Tag Archives: batteries

Want better energy storage materials? Add salt

An April 22, 2016 news item on Nanowerk reveals a secret to better energy storage materials,

The secret to making the best energy storage materials is growing them with as much surface area as possible. Like baking, it requires just the right mixture of ingredients prepared in a specific amount and order at just the right temperature to produce a thin sheet of material with the perfect chemical consistency to be useful for storing energy. A team of researchers from Drexel University, Huazhong University of Science and Technology (HUST) and Tsinghua University recently discovered a way to improve the recipe and make the resulting materials bigger and better and soaking up energy — the secret? Just add salt.

An April 22, 2016 Drexel University news release (also on EurekAlert), which originated the news item, provides more detail,

The team’s findings, which were recently published in the journal Nature Communications, show that using salt crystals as a template to grow thin sheets of conductive metal oxides make the materials turn out larger and more chemically pure — which makes them better suited for gathering ions and storing energy.

“The challenge of producing a metal oxide that reaches theoretical performance values is that the methods for making it inherently limit its size and often foul its chemical purity, which makes it fall short of predicted energy storage performance,” said Jun Zhou, a professor at HUST’s Wuhan National Laboratory for Optoelectronics and an author of the research. Our research reveals a way to grow stable oxide sheets with less fouling that are on the order of several hundreds of times larger than the ones that are currently being fabricated.”

In an energy storage device — a battery or a capacitor, for example — energy is contained in the chemical transfer of ions from an electrolyte solution to thin layers of conductive materials. As these devices evolve they’re becoming smaller and capable of holding an electric charge for longer periods of time without needing a recharge. The reason for their improvement is that researchers are fabricating materials that are better equipped, structurally and chemically, for collecting and disbursing ions.

In theory, the best materials for the job should be thin sheets of metal oxides, because their chemical structure and high surface area makes it easy for ions to attach — which is how energy storage occurs. But the metal oxide sheets that have been fabricated in labs thus far have fallen well short of their theoretical capabilities.

According to Zhou, Tang [?] and the team from HUST, the problem lies in the process of making the nanosheets — which involves either a deposition from gas or a chemical etching — often leaves trace chemical residues that contaminate the material and prevent ions from bonding to it. In addition, the materials made in this way are often just a few square micrometers in size.

Using salt crystals as a substrate for growing the crystals lets them spread out and form a larger sheet of oxide material. Think of it like making a waffle by dripping batter into a pan versus pouring it into a big waffle iron; the key to getting a big, sturdy product is getting the solution — be it batter, or chemical compound — to spread evenly over the template and stabilize in a uniform way.

“This method of synthesis, called ‘templating’ — where we use a sacrificial material as a substrate for growing a crystal — is used to create a certain shape or structure,” said Yury Gogotsi, PhD, University and Trustee Chair professor in Drexel’s College of Engineering and head of the A.J. Drexel Nanomaterials Institute, who was an author of the paper. “The trick in this work is that the crystal structure of salt must match the crystal structure of the oxide, otherwise it will form an amorphous film of oxide rather than a thing, strong and stable nanocrystal. This is the key finding of our research — it means that different salts must be used to produce different oxides.”

Researchers have used a variety of chemicals, compounds, polymers and objects as growth templates for nanomaterials. But this discovery shows the importance of matching a template to the structure of the material being grown. Salt crystals turn out to be the perfect substrate for growing oxide sheets of magnesium, molybdenum and tungsten.

The precursor solution coats the sides of the salt crystals as the oxides begin to form. After they’ve solidified, the salt is dissolved in a wash, leaving nanometer-thin two-dimensional sheets that formed on the sides of the salt crystal — and little trace of any contaminants that might hinder their energy storage performance. By making oxide nanosheets in this way, the only factors that limit their growth is the size of the salt crystal and the amount of precursor solution used.

“Lateral growth of the 2D oxides was guided by salt crystal geometry and promoted by lattice matching and the thickness was restrained by the raw material supply. The dimensions of the salt crystals are tens of micrometers and guide the growth of the 2D oxide to a similar size,” the researchers write in the paper. “On the basis of the naturally non-layered crystal structures of these oxides, the suitability of salt-assisted templating as a general method for synthesis of 2D oxides has been convincingly demonstrated.”

As predicted, the larger size of the oxide sheets also equated to a greater ability to collect and disburse ions from an electrolyte solution — the ultimate test for its potential to be used in energy storage devices. Results reported in the paper suggest that use of these materials may help in creating an aluminum-ion battery that could store more charge than the best lithium-ion batteries found in laptops and mobile devices today.

Gogotsi, along with his students in the Department of Materials Science and Engineering, has been collaborating with Huazhong University of Science and Technology since 2012 to explore a wide variety of materials for energy storage application. The lead author of the Nature Communications article, Xu Xiao, and co-author Tiangi Li, both Zhou’s doctoral students, came to Drexel as exchange students to learn about the University’s supercapacitor research. Those visits started a collaboration, which was supported by Gogotsi’s annual trips to HUST. While the partnership has already yielded five joint publications, Gogotsi speculates that this work is only beginning.

“The most significant result of this work thus far is that we’ve demonstrated the ability to generate high-quality 2D oxides with various compositions,” Gogotsi said. “I can certainly see expanding this approach to other oxides that may offer attractive properties for electrical energy storage, water desalination membranes, photocatalysis and other applications.”

Here’s a link to and a citation for the paper,

Scalable salt-templated synthesis of two-dimensional transition metal oxides by Xu Xiao, Huaibing Song, Shizhe Lin, Ying Zhou, Xiaojun Zhan, Zhimi Hu, Qi Zhang, Jiyu Sun, Bo Yang, Tianqi Li, Liying Jiao, Jun Zhou, Jiang Tang, & Yury Gogotsi. Nature Communications 7, Article number:  11296 doi:10.1038/ncomms11296 Published 22 April 2016

This is an open access paper.

‘Beleafing’ in magic; a new type of battery

A Jan. 28, 2016 news item on ScienceDaily announces the ‘beleaf’,

Scientists have a new recipe for batteries: Bake a leaf, and add sodium. They used a carbonized oak leaf, pumped full of sodium, as a demonstration battery’s negative terminal, or anode, according to a paper published yesterday in the journal ACS Applied Materials Interfaces.

Scientists baked a leaf to demonstrate a battery. Credit: Image courtesy of Maryland NanoCenter

Scientists baked a leaf to demonstrate a battery.
Credit: Image courtesy of Maryland NanoCenter

A Jan. ??, 2016 Maryland NanoCenter (University of Maryland) news release, which originated the news item, provides more information about the nature (pun intended) of the research,

“Leaves are so abundant. All we had to do was pick one up off the ground here on campus,” said Hongbian Li, a visiting professor at the University of Maryland’s department of materials science and engineering and one of the main authors of the paper. Li is a member of the faculty at the National Center for Nanoscience and Technology in Beijing, China.

Other studies have shown that melon skin, banana peels and peat moss can be used in this way, but a leaf needs less preparation.

The scientists are trying to make a battery using sodium where most rechargeable batteries sold today use lithium. Sodium would hold more charge, but can’t handle as many charge-and-discharge cycles as lithium can.

One of the roadblocks has been finding an anode material that is compatible with sodium, which is slightly larger than lithium. Some scientists have explored graphene, dotted with various materials to attract and retain the sodium, but these are time consuming and expensive to produce.  In this case, they simply heated the leaf for an hour at 1,000 degrees C (don’t try this at home) to burn off all but the underlying carbon structure.

The lower side of the maple [?] leaf is studded with pores for the leaf to absorb water. In this new design, the pores absorb the sodium electrolyte. At the top, the layers of carbon that made the leaf tough become sheets of nanostructured carbon to absorb the sodium that carries the charge.

“The natural shape of a leaf already matches a battery’s needs: a low surface area, which decreases defects; a lot of small structures packed closely together, which maximizes space; and internal structures of the right size and shape to be used with sodium electrolyte,” said Fei Shen, a visiting student in the department of materials science and engineering and the other main author of the paper.

“We have tried other natural materials, such as wood fiber, to make a battery,” said Liangbing Hu, an assistant professor of materials science and engineering. “A leaf is designed by nature to store energy for later use, and using leaves in this way could make large-scale storage environmentally friendly.”

The next step, Hu said, is “to investigate different types of leaves to find the best thickness, structure and flexibility” for electrical energy storage.  The researchers have no plans to commercialize at this time.

Here’s a link to and a citation for the paper,

Carbonized-leaf Membrane with Anisotropic Surfaces for Sodium-ion Battery by Hongbian Li, Fei Shen, Wei Luo, Jiaqi Dai, Xiaogang Han, Yanan Chen, Yonggang Yao, Hongli Zhu, Kun Fu, Emily Hitz, and Liangbing Hu. ACS Appl. Mater. Interfaces, 2016, 8 (3), pp 2204–2210 DOI: 10.1021/acsami.5b10875 Publication Date (Web): January 4, 2016

Copyright © 2016 American Chemical Society

This paper is behind a paywall.

Wearable technologies, electric vehicles and conundrums at Wollongong University (Australia)

A July 25, 2015 news item on Nanowerk announces research at the University of Wollongong designed to address a conundrum (Note: A link has been removed),

UOW’s Institute for Superconducting and Electronic Materials (ISEM) has successfully pioneered a way to construct a flexible, foldable and lightweight energy storage device that provides the building blocks for next-generation batteries needed to power wearable electronics and implantable medical devices (ACS Central Science, “Self-Assembled Multifunctional Hybrids: Toward Developing High-Performance Graphene-Based Architectures for Energy Storage Devices”).

The conundrum researchers have faced in developing miniature energy storage devices, such as batteries and supercapacitors, has been figuring out how to increase the surface area of the device, to store more charge, without making it larger.

A July 27, 2015 University of Wollongong news release by Grant Reynolds, which originated the news item, describes the research in more detail,

To solve this problem, a team of PhD students, led by Dr Konstantin Konstantinov under the patronage of ISEM Director Professor Shi Xue Dou and with the support of Professor Hua Kun Liu, the head of ISEM Energy Storage Division, have developed a three-dimensional structure using a flat-pack self-assembly of three components: graphene, a conductive polymer and carbon nanotubes, which are atom-thick lattice-like networks of carbon formed into cylinders.

Graphene, made from single atom-thick layers of graphite, was a suitable candidate due its electronic performance and mechanical strength.

“We knew in theory that if you can make a sort of carbon skeleton you have a greater surface area and greater surface area means more charge,” Dr Konstantinov said. “If we could efficiently separate the layers of carbon we could then use both surfaces of each layer for charge accumulation. The problem we faced was that fabricating these 3D shapes in practice, not just theory, is a challenging, if not impossible task.”

The solution was to flat-pack the components by building the 3D shape layer-by-layer, much like a miniature exercise in cake decoration. The graphene in liquid form was mixed with the conductive polymer and reduced to solid and the carbon nanotubes carefully inserted between the graphene layers to form a self-assembled flat-packed, wafer-thin supercapacitor material.

“The real challenge was how to assemble these three components into a single structure with the best use of the space available,” PhD student Monirul Islam said. “Getting the proportions or ratios of the components appropriately in order to obtain a composite material with maximum energy storage performance was another challenge.”

Wrong proportions of either ingredient result in a lumpy mess, or a 3D shape that isn’t strong enough to retain the needed flexibility as well as the charge storage ability. There’s also elegance in the simplicity of the team’s design: the researchers dispersed the components in liquid crystalline, which enabled natural chemical interactions to prevent the graphene layers clumping together.

The result was a 3D shape with, thanks to the carbon nanotubes, a massive surface area, excellent charge capacity that is also foldable. It can also be cheaply and easily fabricated without the need for expensive vacuum chambers or sophisticated equipment.

“Our graphene-based flexible composite is highly conductive, lightweight, is able to fold like a roll or stack like a paper in electronic devices to store a huge amount of charge,” Monirul said. “This material can store charge in a second and deliver the charge in superfast speed and will be more lightweight than traditional batteries used in present day’s electronics.”

The ISEM study has been financially supported by the Automotive Australia 2020 CRC as part of its research into electric vehicles. ISEM is the program leader for electrification and plays crucial role for design of next generation electric vehicles A key to unlocking the electric vehicle’s capability is a lightweight and powerful battery pack.

“Our simple fabrication method of eco-friendly materials with increased performance has great potential to be scaled up for use supercapacitor and battery technology. Our next step is to use this material to fabricate flexible wearable supercapacitors with high power density and energy density as well as large scale supercapacitors for electric vehicles.”

Here’s a link to and a citation for the paper,

Self-Assembled Multifunctional Hybrids: Toward Developing High-Performance Graphene-Based Architectures for Energy Storage Devices by Md. Monirul Islam, Seyed Hamed Aboutalebi, Dean Cardillo, Hua Kun Liu, Konstantin Konstantinov, and Shi Xue Dou. ACS Cent. Sci., 2015, 1 (4), pp 206–216 DOI: 10.1021/acscentsci.5b00189 Publication Date (Web): July 2, 2015

Copyright © 2015 American Chemical Society

This appears to be an open access paper.

Combining the best qualities of batteries and supercapacitors at the University of California at Los Angeles (UCLA)

There’s a reason why I’ve been feeling impatient about batteries and supercapacitors according to an April 2, 2015 news item on Nanowerk,

The dramatic rise of smartphones, tablets, laptops and other personal and portable electronics has brought battery technology to the forefront of electronics research. Even as devices have improved by leaps and bounds, the slow pace of battery development has held back technological progress.

Now, researchers at UCLA’s California NanoSystems Institute have successfully combined two nanomaterials to create a new energy storage medium that combines the best qualities of batteries and supercapacitors.

An April 1, 2015 UCLA news release, which originated the news item, describes the challenge and how the scientists addressed it (Note: A link has been removed),

Supercapacitors are electrochemical components that can charge in seconds rather than hours and can be used for 1 million recharge cycles. Unlike batteries, however, they do not store enough power to run our computers and smartphones.

The new hybrid supercapacitor stores large amounts of energy, recharges quickly and can last for more than 10,000 recharge cycles. The CNSI scientists also created a microsupercapacitor that is small enough to fit in wearable or implantable devices. Just one-fifth the thickness of a sheet of paper, it is capable of holding more than twice as much charge as a typical thin-film lithium battery.

The study, led by Richard Kaner, distinguished professor of chemistry and biochemistry and materials science and engineering, and Maher El-Kady, a postdoctoral scholar, was published in the Proceedings of the National Academy of Sciences.

“The microsupercapacitor is a new evolving configuration, a very small rechargeable power source with a much higher capacity than previous lithium thin-film microbatteries,” El-Kady said.

The new components combine laser-scribed graphene, or LSG — a material that can hold an electrical charge, is very conductive, and charges and recharges very quickly — with manganese dioxide, which is currently used in alkaline batteries because it holds a lot of charge and is cheap and plentiful. They can be fabricated without the need for extreme temperatures or the expensive “dry rooms” required to produce today’s supercapacitors.

“Let’s say you wanted to put a small amount of electrical current into an adhesive bandage for drug release or healing assistance technology,” Kaner said. “The microsupercapacitor is so thin you could put it inside the bandage to supply the current. You could also recharge it quickly and use it for a very long time.”

The researchers found that the supercapacitor could quickly store electrical charge generated by a solar cell during the day, hold the charge until evening and then power an LED overnight, showing promise for off-grid street lighting.

“The LSG–manganese-dioxide capacitors can store as much electrical charge as a lead acid battery, yet can be recharged in seconds, and they store about six times the capacity of state-of-the-art commercially available supercapacitors,” Kaner said. “This scalable approach for fabricating compact, reliable, energy-dense supercapacitors shows a great deal of promise in real-world applications, and we’re very excited about the possibilities for greatly improving personal electronics technology in the near future.”

Here’s a link to and a citation for the paper,

Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage by Maher F. El-Kady, Melanie Ihns, Mengping Li, Jee Youn Hwang, Mir F. Mousavi, Lindsay Chaney, Andrew T. Lech, and Richard B. Kaner. Published online before print March 23, 2015, doi: 10.1073/pnas.1420398112 PNAS March 23, 2015

This paper is behind a paywall.

One last bit, Dexter Johnson in an April 3, 2015 post on his Nanoclast blog (on the IEEE [Institute of Electrical and Electronics Engineers] website) provides some insight into the research,

The story of graphene in supercapacitors can be represented by the old adage: its greatest strength is its greatest weakness. Of course, the name of the game in supercapacitor energy density is surface area. The greater the surface area, the greater number of ions you can store on the electrodes. While graphene has a theoretical surface area of 2630 square meters per gram, this density is only possible with a single, standalone graphene sheet.

But you can’t actually use a standalone sheet for the electrode of a supercapacitor because it will result in a very low volumetric capacitance. ….

So, while the 2-D characteristic of graphene may limit its usable surface area for supercapacitors, it does offer a way to make supercapacitors with small dimensions, something that would be impossible with activated carbon.

It is this strength that the CNSI researchers are aiming to exploit in their supercapacitor, which is small enough to be used as a wearable or implantable device. …

I recommend reading Dexter’s post in its entirety.

Plug yourself in and charge up the battery for your pacemaker, deep brain stimulator, or …

Given that changing a battery in a pacemaker or in a deep brain stimulator requires surgery (cardiac or brain), researchers are looking for ways to keep those batteries and others in similarly hard-to-reach places going for longer as per my April 9, 2009 posting about batteries that run on blood. Some of the latest work involves wireless transmission according to a Dec. 4, 2013 news release on EurekAlert,

Human beings don’t come with power sockets, but a growing numbers of us have medical implants that run off electricity. To keep our bionic body parts from powering down, a group of Arizona researchers is developing a safe, noninvasive, and efficient means of wireless power transmission through body tissue. The team presents their findings at the 166th meeting of the Acoustical Society of America, held Dec. 2 – 6 [2013] in San Francisco, Calif.

Medical implants treat a variety of conditions such as chronic pain, Parkinson’s disease, deep brain tremors, heart rhythm disturbances, and nerve and muscle disorders. If the batteries in the devices lose their charge, minor surgery is needed to replace them, causing discomfort, introducing the risk of infection, and increasing the cost of treatment.

This is a scenario the Arizona researchers are aiming to change.

Their novel wireless power approach is based on piezoelectric generation of ultrasound. The Greek root, “piezo”, means “squeeze.” In piezoelectrical systems, materials are squeezed or stressed to produce a voltage. In turn, applied voltages can cause compression or extension. Piezoelectric materials have specific crystalline structures. The team’s piezoelectric system has been tested in animal tissue with encouraging results.

“The goal of this approach is wireless power transmission to human implantable power generators (IPGs),” explained lead researcher Leon J. Radziemski of Tucson-based Piezo Energy Technologies. “Charging experiments were performed on 4.1 Volt medical-grade lithium-ion batteries. Currents of 300 milliamperes (mA) have been delivered across tissue depths of up to 1.5 centimeters. At depths of 5 centimeters, 20 mA were delivered. Currents such as these can service most medical-grade rechargeable batteries.”

With Dr. Inder Makin, an experienced ultrasound researcher, the team has tested the device in pigs to demonstrate safe charging over several hours of ultrasound exposure. The system works like this: A source such as a wall plug or battery powers the transmitter. Ultrasound passes from the transmitter through the intervening tissue to the implanted IPG housing the piezoelectric receiver. After positioning the transmitter, the patient can control the procedure from a hand-held device that communicates with the implant. When charging is complete, the implant signals this and turns off the transmitter.

Wireless recharging transmission has been tried before using a different technology, electromagnetic recharging. Given the proliferation of battery-powered medical implanted therapies, the Radziemski team sees an emerging and expanding need for increased rechargeable power options.

“Ultrasound rechargeable batteries can extend the time between replacements considerably, reducing health care costs and patient concerns,” Radziemski said. The next step involves further testing and development in hopes of commercializing the technology within two to five years.

You can find out more about the Fall 2013 meeting of the Acoustical Society of America here where you can find the abstracts for the presentations.

Battery-free wireless devices and a true internet of things in our future say University of Washington (state) scientists

An Aug. 13, 2013 University of Washington (state) news release by Michelle Ma (also on EurekAlert) features a technique that could render batteries for a new wireless communication network unnecessary,

University of Washington engineers have created a new wireless communication system that allows devices to interact with each other without relying on batteries or wires for power.

The new communication technique, which the researchers call “ambient backscatter,” takes advantage of the TV and cellular transmissions that already surround us around the clock. Two devices communicate with each other by reflecting the existing signals to exchange information. The researchers built small, battery-free devices with antennas that can detect, harness and reflect a TV signal, which then is picked up by other similar devices.

The technology could enable a network of devices and sensors to communicate with no power source or human attention needed.

“We can repurpose wireless signals that are already around us into both a source of power and a communication medium,” said lead researcher Shyam Gollakota, a UW assistant professor of computer science and engineering. “It’s hopefully going to have applications in a number of areas including wearable computing, smart homes and self-sustaining sensor networks.”

The researchers published their results at the Association for Computing Machinery’s Special Interest Group on Data Communication 2013 conference in Hong Kong, which began Aug. 13 [2013]. They have received the conference’s best-paper award for their research.

“Our devices form a network out of thin air,” said co-author Joshua Smith, a UW associate professor of computer science and engineering and of electrical engineering. “You can reflect these signals slightly to create a Morse code of communication between battery-free devices.”

Here’s a little information about the technique (from the new release),

The researchers tested the ambient backscatter technique with credit card-sized prototype devices placed within several feet of each other. For each device the researchers built antennas into ordinary circuit boards that flash an LED light when receiving a communication signal from another device.

Groups of the devices were tested in a variety of settings in the Seattle area, including inside an apartment building, on a street corner and on the top level of a parking garage. These locations ranged from less than half a mile away from a TV tower to about 6.5 miles away.

They found that the devices were able to communicate with each other, even the ones farthest from a TV tower. The receiving devices picked up a signal from their transmitting counterparts at a rate of 1 kilobit per second when up to 2.5 feet apart outdoors and 1.5 feet apart indoors. This is enough to send information such as a sensor reading, text messages and contact information.

It’s also feasible to build this technology into devices that do rely on batteries, such as smartphones. It could be configured so that when the battery dies, the phone could still send text messages by leveraging power from an ambient TV signal.

The applications are endless, the researchers say, and they plan to continue advancing the capacity and range of the ambient backscatter communication network.

The researchers have a produced a video demonstrating  ambient backscatter (for anyone not familiar with the term RF, it’s radio frequency),

If I understand this rightly, ambient backscatter takes advantage of the signals already present in the atmosphere, which means these new battery-free devices are dependent on other devices which do need batteries, cell towers, etc.(ETA Aug. 1, 2013:  as well as wireline] devices otherwise there won’t be any ambient backscatter.

Materials research and nanotechnology for clean energy at Addis Ababa University (Ethiopia)

Getting to the bottom line of a complex set of  interlinked programs and initiatives, it’s safe to say that a group of US students went to study with research Addis Ababa University (Ethiopia) in the first Materials Research School which was held Dec. 9 -21, 2012.

Rutgers University (New Jersey, US)  student Aleksandra Biedron attended the Materials Research School as a member of a joint Rutgers University-Princeton University Nanotechnology for Clean Energy graduate training program (one of the US National Science Foundation’s Integrative Graduate Education Research Traineeship [IGERT] programs).

In a Summer 2013 (volume 14) issue of Rutgers University’s Chemistry and Chemical Biology News, Biedron describes the experience,

The program brought together approximately 50 graduate students and early-career materials researchers from across the United States and East Africa, as well as 15 internationally recognized instructors, for two weeks of lectures, problem solving, and cultural exchange. “I was interested in meeting young African scientists to discuss energy materials, a universal concern, which is relevant to my research in ionic liquids,” said Biedron, a graduate of Livingston High School [Berkeley Heights, New Jersey]. “I was also excited to see Addis Ababa, Ethiopia, and experience the culture and historical attractions.”

A cornerstone of the Nanotechnology for Clean Energy IGERT program is having the students apply their training in a dynamic educational exchange program with African institutions, promoting development of the students’ global awareness and understanding of the challenges involved in global scientific and economic development. In Addis Ababa, Biedron quickly noticed how different the scope of research was between the African scientists and their international counterparts.

“The African scientists’ research was really solution-based,” said Biedron. “They were looking at how they could use their natural resources to solve some of their region’s most pressing issues, not only for energy, but also health, clean water, and housing. You don’t really see that as much in the U.S. because we are already thinking about the future, 10 or 20 years from now.”

H/T centraljerseycentral.com, Aug. 1, 2013 news item.

I found a little more information about the first Materials Research School on this Columbia University JUAMI (Joint US-Africa Materials Initiative) webpage,

The Joint US-Africa Materials Initiative
Announces its first Materials Research School
To be held in Addis Ababa, Ethiopia, December 9-21, 2012

Theme of the school:

The first school will concentrate on materials research for sustainable energy. Tutorials and seminar topics will range from photocatalysis and photovoltaics to fuel cells and batteries.

Goals of the school:

The initiative aims to build materials science research and collaborations between the United States and Africa, with an initial focus on East Africa, and to develop ties between young materials researchers in both regions in a school taught by top materials researchers. The school will bring together approximately 50 PhD and early career materials researchers from across the US and East Africa, and 15 internationally recognized instructors, for two weeks of lectures, problem solving and cultural exchange in historic Addis Ababa, Ethiopia. Topics include photocatalysis, photovoltaics, thermoelectrics, fuel cells, and batteries.

I also found this on the IGERT homepage,

IGERT Trainees participate in:
  • Interdisciplinary courses in the fundamentals of energy technology, nanotechnology and energy policy.
  • Dissertation research emphasizing nanotechnology and energy.
  • Dynamic educational exchange between U.S. and select African institutions.

Lomiko Metals, batteries, graphite/graphene, and a strategic alliance with the Research Foundation of Stony Brook University and Graphene Laboratories, Inc.

Lomiko Metals, a Vancouver-based (Canada)  company, has been mentioned here with respect to a property in Québec (Quatre Milles) containing graphite flakes in an April 17, 2013 posting, which also mentioned the company’s strategic alliance with Graphene Laboratories Inc.

Building on that previous announcement Lomiko Metals has announced a new member to the strategic alliance in a May 30, 2013 news item on Azonano,

LOMIKO METALS INC. (the “Company”) announces that the Research Foundation of Stony Brook University (RF), Graphene Laboratories, Inc. (Graphene Labs) and Lomiko Metals, Inc. have agreed to investigate novel, energy-focused applications for graphene.

“This new agreement with Stony Brook University’s researchers means Lomiko is participating in the development of the technology graphene makes possible,” commented Paul Gill, CEO of Lomiko. “Using graphene to achieve very high energy densities in super capacitors and batteries is a transfomative technology. Strategically, Lomiko needs to be participating in this vital research to achieve the goal of creating a vertically integrated graphite and graphene business.”

The May 29, 2013 Lomiko Metals news release, which originated the news item, has more details,

Under its Strategic Alliance Agreement with Lomiko, Graphene Labs — a leading graphene manufacturer — will process graphite samples from Lomiko’s Quatre Milles property into graphene. The Research Foundation, through Stony Brook University’s Advanced Energy Research and Technology Center (AERTC) and the Center for Advanced Sensor Technology (Sensor CAT), will then examine the most efficient methods of using this graphene for energy storage applications. There is no certainty the roposed [sic]  operaton [sic] will be economically viable.

For all parties involved, the goal of this collaboration is to map commercially viable routes for the fabrication of graphene-based energy storage devices. By participating in these projects, the partners will address the cost of graphene production, as well as how best to integrate the material into commercial energy storage devices.

As I find the various business/academic partnerships interesting, I’m including the About section of the news release,

About Graphene Laboratories Inc.

Graphene Laboratories, Inc. primary focus is to apply fundamental science and technology to bring functional advanced materials and devices to market.
Graphene Laboratories Inc. operates the Graphene Supermarket® (www.graphene-supermarket.com), and is a leading supplier of advanced 2D materials to customers around the globe. In addition to the retail offering of advanced 2D materials, it offers analytical services, prototype development and consulting.

Located in Calverton NY, Graphene Labs benefits from the unique high tech community on Long Island. Efforts by Graphene Laboratories are supported by Brookhaven National Laboratory, Stony Brook Business Incubator, and the Clean Energy Business Incubator Program (CEBIP), hosted by the New York State Energy Research and Development Authority (NYSERDA).

For more information on Graphene Laboratories, Inc, visit www.graphenelabs.com or contact them at (516)-382-8649 or via email at info@graphenelabs.com

About AERTC

Located in the Research and Development Park on the campus of Stony Brook University, the Advanced Energy Incubator is space that is home to companies within the Advanced Energy Center. The Advanced Energy Center (www.aertc.org) is a true partnership of academic institutions, research institutions, energy providers and companies. Its mission is innovative energy research, education and technology deployment with a focus on efficiency, conservation,renewable energy and nanotechnology applications for new and novel sources of energy.

About Sensor CAT

The New York State Center for Advanced Technology at Stony Brook University provides intellectual, logistical, and material resources for the development of new product technologies – by facilitating R&D partnerships between New York companies with an in-state footprint and university researchers. The important outcomes are new jobs, new patents, training of students in company product matters, and improved competitiveness for New York State businesses.

About Lomiko Metals Inc.

Lomiko Metals Inc. is a Canadian based exploration-stage company. Its mineral properties include the Quatre Milles Graphite Property and the Vines Lake property which both have had recent major discoveries. On October 22 and November, 13 2012, Lomiko Metals Inc. announced 11 drill holes had intercepted high grade graphite at the 3,780 Ha Quatre Milles Property. On March 15, 2013 Lomiko reported 75.3% of graphite tested was >200 mesh and classified as graphite flake with 38.36% in the >80 mesh, large flake category. 85.3% of test results higher than the 94% carbon purity considered high carbon content, with the median test result being 98.35%.

The highlight of Lomiko’s testing was nine (9) sieve samples which captured flakes of varying sizes which tested 100.00% carbon. Both fine and flake material may be amenable to graphene conversion by Lomiko Metals Inc. partner Graphene Laboratories.

The project is located 175 km north of the Port of Montreal and 26 km from a major highway on a well-maintained gravel road.

For more information on Lomiko Metals Inc., review the website at www.lomiko.com or contact A. Paul Gill at 604-729-5312 or email: info@lomiko.com

On Behalf of the Board

“A. Paul Gill” Chief Executive Officer

We seek safe harbor. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

I couldn’t resist that last bit either. As I understand it, this means ‘caveat emptor’ or buyer beware. In short do your research.

Canadian federal government coughs up funds ($1.8M) for ecoEnergy project at the University of Waterloo Institute for Nanotechnology

Stephen Harper, Prime Minister of  Canada, recently announced a series of 32 grants for Natural Resources Canada’s ecoENERGY Innovation Initiative. From the May 3, 2013 announcement,

To this end, on May 3, 2013, Prime Minister Stephen Harper announced support of more than $82 million through Natural Resources Canada’s ecoENERGY Innovation Initiative (ecoEII) for 55 innovative projects across Canada. Of these, 15 will be pre-commercialization demonstration projects to test the feasibility of various technologies, and 40 will be research and development projects to address knowledge gaps and bring technologies from the conceptual stage to the ready-to-be-tested stage of development.

For all projects, funding provided by NRCan will be allocated from the date of signature of contribution agreements until March 31, 2016, the project end date.

Since 2006, the Government of Canada has taken action to reduce greenhouse gas emissions and build a more sustainable environment through more than $10 billion in investments in green infrastructure, energy efficiency, clean energy technologies and the production of cleaner energy and cleaner fuels.

….

High Energy Density Energy Storage for Automotive Applications
Lead Proponent: University of Waterloo
Location: Waterloo, Ontario
Funding: $1,870,000

Today’s electric vehicles are limited by driving range and cost, both of which greatly depend on the electric vehicle’s battery pack. The objective of this project is to develop advanced energy materials based on nanotechnology concepts for high energy density storage.

There’s more about the announcement in a May 14, 2013 news item in the LabCanada.com Daily news,

Led by Professor Linda Nazar of the Faculty of Science and the Waterloo Institute for Nanotechnology at the University of Waterloo, the study will examine completely new approaches to materials and chemical components of batteries that could result in more powerful, and longer-lasting batteries for hybrid electric or electric cars.

“The funding from Natural Resources Canada allows us to expand our electrochemical energy storage laboratory here at Waterloo to explore beyond lithium-ion batteries using nanotechnology and completely different approaches to battery chemistry,” said Professor Nazar, a Canada Research Chair in Solid State Energy Materials. “This research is high-risk, but it has the potential to create batteries with much greater storage capacity and at lower costs.”

Natural Resources Canada (NRCan) is providing $1.8 million over four years to Professor Nazar for her work titled High Energy Density Storage for Automotive Applications.  Partnerships on the project include Hydro-Québec, the Korea Institute of Energy Technology Evaluation and Planning, and BASF (SE).

For anyone who’s interested in Natural Resources Canada’s ecoENERGY Innovation Initiative (ecoEII), here’s the website.

Love, hate, and the whole damn thing affect batteries, semiconductors, and electronic memory

A Jan. 24, 2013 news item on ScienceDaily features love triumphing over hate where tetracationic rings are concerned,

Northwestern University graduate student Jonathan Barnes had a hunch for creating an exotic new chemical compound, and his idea that the force of love is stronger than hate proved correct. He and his colleagues are the first to permanently interlock two identical tetracationic rings that normally are repelled by each other. Many experts had said it couldn’t be done.

On the surface, the rings hate each other because each carries four positive charges (making them tetracationic). But Barnes discovered by introducing radicals (unpaired electrons) onto the scene, the researchers could create a love-hate relationship in which love triumphs.

The Jan. 24, 2013 Northwestern University news release by Megan Fellman, which originated the news item, probes into the nature of the problem and its solution (Note: A link has been removed),

Unpaired electrons want to pair up and be stable, and it turns out the attraction of one ring’s single electrons to the other ring’s single electrons is stronger than the repelling forces.

The process links the rings not by a chemical bond but by a mechanical bond, which, once in place, cannot easily be torn asunder.

The study detailing this new class of stable organic radicals will be published Jan. 25 [2013] by the journal Science.

“It’s not that people have tried and failed to put these two rings together — they just didn’t think it was possible,” said Sir Fraser Stoddart, a senior author of the paper. “Now this molecule has been made. I cannot overemphasize Jonathan’s achievement — it is really outside the box. Now we are excited to see where this new chemistry leads us.”

The rings repel each other like the positive poles of two magnets. Barnes saw an opportunity where he thought he could tweak the chemistry by using radicals to overcome the hate between the two rings.

“We made these rings communicate and love each other under certain conditions, and once they were mechanically interlocked, the bond could not be broken,” Barnes said.

Barnes’ first strategy — adding electrons to temporarily reduce the charge and bring the two rings together — worked the first time he tried it. He, Stoddart and their colleagues started with a full ring and a half ring that they then closed up around the first ring (using some simple chemistry), creating the mechanical bond.

When the compound is oxidized and electrons lost, the strong positive forces come roaring back — “It’s hate on all the time,” Barnes said — but then it is too late for the rings to be parted. “That’s the beauty of this system,” he added.

Most organic radicals possess short lifetimes, but this unusual radical compound is stable in air and water. The compound tucks the electrons away inside the structure so they can’t react with anything in the environment. The tight mechanical bond endures despite the unfavorable electrostatic interactions.

The two interlocked rings house an immense amount of charge in a mere cubic nanometer of space. The compound, a homo[2]catenane, can adopt one of six oxidation states and can accept up to eight electrons in total.

“Anything that accepts this many electrons has possibilities for batteries,” Barnes said.

“Applications beckon,” Stoddart agreed. “Now we need to spend more time with materials scientists and people who make devices to see how this amazing compound can be used.”

For anyone interested in the details of the work, here’s a citation and link to the paper published in Science,

A Radically Configurable Six-State Compound by Jonathan C. Barnes, Albert C. Fahrenbach, Dennis Cao, Scott M. Dyar, Marco Frasconi, Marc A. Giesener, Diego Benítez, Ekaterina Tkatchouk, Oleksandr Chernyashevskyy, Weon Ho Shin, Hao Li, Srinivasan Sampath, Charlotte L. Stern, Amy A. Sarjeant, Karel J. Hartlieb, Zhichang Liu, Raanan Carmieli, Youssry Y. Botros, Jang Wook Choi, Alexandra M. Z. Slawin, John B. Ketterson, Michael R. Wasielewski, William A. Goddard III, J. Fraser Stoddart. Science 25 January 2013: Vol. 339 no. 6118 pp. 429-433 DOI: 10.1126/science.1228429

This is paper is behind a paywall.