Tag Archives: citric acid

Plastic shines with structural colour

Caption: These tangram puzzles are made from a new type of edible cellulose-based plastic with colors provided by tiny nanostructures within the material, rather than dyes. Credit: Adapted from ACS Nano 2025, DOI: 10.1021/acsnano.5c05346

A July 22, 2025 American Chemical Society (ACS) news release (also on EurekAlert) announced new research into one of my favourite topics, structural colour, Note: A link has been removed,

Plastics are one of the largest sources of pollution on Earth, lasting for years on land or in water. But a new type of brilliantly colored cellulose-based plastic detailed in ACS Nano could change that. By adding citric acid and squid ink to a cellulose-based polymer, researchers created a variety of structurally colored plastics that were comparable in strength to traditional plastics, but made from natural biodegradable ingredients and easily recycled using water.

Many plastics are dyed using specialized colorants, which can make these materials hard to recycle using typical processes. Over time, dyes can fade or leach into the environment, posing risks to wildlife. One way to make these colorants largely unnecessary could be a phenomenon called structural color. This occurs when tiny structures in a material reflect certain wavelengths of light rather than a dye or pigment molecule. Structural color gives peacock feathers and butterfly wings their vibrant hues and dazzling shine, but certain synthetic polymers display structural color as well.

Hydroxypropyl cellulose (HPC), a derivative of cellulose often used in foods and pharmaceuticals, is one example of a material that can display structural color. In liquid form, it shines in iridescent tones, but its chemical properties have historically made it difficult to form into a solid plastic. So, Lei Hou, Peiyi Wu and colleagues wanted to see if they could fine-tune the chemistry of HPC to create vibrant, structurally colored plastics that worked as well as existing petroleum-based plastics and were environmentally friendly.

The researchers added citric acid, squid ink powder and water to the HPC polymer, which formed additional hydrogen bonds within the polymer, creating a firm material as it air-dried at room temperature. The dried material’s final hue depended on the amount of citric acid, so the researchers were able to create blue, green, orange and red versions. The final color intensity depended on the amount of squid ink powder present. Next, this liquid formulation was 3D-printed into a variety of shapes, molded into small structures, formed into a thin film and gently folded into pinwheels and origami cranes.

Because the plastics dissolved in water, the original HPC-based plastic could be reformed into new shapes after being dried again. The recycled plastic had mechanical properties that were comparable or superior to those of most commercial, newly manufactured plastics. This work provides an efficient strategy to develop the next-generation of sustainable, dye-free plastics , the researchers say.

The authors acknowledge funding from the Fundamental Research Funds for the Central Universities, the National Natural Science Foundation of China, and the Research Foundation of the National Innovation Center of Advanced Dyeing & Finishing Technology.

Here’s a link to and a citation for the paper,

Edible Structurally Colored Plastics by Xu Ma, Baohu Wu, Lei Hou, Peiyi Wu. ACS Nano 2025, 19, 26, 23945–23954 DOI: https://doi.org/10.1021/acsnano.5c05346 Published June 25, 2025 Copyright © 2025 American Chemical Society

This paper is behind a paywall.

Regrowing bone

The ability to grow bone or bone-like material could change life substantially for people with certain kinds of injuries. Scientists at Northwestern University and the University of Chicago have been able to regrow bone in a skull (according to a March 8, 2017 Northwestern University news release (also on EurekAlert),

A team of researchers repaired a hole in a mouse’s skull by regrowing “quality bone,” a breakthrough that could drastically improve the care of people who suffer severe trauma to the skull or face.

The work by a joint team of Northwestern Engineering and University of Chicago researchers was a resounding success, showing that a potent combination of technologies was able to regenerate the skull bone with supporting blood vessels in just the discrete area needed without developing scar tissue — and more rapidly than with previous methods.

“The results are very exciting,” said Guillermo Ameer, professor of biomedical engineering at Northwestern’s McCormick School of Engineering, and professor of surgery at Feinberg School of Medicine.

Supported by the China Scholarship Council, National Institute of Dental and Craniofacial Research, Chicago Community Trust, and National Center for Advancing Translational Sciences, the research was published last week in the journal PLOS One. Russell Reid, associate professor of surgery at the University of Chicago Medical Center, is the article’s corresponding author. Reid, his long-time collaborator Dr. Tong-Chuan He, and colleagues in Hyde Park brought the surgical and biological knowledge and skills. Zari P. Dumanian, affiliated with the medical center’s surgery department, was the paper’s first author.

“This project was a true collaborative team effort in which our Regenerative Engineering Laboratory provided the biomaterials expertise,” Ameer said.

Injuries or defects in the skull or facial bones are very challenging to treat, often requiring the surgeon to graft bone from the patient’s pelvis, ribs, or elsewhere, a painful procedure in itself. Difficulties increase if the injury area is large or if the graft needs to be contoured to the angle of the jaw or the cranial curve.

But if all goes well with this new approach, it may make painful bone grafting obsolete.

In the experiment, the researchers harvested skull cells from the mouse and engineered them to produce a potent protein to promote bone growth. They then used Ameer’s hydrogel, which acted like a temporary scaffolding, to deliver and contain these cells to the affected area. It was the combination of all three technologies that proved so successful, Ameer said.

Using calvaria or skull cells from the subject meant the body didn’t reject those cells.

The protein, BMP9, has been shown to promote bone cell growth more rapidly than other types of BMPs. Importantly, BMP9 also appeared to improve the creation of blood vessels in the area. Being able to safely deliver skull cells that are capable of rapidly regrowing bone in the affected site, in vivo as opposed to using them to grow bone in the laboratory, which would take a very long time, promises a therapy that might be more “surgeon friendly, if you will, and not too complicated to scale up for the patients,” Ameer said.

The scaffolding developed in Ameer’s laboratory, which is a material based on citric acid and called PPCN-g, is a liquid that when warmed to body temperature becomes a gel-like elastic material. “When applied, the liquid, which contains cells capable of producing bone, will conform to the shape of the bone defect to make a perfect fit,” Ameer said. “It then stays in place as a gel, localizing the cells to the site for the duration of the repair.” As the bone regrows, the PPCN-g is reabsorbed by the body.

“What we found is that these cells make natural-looking bone in the presence of the PPCN-g,” Ameer said. “The new bone is very similar to normal bone in that location.”

In fact, the three-part method was successful on a number of fronts: The regenerated bone was better quality, the bone growth was contained to the area defined by the scaffolding, the area healed much more quickly, and the new and old bone were continuous with no scar tissue.

The potential, if the procedure can be adapted to treat people that suffered trauma from car accidents or aggressive cancers that have affected the skull or face, would be huge, and give surgeons a much-sought-after option.

“The reconstruction procedure is a lot easier when you can harvest a few cells, make them produce the BMP9 protein, mix them in the PPCN-g solution, and apply it to the bone defect site to jump-start the new bone growth process where you want it.” Ameer said.

Ameer cautioned that the technology is years away to being used in humans, but added, “We did show proof of concept that we can heal large defects in the skull that would normally not heal on their own using a protein, cells and a new material that come together in a completely new way. Our team is very excited about these findings and the future of reconstructive surgery.”

Here’s a link and a citation for the paper,

Repair of critical sized cranial defects with BMP9-transduced calvarial cells delivered in a thermoresponsive scaffold by Zari P. Dumanian, Viktor Tollemar, Jixing Ye, Minpeng Lu, Yunxiao Zhu, Junyi Liao, Guillermo A. Ameer, Tong-Chuan He, Russell R. Reid. PLOS http://dx.doi.org/10.1371/journal.pone.0172327 Published: March 1, 2017

This is an open access paper.