Tag Archives: Dr. Zoë Schnepp

Come fly with me! Max Planck Institute researchers turn origami paper crane into a conductive structure

Yet again the lowly inkjet printer features in a very high tech project. This time, the printer has been used to print a catalyst on paper that is then turned into conductive graphite. From the May 15, 2013 news item on ScienceDaily,

… Researchers at the Max Planck Institute of Colloids and Interfaces in Potsdam-Golm have created targeted conductive structures on paper using a method that is quite simple: with a conventional inkjet printer, they printed a catalyst on a sheet of paper and then heated it. The printed areas on the paper were thereby converted into conductive graphite. Being an inexpensive, light and flexible raw material, paper is therefore highly suitable for electronic components in everyday objects.

Cost-efficient and flexible microchips are opening up applications in the electronics sector for which silicon chips are too expensive or difficult to make, and for which RFID chips, now available on a widespread basis, simply do not suffice: clothes, for instance, that monitor bodily functions, flexible screens, or labels that give more information about a product then can be printed on the packaging.

The Max Planck Institute of Colloids and Interfaces May 8, 2013 news release, which originated the news item, offers more detail about the advantages that conductive ‘paper’ offers,

Although many scientists around the world are successfully developing flexible chips, they have been forced to almost always rely on plastics as the carrier and, in some cases, use polymers and other organic molecules as conductive components. These materials may meet many requirements; however, they are all, without exception, sensitive to heat. “Their processing cannot be integrated into the usual production of electronics, because temperatures in production can reach over 400 degrees Celsius,” says Cristina Giordano, who leads a working group at the Max Planck Institute of Colloids and Interfaces and as now come up with an alternative solution.

Carbon electronics, which Giordano and her colleagues create from paper, can withstand temperatures of around 800 degrees Celsius during production in an oxygen-free environment, and would not have a negative impact on established processes. And that is not the only trump card of paper-based electronics. The light and inexpensive material can be processed very easily, even into three-dimensional conductive structures.

Here’s how the scientists achieved their conductive ‘paper’,

The Potsdam-based researchers convert the cellulose of the paper into graphite with iron nitrate serving as the catalyst. “Using a commercial inkjet printer, we print  a solution of the catalyst in a fine pattern on a sheet of paper,” says Stefan Glatzel, who is responsible for bringing electronics to paper in his doctoral thesis. If the researchers then heat the sheets that were printed with a catalyst to 800 degrees Celsius in a nitrogen atmosphere, the cellulose will continue to release water until all that remains is pure carbon. Whereas an electrically conducting mixture of regularly structured carbon sheets of graphite and iron carbide forms in the printed areas, the non-printed areas are left behind as carbon without a regular structure, and they are less conductive.

That actual, precisely formed conducting paths are created in this way was demonstrated by the researchers in a simple experiment: First, they printed the catalyst on a sheet of paper in the pattern of Minerva, the subtle symbol of the Max Planck Society. The printed pattern was then converted into graphite. They then used the graphite Minerva as a cathode, which was electrolytically coated with copper. The metal was only deposited on the lines sketched by the printer.

My personal favourite is the scientists’ origami crane experiment,

In another experiment, the team in Potsdam demonstrated how three-dimensional, conductive structures can be created using their method. For this experiment, the team folded a sheet of paper into an origami crane. This was then immersed in the catalyst and baked into graphite. “The three-dimensional form was completely retained, but consisted entirely of conductive carbon after the process,” says Stefan Glatzel. He demonstrated this again by electrolytically coating the origami bird with copper. The entire crane subsequently had a copper sheen.

An origami figure takes flight: A crane made from folded paper is immersed in the ferric catalyst (left) by the Max Planck researchers in Potsdam. After the conversion, all that remains besides graphite is magnetic iron carbide, which allows the bird to fly towards the magnets (centre). The picture of a transmission electron microscope reveals the nanostructure of the carbon (right). © MPI of Colloids and Interfaces

An origami figure takes flight: A crane made from folded paper is immersed in the ferric catalyst (left) by the Max Planck researchers in Potsdam. After the conversion, all that remains besides graphite is magnetic iron carbide, which allows the bird to fly towards the magnets (centre). The picture of a transmission electron microscope reveals the nanostructure of the carbon (right).
© MPI of Colloids and Interfaces

Interested parties can find more information at ScienceDaily (May 15, 2013 news item) or here at the Max Planck Institute of Colloids and Interfaces website. For the truly keen, here’s a link to and a citation for the published study,

From Paper to Structured Carbon Electrodes by Inkjet Printing by Stefan Glatzel1, Dr. Zoë Schnepp, and Dr. Cristina Giordano. Angewandte Chemie International Edition, Volume 52, Issue 8, pages 2355–2358, February 18, 2013 Article first published online: 17 JAN 2013
DOI: 10.1002/anie.201207693

This paper is behind a paywall.