potentially lead to heart electrical dysfunction and cell damage.

The findings builds on the researchers’ previous findings that show that the hearts of city dwellers contain billions of these nanoparticles and can be up to ten times more polluted than the hearts of people living in less polluted places.

The researchers say their study underlines the need for governments across the world to tackle ultrafine particulate pollution in their cities.

Professor Calderón-Garcidueñas said: “Exposure to such air pollution is a modifiable risk factor for cardiovascular disease, on a global scale, reinforcing the urgent need for individual and government actions not just to reduce PM2.5 but to monitor, regulate and reduce emissions of these specific, ultrafine components of the urban air pollution ‘cocktail’.”

Here’s a link to and a citation for the paper,

Iron-rich air pollution nanoparticles: An unrecognised environmental risk factor for myocardial mitochondrial dysfunction and cardiac oxidative stress by B.A.Maher, A.González-Maciel, R.Reynoso-Robles, R.Torres-Jardón, L.Calderón-Garcidueñas. Environmental Research Volume 188, September 2020, 109816 DOI: https://doi.org/10.1016/j.envres.2020.109816 Available online 21 June 2020

This paper appears to be open access (just keep scrolling down).

Burning coal produces harmful titanium dioxide nanoparticles

Leave a reply

It turns out that Canada has the fifth largest reserve of coal in the world, according to the Coal in Canada Wikipedia entry (Note: Links have been removed),

Coal reserves in Canada rank fifth largest in the world (following the former Soviet Union, the United States, the People’s Republic of China and Australia) at approximately 10 billion tons, 10% of the world total.[1] This represents more energy than all of the oil and gas in the country combined. The coal industry generates CDN$5 billion annually.[2] Most of Canada’s coal mining occurs in the West of the country.[3] British Columbia operates 10 coal mines, Alberta 9, Saskatchewan 3 and New Brunswick one. Nova Scotia operates several small-scale mines, Westray having closed following the 1992 disaster there.[4]

So, this news from Virginia holds more than the usual interest for me (I’m in British Columbia). From an Aug. 8, 2017 Virginia Tech news release (also on EurekAlert),

Environmental scientists led by the Virginia Tech College of Science have discovered that the burning of coal produces incredibly small particles of a highly unusual form of titanium oxide.

When inhaled, these nanoparticles can enter the lungs and potentially the bloodstream.

The particulates — known as titanium suboxide nanoparticles — are unintentionally produced as coal is burned, creating these tiniest of particles, as small as 100 millionths of a meter [emphasis mine], said the Virginia Tech-led team. When the particles are introduced into the air — unless captured by high-tech particle traps — they can float away from power plant stacks and travel on air currents locally, regionally, and even globally.

As an example of this, these nanoparticles were found on city streets, sidewalks, and in standing water in Shanghai, China.

The findings are published in the latest issue of Nature Communications under team leader Michael F. Hochella Jr., University Distinguished Professor of Geosciences with the College of Science, and Yi Yang, a professor at East China Normal University in Shanghai. Other study participants include Duke University, the University of Kentucky, and Laurentian University in Canada.

“The problem with these nanoparticles is that there is no easy or practical way to prevent their formation during coal burning,” Hochella said, adding that in nations with strong environmental regulations, such as the United States, most of the nanoparticles would be caught by particle traps. Not so in Africa [a continent not a nation], China, or India, where regulations are lax or nonexistent, with coal ash and smoke entering the open air.

“Due to advanced technology used at U.S.-based coal burning power plants, mandated by the Clean Air Act and the Environmental Protection Agency, most of these nanoparticles and other tiny particles are removed before the final emission of the plant’s exhaust gases,” Hochella said. “But in countries where the particles from the coal burning are not nearly so efficiently removed, or removed at all, these titanium suboxide nanoparticles and many other particle types are emitted into the atmosphere, in part resulting in hazy skies that plague many countries, especially in China and India.”

Hochella and his team found these previously unknown nanoparticles not only in coal ash from around the world and in the gaseous waste emissions of coal plants, but on city streets, in soils and storm water ponds, and at wastewater treatment plants.

“I could not believe what I have found at the beginning, because they had been reported so extremely rarely in the natural environment,” said Yang, who once worked as a visiting professor in Virginia Tech’s Department of Geosciences with Hochella. “It took me several months to confirm their occurrence in coal ash samples.”

The newly found titanium suboxide — called Magnéli phases — was once thought rare, found only sparingly on Earth in some meteorites, from a small area of rock formations in western Greenland, and occasionally in moon rocks. The findings by Hochella and his team indicate that these nanoparticles are in fact widespread globally. They are only now being studied for the first time in natural environments using powerful electron microscopes.

Why did the discovery occur now? According to the report, nearly all coal contains traces of the minerals rutile and/or anatase, both “normal,” naturally occurring, and relatively inert titanium oxides, especially in the absence of light. When those minerals are burned in the presence of coal, research found they easily and quickly converted to these unusual titanium suboxide nanoparticles. The nanoparticles then become entrained in the gases that leave the power plant.

When inhaled, the nanoparticles enter deep into the lungs, potentially all the way into the air sacs that move oxygen into our bloodstream during the normal breathing process. While human lung toxicity of these particles is not yet known, a preliminary biotoxicity test by Hochella and Richard Di Giulio, professor of environmental toxicology, and Jessica Brandt, a doctoral candidate, both at Duke University, indicates that the particles do indeed have toxicity potential.

According to the team, further study is clearly needed, especially biotoxicity testing directly relevant to the human lung. Partnering with coal-power plants either in the United States or China would be ideal, said Yang.

More troubling, the study shows that titanium suboxide nanoparticles are biologically active in the dark, making the particles highly suspect. Exact human health effects are yet unknown.

“Future studies will need to very carefully investigate and access the toxicity of titanium suboxide nanoparticles in the human lung, and this could take years, a sobering thought considering its potential danger,” Hochella said.

As the titanium suboxide nanoparticle itself is produced incidentally, Hochella and his team came across the nanoparticle by accident while studying a 2014 coal ash spill in the Dan River, North Carolina. During the study of the downstream movement of toxic metals in the ash in the Dan River, the team discovered and recognized the presence of small amounts of the highly unusual titanium suboxide.

The group later produced the titanium suboxide nanoparticles when burning coal in a lab simulation.

This new potential air pollution health hazard builds on already established findings from the World Health Organization. It estimates that 3.3 million premature deaths occur worldwide per year due to polluted air, Hochella said. In China, 1.6 million premature deaths are estimated annually due to cardiovascular and respiratory injury from air pollution. Most Chinese megacities top 100 severely hazy days each year with particle concentrations two to four times higher than WHO guidelines, Yang said.

Direct health effects on humans is only one factor. Findings of thousands of scientists have determined that the biggest driver of warming of the planet and the resulting climate change is industrial-scale coal burning. The impact of titanium suboxide nanoparticles found in the atmosphere, in addition to greenhouse gases, on animals, water, and plants is not yet known.

They’ve used an unusual unit of measurement, “100 millionths of a meter,” nanoparticles are usually described in nanometers.

Here’s a link to and a citation for the paper,

Discovery and ramifications of incidental Magnéli phase generation and release from industrial coal-burning by Yi Yang, Bo Chen, James Hower, Michael Schindler, Christopher Winkler, Jessica Brandt, Richard Di Giulio, Jianping Ge, Min Liu, Yuhao Fu, Lijun Zhang, Yuru Chen, Shashank Priya, & Michael F. Hochella Jr. Nature Communications 8, Article number: 194 (2017) doi:10.1038/s41467-017-00276-2 Published online: 08 August 2017

This paper is behind a paywall.

This put me in mind of the famous London smog, which one doesn’t hear about much anymore. For anyone not familiar with that phenomenon, here’s more from the Great Smog of London Wikipedia entry (Note: Links have been removed),

The Great Smog of London, or Great Smog of 1952 sometimes called the Big Smoke,[1] was a severe air-pollution event [emphasis mine] that affected the British capital of London in December 1952. A period of cold weather, combined with an anticyclone and windless conditions, collected airborne pollutants – mostly arising from the use of coal [emphasis mine]– to form a thick layer of smog over the city. It lasted from Friday, 5 December to Tuesday, 9 December 1952 and then dispersed quickly when the weather changed.

It caused major disruption by reducing visibility and even penetrating indoor areas, far more severe than previous smog events experienced in the past, called “pea-soupers”. Government medical reports in the following weeks, however, estimated that up until 8 December, 4,000 people had died as a direct result of the smog and 100,000 more were made ill by the smog’s effects on the human respiratory tract. More recent research suggests that the total number of fatalities was considerably greater, about 12,000.[2]

London had suffered since the 1200s from poor air quality,[3] which worsened in the 1600s,[4][5] but the Great Smog is known to be the worst air-pollution event in the history of the United Kingdom,[6] and the most significant in terms of its effect on environmental research, government regulation, and public awareness of the relationship between air quality and health.[2][4] It led to several changes in practices and regulations, including the Clean Air Act 1956. …

DISCmini: world’s smallest handheld nanoparticle counter

Leave a reply

DISCmini: a handheld diffusion size classifier for nanoparticle measurement Courtesy: Testo

They’/re claiming this is the world’s smallest in a July 12, 2017 news item on Nanowerk,

Testo, Inc., the world’s leading manufacturer of test and measurement instruments, announces the DiSCmini, the smallest handheld instrument for the measurement of nanoparticle. DiSCmini measures: particle number, average particle diameter and lung-deposited surface area (LDSA) with time resolution and logging at 1 second (1 Hz).

…

Testo’s DISCmini product page offers a video and more details,

Negative health effects due to nanoparticles appear to correlate particularly well with number concentration or surface. Epidemiological and toxicological studies are still mainly based on total mass, or they use fuzzy proxies like “distance from a busy road” to describe personal exposure, although the health-related effects of particle number concentration are well known. We believe that this contradictory situation is due to the lack of adequate sensors on the market.

This gap is now closed with Testo Particle´s handheld version of the “Diffusion Size Classifier”, testo DiSCmini.  The testo DiSCmini is a portable sensor for the measurement of particle number and average diameter with a time resolution of up to 1 second (1 Hz). The simultaneous capture of number concentration and particle size allows the specification of other characteristic parameters, such as the particles surface (Lung Deposited Surface Area, LDSA). The instrument is battery powered with a lifetime of up to 8 hours; data can be recorded on a memory card, and transferred to a external computer via USB cable.

The testo DiSCmini is particularly efficient for personal exposure monitoring in particle-loaded work space with toxic air contaminants such as diesel soot, welding fumes, or industrial nanomaterials.

The testo DiSCmini is based on the electrical charging of the aerosols. Positive air ions generated in a corona discharge are mixed with the aerosol. The charged particles are then detected in two stages by electrometers. The first detector stage is a pile of steel grids; small particles will preferably deposit on it by diffusion. The second stage is a high-efficiency particle filter which captures all the other particles. The mean particle size can be obtained by analysis of the two currents measured on the stages. The particle count is determined with the total current. The testo DiSCmini detects particles ranging in size from 10 to about 700 nm, while the modal value should lie below 300 nm. The concentration range is from about 1’000 to over 1’000’000 particles per cubic centimetre. The accuracy of the measurement depends on the shape of the particle size distribution and number concentration, and is usually around 15-20% compared to a reference CPC. The unit should be serviced and calibrated once a year.

Unlike other instruments the testo DiSCmini needs neither working liquid of any kind nor radioactive sources. Therefore, it can be operated in any position and over extended periods without requiring a liquid refill. Typical applications include the determination of personal exposure in particle-loaded jobs (diesel soot, welding fumes, industrial nanomaterials) or in vulnerable groups (asthmatics, COPD patients). The development of large area survey grids of ambient air is becoming possible. The small size of  the testo DiSCmini makes the instrument particularly suitable for personal carry-on measurement campaigns. The high measurement frequency of 1 Hz allows the instrument to monitor rapid changes in the aerosol. This feature is particularly interesting to local or defined sources of particle generation. The equipment is designed for situations and applications where quick and easy access to particle number concentration and average diameter is desired.

For anyone interested in the technical specifications, there’s the DISCmini product brochure.

Generating power from polluted air

Leave a reply

I have no idea how viable this concept might be but it is certainly appealing, From a May 8, 2017 news item on Nanowerk (Note: A link has been removed),

Researchers from the University of Antwerp and KU Leuven (University of Leuven), Belgium, have succeeded in developing a process that purifies air and, at the same time, generates power. The device must only be exposed to light in order to function (ChemSusChem, “Harvesting Hydrogen Gas from Air Pollutants with an Unbiased Gas Phase Photoelectrochemical Cell”).

Caption: The new device must only be exposed to light in order to purify air and generate power. Credit: UAntwerpen and KU Leuven

A May 8, 2017 University of Leuven press release (also on EurekAlert), which originated the news item, describes this nifty research in slightly more detail,

“We use a small device with two rooms separated by a membrane,” explains Professor Sammy Verbruggen (UAntwerp/KU Leuven). “Air is purified on one side, while on the other side hydrogen gas is produced from a part of the degradation products. This hydrogen gas can be stored and used later as fuel, as is already being done in some hydrogen buses, for example.”

In this way, the researchers respond to two major social needs: clean air and alternative energy production. The heart of the solution lies at the membrane level, where the researchers use specific nanomaterials. “These catalysts are capable of producing hydrogen gas and breaking down air pollution,” explains Professor Verbruggen. “In the past, these cells were mostly used to extract hydrogen from water. We have now discovered that this is also possible, and even more efficient, with polluted air.”

It seems to be a complex process, but it is not: the device must only be exposed to light. The researchers’ goal is to be able to use sunlight, as the processes underlying the technology are similar to those found in solar panels. The difference here is that electricity is not generated directly, but rather that air is purified while the generated power is stored as hydrogen gas.

“We are currently working on a scale of only a few square centimetres. At a later stage, we would like to scale up our technology to make the process industrially applicable. We are also working on improving our materials so we can use sunlight more efficiently to trigger the reactions. “

Here’s a link to and a citation for the paper,

Harvesting Hydrogen Gas from Air Pollutants with an Unbiased Gas Phase Photoelectrochemical Cell. by  Prof. Dr. Sammy W. Verbruggen, Myrthe Van Hal1, Tom Bosserez, Dr. Jan Rongé, Dr. Birger Hauchecorne, Prof. Dr. Johan A. Martens, and Prof. Dr. Silvia Lenaerts. ChemSusChem Volume 10, Issue 7, pages 1413–1418, April 10, 2017 DOI: 10.1002/cssc.201601806 Version of Record online: 6 MAR 2017

© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

This paper is behind a paywall.

Explaining the link between air pollution and heart disease?

Leave a reply

An April 26, 2017 news item on Nanowerk announces research that may explain the link between heart disease and air pollution (Note: A link has been removed),

Tiny particles in air pollution have been associated with cardiovascular disease, which can lead to premature death. But how particles inhaled into the lungs can affect blood vessels and the heart has remained a mystery.

Now, scientists have found evidence in human and animal studies that inhaled nanoparticles can travel from the lungs into the bloodstream, potentially explaining the link between air pollution and cardiovascular disease. Their results appear in the journal ACS Nano (“Inhaled Nanoparticles Accumulate at Sites of Vascular Disease”).

An April 26, 2017 American Chemical Society news release on EurekAlert, which originated the news item,  expands on the theme,

The World Health Organization estimates that in 2012, about 72 percent of premature deaths related to outdoor air pollution were due to ischemic heart disease and strokes. Pulmonary disease, respiratory infections and lung cancer were linked to the other 28 percent. Many scientists have suspected that fine particles travel from the lungs into the bloodstream, but evidence supporting this assumption in humans has been challenging to collect. So Mark Miller and colleagues at the University of Edinburgh in the United Kingdom and the National Institute for Public Health and the Environment in the Netherlands used a selection of specialized techniques to track the fate of inhaled gold nanoparticles.

In the new study, 14 healthy volunteers, 12 surgical patients and several mouse models inhaled gold nanoparticles, which have been safely used in medical imaging and drug delivery. Soon after exposure, the nanoparticles were detected in blood and urine. Importantly, the nanoparticles appeared to preferentially accumulate at inflamed vascular sites, including carotid plaques in patients at risk of a stroke. The findings suggest that nanoparticles can travel from the lungs into the bloodstream and reach susceptible areas of the cardiovascular system where they could possibly increase the likelihood of a heart attack or stroke, the researchers say.

Here’s a link to and a citation for the paper,

Inhaled Nanoparticles Accumulate at Sites of Vascular Disease by Mark R. Miller, Jennifer B. Raftis, Jeremy P. Langrish, Steven G. McLean, Pawitrabhorn Samutrtai, Shea P. Connell, Simon Wilson, Alex T. Vesey, Paul H. B. Fokkens, A. John F. Boere, Petra Krystek, Colin J. Campbell, Patrick W. F. Hadoke, Ken Donaldson, Flemming R. Cassee, David E. Newby, Rodger Duffin, and Nicholas L. Mills. ACS Nano, Article ASAP DOI: 10.1021/acsnano.6b08551 Publication Date (Web): April 26, 2017

Copyright © 2017 American Chemical Society

This paper is behind a paywall.

Textiles that clean pollution from air and water

Leave a reply

I once read that you could tell what colour would be in style by looking at the river in Milan (Italy). It may or may not still be true in Milan but it seems that the practice of using the river for dumping the fashion industry’s wastewater is still current in at least some parts of the world according to a Nov. 10, 2016 news item on Nanowerk featuring Juan Hinestroza’s work on textiles that clear pollution,

A stark and troubling reality helped spur Juan Hinestroza to what he hopes is an important discovery and a step toward cleaner manufacturing.

Hinestroza, associate professor of fiber science and director of undergraduate studies in the College of Human Ecology [Cornell University], has been to several manufacturing facilities around the globe, and he says that there are some areas of the planet in which he could identify what color is in fashion in New York or Paris by simply looking at the color of a nearby river.

“I saw it with my own eyes; it’s very sad,” he said.

Some of these overseas facilities are dumping waste products from textile dying and other processes directly into the air and waterways, making no attempt to mitigate their product’s effect on the environment.

“There are companies that make a great effort to make things in a clean and responsible manner,” he said, “but there are others that don’t.”

Hinestroza is hopeful that a technique developed at Cornell in conjunction with former Cornell chemistry professor Will Dichtel will help industry clean up its act. The group has shown the ability to infuse cotton with a beta-cyclodextrin (BCD) polymer, which acts as a filtration device that works in both water and air.

A Nov. 10, 2016 Cornell University news release by Tom Fleischman provides more detail about the research,

Cotton fabric was functionalized by making it a participant in the polymerization process. The addition of the fiber to the reaction resulted in a unique polymer grafted to the cotton surface.

“One of the limitations of some super-absorbents is that you need to be able to put them into a substrate that can be easily manufactured,” Hinestroza said. “Fibers are perfect for that – fibers are everywhere.”

Scanning electron microscopy showed that the cotton fibers appeared unchanged after the polymerization reaction. And when tested for uptake of pollutants in water (bisphenol A) and air (styrene), the polymerized fibers showed orders of magnitude greater uptakes than that of untreated cotton fabric or commercial absorbents.

Hinestroza pointed to several positives that should make this functionalized fabric technology attractive to industry.

“We’re compatible with existing textile machinery – you wouldn’t have to do a lot of retooling,” he said. “It works on both air and water, and we proved that we can remove the compounds and reuse the fiber over and over again.”

Hinestroza said the adsorption potential of this patent-pending technique could extend to other materials, and be used for respirator masks and filtration media, explosive detection and even food packaging that would detect when the product has gone bad.

And, of course, he hopes it can play a role in a cleaner, more environmentally responsible industrial practices.

“There’s a lot of pollution generation in the manufacture of textiles,” he said. “It’s just fair that we should maybe use the same textiles to clean the mess that we make.”

Here’s a link to and a citation for the paper,

Cotton Fabric Functionalized with a β-Cyclodextrin Polymer Captures Organic Pollutants from Contaminated Air and Water by Diego M. Alzate-Sánchez†, Brian J. Smith, Alaaeddin Alsbaiee, Juan P. Hinestroza, and William R. Dichtel. Chem. Mater., Article ASAP DOI: 10.1021/acs.chemmater.6b03624 Publication Date (Web): October 24, 2016

Copyright © 2016 American Chemical Society

This paper is open access.

One comment, I’m not sure how this solution will benefit the rivers unless they’re thinking that textile manufacturers will filter their waste water through this new fabric.

There is another researcher working on creating textiles that remove air pollution, Tony Ryan at the University of Sheffield (UK). My latest piece about his (and Helen Storey’s) work is a July 28, 2014 posting featuring a detergent that deposits onto the fabric nanoparticles that will clear air pollution. At the time, China was showing serious interest in the product.

Laundry detergents that clean clothes and pollution from the air

Leave a reply

Tony Ryan, as an individual (and with Helen Storey), knows how to provoke interest in a topic many of us find tired, air pollution. This time, Ryan and Storey have developed a laundry detergent additive through their Catalytic Clothing venture (mentioned previously in a Feb. 24, 2012 posting and in a July 8, 2011 posting). From Adele Peters’ July 22, 2014 article for Fast Company (Note: A link has been removed),

Here’s another reason cities need more pedestrians: If someone is wearing clothes that happened to be washed in the right detergent, just their walking down the street can suck smog out of the surrounding air.

For the last few years, researchers at the Catalytic Clothing project have been testing a pollution-fighting laundry detergent that coats clothing in nano-sized particles of titanium dioxide. The additive traps smog and converts it into a harmless byproduct. It’s the same principle that has been used smog-eating buildings and roads, but clothing has the advantage of actually taking up more space.

Kasey Lum in a June 25, 2014 article for Ecouterre describes the product as a “laundry additive [which] could turn clothing in mobile air purifiers,”

CatClo piggybacks the regular laundering process to deposit nanoparticles of titanium dioxide onto the fibers of the clothing. Exposure to light excites electrons on the particles’ surface, creating free radicals that react with water to make hydrogen peroxide. This, in turn, “bleaches out” volatile organic compounds and nitrogen oxides in the atmosphere, according to Storey, rendering them harmless.

Lum referenced a May 23, 2014 article written by Helen Storey and Tony Ryan for the UK’s Guardian, newspaper which gives a history of their venture, Catalytic Clothing, and an update on their laundry additive (Note: Links have been removed),

It was through a weird and wonderful coincidence on BBC [British Broadcasting Corporation] Radio 4 that we met to discuss quantum mechanics and plastic packaging, resulting in the Wonderland Project, where we created disappearing gowns and bottles as a metaphor for a planet that is going the same way.

Spurred by this collaborative way of working, Wonderland led to Catalytic Clothing, a liquid laundry additive. The idea came out of conversations about how we could harness the surface of our clothing and the power of fashion to communicate complex scientific ideas – and so began the campaign for clean air.

(When I first wrote about Catalytic Clothing I was under the impression that it was an art/science venture focused on clothing as a means of cleaning the air. I was unaware they were working on a laundry additive.)

Getting back to Storey’s and Ryan’s article (Note: A link has been removed),

Catalytic Clothing (CatClo) uses existing technology in a radical new way. Photocatalytic surface treatments that break down airborne pollutants are widely applied to urban spaces, in concrete, on buildings and self-cleaning glass. The efficacy is greatly increased when applied to clothing – not only is there a large surface area, but there is also a temperature gradient creating a constant flux of air, and movement through walking creates our own micro-wind, so catalysing ourselves makes us the most effective air purifiers of them all.

CatClo contains nanoparticles of titania (TiO2) a thousand times finer than a human hair. [generally nanoscale is described as between 1/60,000 to 1/100,000 of a hair’s width] When clothes are laundered through the washing process, particles are deposited onto the fibres of the fabric. When the catalysed clothes are worn, light shines on the titanium particles and it excites the electrons on the particle surface. These electrons cause oxygen molecules to split creating free-radicals that then react with water to make hydrogen peroxide. This then bleaches out the volatile organic compounds and nitrogen oxides (NOx) that are polluting the atmosphere.

The whole process is sped up when people, wearing the clothes, are walking down the street. The collective power of everyone wearing clothes treated with CatClo is extraordinary. If the whole population of a city such as Sheffield was to launder their clothes at home with a product containing CatClo technology they would have the power to remove three tonnes per day of harmful NOx pollution.

So, if the technology exists to clear the air, why isn’t it available? From Storey’s and Ryan’s article,

Altruism, is a hard concept to sell to big business. We have approached and worked with some of the world’s largest producers of laundry products but even though the technology exists and could be relatively cheap to add to existing products, it’s proved to be a tough sell. The fact that by catalysing your clothes the clean air you create will be breathed in by the person behind you is not seen as marketable.

A more serious issue is that photocatalysts can’t tell the difference between a bad pollutant and a “good” one; for example, it treats perfume as just another volatile organic compound like pollution. This is an untenable threat to an entire industry and existing products owned by those best able to take CatClo to market.

We’ve recently travelled to China to see whether CatClo could work there. China is a place where perfume isn’t culturally valued, but the common good is, so a country with one of the biggest pollution problems on the planet, and a government that isn’t hidebound by business as usual, might be the best place to start.

In the midst of developing their laundry additive, Storey and Ryan produced a pop-up exhibition, A Field of Jeans (first mentioned here in an Oct. 13, 2011 posting which lists events for the 2011 London Science Festival), to raise public awareness and support (from the article),

During the research period, we realised that there were more jeans on the planet than people. Knowing this, we launched a pop-up exhibition, A Field of Jeans. The jeans we catalysed are all recycled and as it turns out, because of the special nature of cotton denim, are the most efficacious fabric of all to support the catalysts.

The public have been overwhelmingly supportive; once fears about the “chemicals”, “nanotech” or becoming dirt magnets were dispelled, we captured people’s imagination and proved that CatClo could eventually be as normal as fluoride in toothpaste with enormous potential to increase wellbeing and clean up our polluted cities.

The pop-up exhibition is now at Thomas Tallis School in London (from the Catalytic Clothing homepage),

New 2013/2014
Field of Jeans is at Thomas Tallis school from December 2nd 2013 until further notice. Jeans can be viewed from Kidbrooke Park Road, London SE3 outside the main school entrance. This will inspire a piece of work across the school called Catalytic Learning. More will be posted here soon.
Click here for images
http://www.thomastallis.co.uk/

Here’s an image from the Field of Jeans,

Image can be found here at: https://www.flickr.com/photos/helenstoreyfoundation/sets/72157638346745735/

Image can be found here at: https://www.flickr.com/photos/helenstoreyfoundation/sets/72157638346745735/

I last featured Tony Ryan’s work here in a May 15, 2014 posting about a poem and a catalytic billboard at the University of Sheffield where Ryan is the Pro-Vice-Chancellor for Science.

Nanotechnology-enabled Catalytic Clothes look good and clean the air

1 Reply

There’s a great video on the RIA Novosti website featuring interviews about an art/science collaboration between Professor Helen Storey at the London College of Fashion and Professor Tony Ryan, a scientist at the University of Sheffield. The two have created clothing that cleans the air of pollution. From the University of Sheffield June 15, 2011 news release,

Catalytic Clothing is a radical partnership between the University of Sheffield and London College of Fashion University of the Arts London that brings together the worlds of fashion and chemistry with the potential to clean the air we breathe. Employing existing technology in a new way, it seeks to explore how clothing and textiles can be used as a catalytic surface to purify air. It is the brainchild of artist/designer Professor Helen Storey MBE and chemist Professor Tony Ryan OBE – people from two very differing worlds who are using their diametric approaches to achieve great things. Previous projects include the groundbreaking Wonderland project which has now been seen by over 11 million people worldwide.

…
An exclusive film starring Erin O’Connor with soundtrack by Radiohead is already going viral with millions of views.

Here’s a brief preview of the film,

Here’s a link to the Catalytic Clothing website where you can see the entire film.

For those interested in the science part of the Catalytic Clothing story (from the Catalytic Clothing website, Scientific Background/FAQS page),

What is the science behind Catalytic Clothing?

Catalytic Clothing harnesses the power of a photocatalyst to break down air borne pollutants. A catalyst is a term used to describe something that makes a reaction proceed at a greater rate but isn’t actually consumed during that reaction. A photocatalyst gains the energy it needs to be active from light.

Where do the pollutants come from?

The two biggest sources of air borne pollutants are industry and motor vehicles. Although the majority of the pollutants are prevented from reaching the air, using technology such as catalytic converters, some do escape. It is these pollutants that Catalytic Clothing will break down.

How are the pollutants broken down?

When the light shines on the photocatalyst, the electrons in the material are rearranged and they become more reactive. These electrons are then able to react with the water in the air and break it apart into 2 radicals. A radical is an extremely reactive molecule. These radicals then react with the pollutants and cause them to break down into non-harmful chemicals.

What happens to the pollutants after they’ve been broken down?

The Catalytic Clothing technology is designed to breakdown the pollutants straight away. However, some pollutants may become attached without being broken down. In this case, the pollutants will be washed off during subsequent laundering. This actually already happens with normal clothing.

Is this technology used in any other products?

Photocatalysts have been incorporated into several commercially available products that possess de-polluting properties. These products include paints, cements and paving stones. [Note 1: In the RIA Novosti video, Ryan mentions titanium dioxide specifically. Note 2: Coatings for pavements in Germany are mentioned in my August 2, 2010 posting; scroll down 1/2 way.]

How is the technology delivered to the surface of the clothing?

The photocatalyst is delivered to the surface of the clothing during the traditional laundry procedure as an additive within a standard product such as a fabric conditioner. The active agent is packaged within a shell that is attracted towards, and subsequently binds to, the surface of the clothing during the washing cycle.

Why do we need mass participation to produce a noticeable reduction in the level of pollution?

Although any garment that is treated with the product becomes active, a single garment is only able to remove a small proportion of the air borne pollutants. Therefore, a large number of individuals, all acting together, is required to produce a noticeable reduction in the level of pollution.

How many people would need to participate to produce a noticeable reduction in the level of pollution?

An estimate of the required level of uptake for the Catalytic Clothing indicates that a significant reduction in the level of air borne pollutants in a large city such as London could be achieved if, for every metre of pavement width, 30 people wearing Catalytic Clothes walked past each minute.

Would someone wearing Catalytic Clothing be at a greater risk of exposure to pollutants?

No. The Catalytic Clothing technology won’t actively attract any pollutants. Instead, it will break down anything that comes within very close proximity of the photocatalyst’s surface.

How would society benefit if Catalytic Clothing was widely introduced?

Exposure to air borne pollutants presents a risk to human health and also has a detrimental effect on ecosystems and vegetation. Air pollution is currently estimated to reduce the life expectancy of every person in the UK by an average of 7-8 months. The widespread introduction of Catalytic Clothing would dramatically reduce the level of air borne pollutants, thereby improving the quality of life for all members of society.

The main sponsor for the project is Ecover (from the news release),

Ecover, who are the main sponsors of the Catalytic Clothing cultural campaign, are one of the world´s leading suppliers of green and sustainable cleaning products. All of their products are made with fully renewable plant-based ingredients and produced using a totally biochemical process. Ecover has been recognised by the United Nations Environment programme (UNEP) for their outstanding practical achievements for the protection and improvement of our environment.

Here’s the Ecover website.

This really is the last posting for today. Happy Weekend!

ETA July 11, 2011: Here’s a posting by Jasmin Malik Chua about the project at the Ecouterre website.