Tag Archives: Deshetti Jampaiah

Graphene from gum trees

Caption: Eucalyptus bark extract has never been used to synthesise graphene sheets before. Courtesy: RMIT University

It’s been quite educational reading a June 24, 2019 news item on Nanowerk about deriving graphene from Eucalyptus bark (Note: Links have been removed),

Graphene is the thinnest and strongest material known to humans. It’s also flexible, transparent and conducts heat and electricity 10 times better than copper, making it ideal for anything from flexible nanoelectronics to better fuel cells.

The new approach by researchers from RMIT University (Australia) and the National Institute of Technology, Warangal (India), uses Eucalyptus bark extract and is cheaper and more sustainable than current synthesis methods (ACS Sustainable Chemistry & Engineering, “Novel and Highly Efficient Strategy for the Green Synthesis of Soluble Graphene by Aqueous Polyphenol Extracts of Eucalyptus Bark and Its Applications in High-Performance Supercapacitors”).

A June 24, 2019 RMIT University news release (also on EurekAlert), which originated the news item, provides a little more detail,

RMIT lead researcher, Distinguished Professor Suresh Bhargava, said the new method could reduce the cost of production from $USD100 per gram to a staggering $USD0.5 per gram.

“Eucalyptus bark extract has never been used to synthesise graphene sheets before and we are thrilled to find that it not only works, it’s in fact a superior method, both in terms of safety and overall cost,” said Bhargava.

“Our approach could bring down the cost of making graphene from around $USD100 per gram to just 50 cents, increasing it availability to industries globally and enabling the development of an array of vital new technologies.”

Graphene’s distinctive features make it a transformative material that could be used in the development of flexible electronics, more powerful computer chips and better solar panels, water filters and bio-sensors.

Professor Vishnu Shanker from the National Institute of Technology, Warangal, said the ‘green’ chemistry avoided the use of toxic reagents, potentially opening the door to the application of graphene not only for electronic devices but also biocompatible materials.

“Working collaboratively with RMIT’s Centre for Advanced Materials and Industrial Chemistry we’re harnessing the power of collective intelligence to make these discoveries,” he said.

A novel approach to graphene synthesis:

Chemical reduction is the most common method for synthesising graphene oxide as it allows for the production of graphene at a low cost in bulk quantities.

This method however relies on reducing agents that are dangerous to both people and the environment.

When tested in the application of a supercapacitor, the ‘green’ graphene produced using this method matched the quality and performance characteristics of traditionally-produced graphene without the toxic reagents.

Bhargava said the abundance of eucalyptus trees in Australia made it a cheap and accessible resource for producing graphene locally.

“Graphene is a remarkable material with great potential in many applications due to its chemical and physical properties and there’s a growing demand for economical and environmentally friendly large-scale production,” he said.

Here’s a link to and a citation for the paper,

Novel and Highly Efficient Strategy for the Green Synthesis of Soluble Graphene by Aqueous Polyphenol Extracts of Eucalyptus Bark and Its Applications in High-Performance Supercapacitors by Saikumar ManchalaV. S. R. K. Tandava, Deshetti Jampaiah, Suresh K. Bhargava, Vishnu Shanker. ACS Sustainable Chem. Eng.2019XXXXXXXXXX-XXX DOI: https://doi.org/10.1021/acssuschemeng.9b01506 Publication Date:June 13, 2019

Copyright © 2019 American Chemical Society

This paper is behind a paywall.

Real-time tracking of UV (ultraviolet light) exposure for all skin types (light to dark)

It’s nice to find this research after my August 21, 2018 posting where I highlighted (scroll down to ‘Final comments’) the issues around databases and skin cancer data which is usually derived from fair-skinned people while people with darker hues tend not to be included. This is partly due to the fact that fair-skinned people have a higher risk and also partly due to myths about how more melanin in your skin somehow protects you from skin cancer.

This October 4, 2018 news item on ScienceDaily announces research into a way to track UV exposure for all skin types,

Researchers from the University of Granada [Spain] and RMIT University in Melbourne [Australia] have developed personalised and low-cost wearable ultraviolet (UV) sensors that warn users when their exposure to the sun has become dangerous.

The paper-based sensor, which can be worn as a wristband, features happy and sad emoticon faces — drawn in an invisible UV-sensitive ink — that successively light up as you reach 25%, 50%, 75% and finally 100% of your daily recommended UV exposure.

The research team have also created six versions of the colour-changing wristbands, each of which is personalised for a specific skin tone  [emphasis mine]– an important characteristic given that darker people need more sun exposure to produce vitamin D, which is essential for healthy bones, teeth and muscles.

An October 2, 2018 University of Granada press release (also on EurekAlert) delves further,

Four of the wristbands, each of which indicates a different stage of exposure to UV radiation (25%, 50%, 75% and 100%)

The emoticon faces on the wristband successively “light up” as exposure to UV radiation increases

Skin cancer, one of the most common types of cancer throughout the world, is primarily caused by overexposure to ultraviolet radiation (UVR). In Spain, over 74,000 people are diagnosed with non-melanoma skin cancer every year, while a further 4,000 are diagnosed with melanoma skin cancer. In regions such as Australia, where the ozone layer has been substantially depleted, it is estimated that approximately 2 in 3 people will be diagnosed with skin cancer by the time they reach the age of 70.

“UVB and UVC radiation is retained by the ozone layer. This sensor is especially important in the current context, given that the hole in the ozone layer is exposing us to such dangerous radiation”, explains José Manuel Domínguez Vera, a researcher at the University of Granada’s Department of Inorganic Chemistry and the main author of the paper.

Domínguez Vera also highlights that other sensors currently available on the market only measure overall UV radiation, without distinguishing between UVA, UVB and UVC, each of which has a significantly different impact on human health.  In contrast, the new paper-based sensor can differentiate between UVA, UVB and UVC radiation. Prolonged exposure to UVA radiation is associated with skin ageing and wrinkling, while excessive exposure to UVB causes sunburn and increases the likelihood of skin cancer and eye damage.

Drawbacks of the traditional UV index

Ultraviolet radiation is determined by aspects such as location, time of day, pollution levels, astronomical factors, weather conditions such as clouds, and can be heightened by reflective surfaces like bodies of water, sand and snow. But UV rays are not visible to the human eye (even if it is cloudy UV radiation can be high) and until now the only way of monitoring UV intensity has been to use the UV index, which is standardly given in weather reports and indicates 5 degrees of radiation;  low, moderate, high, very high or extreme.

Despite its usefulness, the UV index is a relatively limited tool. For instance, it does not clearly indicate what time of the day or for how long you should be outside to get your essential vitamin D dose, or when to cover up to avoid sunburn and a heightened risk of skin cancer.

Moreover, the UV index is normally based on calculations for fair skin, making it unsuitable for ethnically diverse populations.  While individuals with fairer skin are more susceptible to UV damage, those with darker skin require much longer periods in the sun in order to absorb healthy amounts of vitamin D. In this regard, the UV index is not an accurate tool for gauging and monitoring an individual’s recommended daily exposure.

UV-sensitive ink

The research team set out to tackle the drawbacks of the traditional UV index by developing an inexpensive, disposable and personalised sensor that allows the wearer to track their UV exposure in real-time. The sensor paper they created features a special ink, containing phosphomolybdic acid (PMA), which turns from colourless to blue when exposed to UV radiation. They can use the initially-invisible ink to draw faces—or any other design—on paper and other surfaces. Depending on the type and intensity of the UV radiation to which the ink is exposed, the paper begins to turn blue; the greater the exposure to UV radiation, the faster the paper turns blue.

Additionally, by tweaking the ink composition and the sensor design, the team were able to make the ink change colour faster or slower, allowing them to produce different sensors that are tailored to the six different types of skin colour. [emphasis mine]

Applications beyond health

This low-cost, paper-based sensor technology will not only help people of all colours to strike an optimum balance between absorbing enough vitamin D and avoiding sun damage — it also has significant applications for the agricultural and industrial sectors. UV rays affect the growth of crops and the shelf life of a range of consumer products. As the UV sensors can detect even the slightest doses of UV radiation, as well as the most extreme, this new technology could have vast potential for industries and companies seeking to evaluate the prolonged impact of UV exposure on products that are cultivated or kept outdoors.

The research project is the result of fruitful collaborations between two members of the UGR BIONanoMet (FQM368) research group; Ana González and José Manuel Domínguez-Vera, and the research group led by Dr. Vipul Bansal at RMIT University in Melbourne (Australia).

Here’s a link to and a citation for the paper,

Skin color-specific and spectrally-selective naked-eye dosimetry of UVA, B and C radiations by Wenyue Zou, Ana González, Deshetti Jampaiah, Rajesh Ramanathan, Mohammad Taha, Sumeet Walia, Sharath Sriram, Madhu Bhaskaran, José M. Dominguez-Vera, & Vipul Bansal. Nature Communicationsvolume 9, Article number: 3743 (2018) DOI: https://doi.org/10.1038/s41467-018-06273-3 Published 25 September 2018

This paper is open access.