Tag Archives: axons

Neuromorphic wires (inspired by nerve cells) amplify their own signals—no amplifiers needed

Katherine Bourzac’s September 16, 2024 article for the IEEE (Institute for Electrical and Electronics Engineers) Spectrum magazine provides an accessible (relatively speaking) description of a possible breakthrough for neuromorphic computing, Note: Links have been removed,

In electrical engineering, “we just take it for granted that the signal decays” as it travels, says Timothy Brown, a postdoc in materials physics at Sandia National Lab who was part of the group of researchers who made the self-amplifying device. Even the best wires and chip interconnects put up resistance to the flow of electrons, degrading signal quality over even relatively small distances. This constrains chip designs—lossy interconnects are broken up into ever smaller lengths, and signals are bolstered by buffers and drivers. A 1-square-centimeter chip has about 10,000 repeaters to drive signals, estimates R. Stanley Williams, a professor of computer engineering at Texas A&M University.

Williams is one of the pioneers of neuromorphic computing, which takes inspiration from the nervous system. Axons, the electrical cables that carry signals from the body of a nerve cell to synapses where they connect with projections from other cells, are made up of electrically resistant materials. Yet they can carry high fidelity signals over long distances. The longest axons in the human body are about 1 meter, running from the base of the spine to the feet. Blue whales are thought to have 30 m long axons stretching to the tips of their tails. If something bites the whale’s tail, it will react rapidly. Even from 30 meters away, “the pulses arrive perfectly,” says Williams. “That’s something that doesn’t exist in electrical engineering.”

That’s because axons are active transmission lines: they provide gain to the signal along their length. Williams says he started pondering how to mimic this in an inorganic system 12 years ago. A grant from the US Department of Energy enabled him to build a team with the necessary resources to make it happen. The team included Williams, Brown, and Suhas Kumar, a materials physicist at Sandia.

Axons are coated with an insulating layer called the myelin sheath. Where there are gaps in the sheath, negatively charged sodium ions and positively charged potassium ions can move in and out of the axon, changing the voltage across the cell membrane and pumping in energy in the process. Some of that energy gets taken up by the electrical signal, amplifying it.

Williams and his team wanted to mimic this in a simple structure. They didn’t try to mimic all the physical structures in axons—instead, they sought guidance in a mathematical description of how they amplify signals. Axons operate in a mode called the “edge of chaos,” which combines stable and unstable qualities. This may seem inherently contradictory. Brown likens this kind of system to a saddle that’s curved with two dips. The saddle curves up towards the front and the back, keeping you stable as you rock back and forth. But if you get jostled from side to side, you’re more likely to fall off. When you’re riding in the saddle, you’re operating at the edge of chaos, in a semistable state. In the abstract space of electrical engineering, that jostling is equivalent to wiggles in current and voltage.

There’s a long way to go from this first experimental demonstration to a reimagining of computer chip interconnects. The team is providing samples for other researchers [emphasis mine] who want to verify their measurements. And they’re trying other materials to see how well they do—LaCoO3 [lanthanum colbalt oxide] is only the first one they’ve tested.

Williams hopes this research will show electrical engineers new ideas about how to move forward. “The dream is to redesign chips,” he says. Electrical engineers have long known about nonlinear dynamics, but have hardly ever taken advantage of them, Williams says. “This requires thinking about things and doing measurements differently than they have been done for 50 years,” he says.

If you have the time, please read Bourzac’s September 16, 2024 article in its entirety. For those who want the technical nitty gritty, here’s a link to and a citation for the paper,

Axon-like active signal transmission by Timothy D. Brown, Alan Zhang, Frederick U. Nitta, Elliot D. Grant, Jenny L. Chong, Jacklyn Zhu, Sritharini Radhakrishnan, Mahnaz Islam, Elliot J. Fuller, A. Alec Talin, Patrick J. Shamberger, Eric Pop, R. Stanley Williams & Suhas Kumar. Nature volume 633, pages 804–810 (2024) DOI: https://doi.org/10.1038/s41586-024-07921 Published online: 11 September 2024 Issue Date: 26 September 2024

This paper is open access.

Artificial synapse based on tantalum oxide from Korean researchers

This memristor story comes from South Korea as we progress on the way to neuromorphic computing (brainlike computing). A Sept. 7, 2018 news item on ScienceDaily makes the announcement,

A research team led by Director Myoung-Jae Lee from the Intelligent Devices and Systems Research Group at DGIST (Daegu Gyeongbuk Institute of Science and Technology) has succeeded in developing an artificial synaptic device that mimics the function of the nerve cells (neurons) and synapses that are response for memory in human brains. [sic]

Synapses are where axons and dendrites meet so that neurons in the human brain can send and receive nerve signals; there are known to be hundreds of trillions of synapses in the human brain.

This chemical synapse information transfer system, which transfers information from the brain, can handle high-level parallel arithmetic with very little energy, so research on artificial synaptic devices, which mimic the biological function of a synapse, is under way worldwide.

Dr. Lee’s research team, through joint research with teams led by Professor Gyeong-Su Park from Seoul National University; Professor Sung Kyu Park from Chung-ang University; and Professor Hyunsang Hwang from Pohang University of Science and Technology (POSTEC), developed a high-reliability artificial synaptic device with multiple values by structuring tantalum oxide — a trans-metallic material — into two layers of Ta2O5-x and TaO2-x and by controlling its surface.

A September 7, 2018 DGIST press release (also on EurekAlert), which originated the news item, delves further into the work,

The artificial synaptic device developed by the research team is an electrical synaptic device that simulates the function of synapses in the brain as the resistance of the tantalum oxide layer gradually increases or decreases depending on the strength of the electric signals. It has succeeded in overcoming durability limitations of current devices by allowing current control only on one layer of Ta2O5-x.

In addition, the research team successfully implemented an experiment that realized synapse plasticity [or synaptic plasticity], which is the process of creating, storing, and deleting memories, such as long-term strengthening of memory and long-term suppression of memory deleting by adjusting the strength of the synapse connection between neurons.

The non-volatile multiple-value data storage method applied by the research team has the technological advantage of having a small area of an artificial synaptic device system, reducing circuit connection complexity, and reducing power consumption by more than one-thousandth compared to data storage methods based on digital signals using 0 and 1 such as volatile CMOS (Complementary Metal Oxide Semiconductor).

The high-reliability artificial synaptic device developed by the research team can be used in ultra-low-power devices or circuits for processing massive amounts of big data due to its capability of low-power parallel arithmetic. It is expected to be applied to next-generation intelligent semiconductor device technologies such as development of artificial intelligence (AI) including machine learning and deep learning and brain-mimicking semiconductors.

Dr. Lee said, “This research secured the reliability of existing artificial synaptic devices and improved the areas pointed out as disadvantages. We expect to contribute to the development of AI based on the neuromorphic system that mimics the human brain by creating a circuit that imitates the function of neurons.”

Here’s a link to and a citation for the paper,

Reliable Multivalued Conductance States in TaOx Memristors through Oxygen Plasma-Assisted Electrode Deposition with in Situ-Biased Conductance State Transmission Electron Microscopy Analysis by Myoung-Jae Lee, Gyeong-Su Park, David H. Seo, Sung Min Kwon, Hyeon-Jun Lee, June-Seo Kim, MinKyung Jung, Chun-Yeol You, Hyangsook Lee, Hee-Goo Kim, Su-Been Pang, Sunae Seo, Hyunsang Hwang, and Sung Kyu Park. ACS Appl. Mater. Interfaces, 2018, 10 (35), pp 29757–29765 DOI: 10.1021/acsami.8b09046 Publication Date (Web): July 23, 2018

Copyright © 2018 American Chemical Society

This paper is open access.

You can find other memristor and neuromorphic computing stories here by using the search terms I’ve highlighted,  My latest (more or less) is an April 19, 2018 posting titled, New path to viable memristor/neuristor?

Finally, here’s an image from the Korean researchers that accompanied their work,

Caption: Representation of neurons and synapses in the human brain. The magnified synapse represents the portion mimicked using solid-state devices. Credit: Daegu Gyeongbuk Institute of Science and Technology(DGIST)