Tag Archives: green nanotechnology

A review of the nanotechnology in green technology

Leave a reply

Michael Berger has written a Nov. 18, 2014 Nanowerk Spotlight article focusing on the ‘green’ in nanotechnology (Note: A link has been removed),

There is a general perception that nanotechnologies will have a significant impact on developing ‘green’ and ‘clean’ technologies with considerable environmental benefits. The associated concept of green nanotechnology aims to exploit nanotech-enabled innovations in materials science and engineering to generate products and processes that are energy efficient as well as economically and environmentally sustainable. These applications are expected to impact a large range of economic sectors, such as energy production and storage, clean up-technologies, as well as construction and related infrastructure industries.

A recent review article in Environmental Health (“Opportunities and challenges of nanotechnology in the green economy”) examines opportunities and practical challenges that nanotechnology applications pose in addressing the guiding principles for a green economy.

Here’s a link to and citation for the review article cited by Berger. It is more focused on occupational health and safety then the title suggests but not surprising when you realize all of the authors are employed by the US National Institute of Occupational Safety and Health (NIOSH),,

Opportunities and challenges of nanotechnology in the green economy by Ivo Iavicoli, Veruscka Leso, Walter Ricciard, Laura L Hodson, and Mark D Hoover. Environmental Health 2014, 13:78 doi:10.1186/1476-069X-13-78 Published:    7 October 2014

© 2014 Iavicoli et al.; licensee BioMed Central Ltd.

This is an open access article.

Here’s the background to the work (from the article; Note: Links have been removed),

The “green economy” concept has been driven into the mainstream of policy debate by global economic crisis, expected increase in global demand for energy by more than one third between 2010 to 2035, rising commodity prices as well as the urgent need for addressing global challenges in domains such as energy, environment and health [1-3].

The term “green economy”, chiefly relating to the principles of sustainable development, was first coined in a pioneering 1989 report for the Government of the United Kingdom by a group of leading environmental economists [1]. The most widely used and reliable definition of “green economy” comes from the United Nations Environment Programme which states that “a green economy is one that results in improved human well-being and social equity, while significantly reducing environmental risks and ecological scarcities. It is low carbon, resource efficient, and socially inclusive” [4].

…

The green economy concept can indeed play a very useful role in changing the way that society manages the interaction of the environmental and economic domains. In this context, nanotechnology, which is the manipulation of matter in the dimension of 1 to 100 nm, offers the opportunity to produce new structures, materials and devices with unique physico-chemical properties (i.e. small size, large surface area to mass ratio) to be employed in energy efficient as well as economically and environmentally sustainable green innovations [8-12].

Although expected to exert a great impact on a large range of industrial and economic sectors, the sustainability of green nano-solutions is currently not completely clear, and it should be carefully faced. In fact, the benefits of incorporating nanomaterials (NMs) in processes and products that contribute to outcomes of sustainability, might bring with them environmental, health and safety risks, ethical and social issues, market and consumer acceptance uncertainty as well as a strong competition with traditional technologies [13].

The present review examines opportunities and practical challenges that nano-applications pose in addressing the guiding principles for a green economy. Examples are provided of the potential for nano-applications to address social and environmental challenges, particularly in energy production and storage thus reducing pressure on raw materials, clean-up technologies as well as in fostering sustainable manufactured products. Moreover, the review aims to critically assess the impact that green nanotechnology may have on the health and safety of workers involved in this innovative sector and proposes action strategies for the management of emerging occupational risks.

The potential nanotechnology impact on green innovations

Green nanotechnology is expected to play a fundamental role in bringing a key functionality across the whole value chain of a product, both through the beneficial properties of NMs included as a small percentage in a final device, as well as through nano-enabled processes and applications without final products containing any NMs [13,14]. However, most of the potential green nano-solutions are still in the lab/start-up phase and very few products have reached the market to date. Further studies are necessary to assess the applicability, efficiency and sustainability of nanotechnologies under more realistic conditions, as well as to validate NM enabled systems in comparison to existing technologies. The following paragraphs will describe the potential fields of application for green nanotechnology innovations.

Intriguingly, there’s no mention (that I could find) of soil remediation (clean-up) although there is reference to water remediation.  As for occupational health and safety and nanotechnology, the authors have this to say (Note: Links have been removed),

In this context according to the proposed principles for green economy, it is important that society, scientific community and industry take advantage of opportunities of nanotechnology while overcoming its practical challenges. However, not all revolutionary changes are sustainable per se and a cautious assessment of the benefits addressing economic, social and environmental implications, as well as the occupational health and safety impact is essential [95,96]. This latter aspect, in particular, should be carefully addressed, in consideration of the expected widespread use of nanotechnology and the consequent increasing likelihood of NM exposure in both living and occupational environments. Moreover, difficulties in nano-manufacturing and handling; uncertainty concerning stability of nano-innovations under aggressive or long-term operation (i.e. in the case of supercapacitors with nano-structured electrode materials or nano-enabled construction products); the lack of information regarding the release and fate of NMs in the environment (i.e. NMs released from water and wastewater treatment devices) as well as the limited knowledge concerning the NM toxicological profile, even further support the need for a careful consideration of the health and safety risks derived from NM exposure.Importantly, as shown in Figure 1, a number of potentially hazardous exposure conditions can be expected for workers involved in nanotechnology activities. In fact, NMs may have significant, still unknown, hazards that can pose risks for a wide range of workers: researchers, laboratory technicians, cleaners, production workers, transportation, storage and retail workers, employees in disposal and waste facilities and potentially, emergency responders who deal with spills and disasters of NMs who may be differently exposed to these potential, innovative xenobiotics.

The review article is quite interesting, albeit its precaution-heavy approach, but if you don’t have time, Berger summarizes the article. He also provides links to related articles he has written on the subjects of energy storage, evaluating ‘green’ nanotechnology in a full life cycle assessment, and more.

Nanotechnology’s economic impacts and full lifecycle assessments

3 Replies

A paper presented at the International Symposium on Assessing the Economic Impact of Nanotechnology, held March 27 – 28, 2012 in Washington, D.C advises that assessments of the economic impacts of nanotechnology need to be more inclusive. From the March 28, 2012 news item on Nanowerk,

“Nanotechnology promises to foster green and sustainable growth in many product and process areas,” said Shapira [Philip Shapira], a professor with Georgia Tech’s [US]  School of Public Policy and the Manchester Institute of Innovation Research at the Manchester Business School in the United Kingdom. “Although nanotechnology commercialization is still in its early phases, we need now to get a better sense of what markets will grow and how new nanotechnology products will impact sustainability. This includes balancing gains in efficiency and performance against the net energy, environmental, carbon and other costs associated with the production, use and end-of-life disposal or recycling of nanotechnology products.”

But because nanotechnology underlies many different industries, assessing and forecasting its impact won’t be easy. “Compared to information technology and biotechnology, for example, nanotechnology has more of the characteristics of a general technology such as the development of electric power,” said Youtie [Jan Youtie], director of policy research services at Georgia Tech’s Enterprise Innovation Institute. “That makes it difficult to analyze the value of products and processes that are enabled by the technology. We hope that our paper will provide background information and help frame the discussion about making those assessments.”

From the March 27, 2012 Georgia Institute of Technology news release,

For their paper, co-authors Shapira and Youtie examined a subset of green nanotechnologies that aim to enable sustainable energy, improve environmental quality, and provide healthy drinking water for areas of the world that now lack it. They argue that the lifecycle of nanotechnology products must be included in the assessment.

I was hoping for a bit more detail about how one would go about including nanotechnology-enabled products in this type of economic impact assessment but this is all I could find (from the news release),

In their paper, Youtie and Shapira cite several examples of green nanotechnology, discuss the potential impacts of the technology, and review forecasts that have been made. Examples of green nanotechnology they cite include:

  • Nano-enabled solar cells that use lower-cost organic materials, as opposed to current photovoltaic technologies that require rare materials such as platinum;
  • Nanogenerators that use piezoelectric materials such as zinc oxide nanowires to convert human movement into energy;
  • Energy storage applications in which nanotechnology materials improve existing batteries and nano-enabled fuel cells;
  • Thermal energy applications, such as nano-enabled insulation;
  • Fuel catalysis in which nanoparticles improve the production and refining of fuels and reduce emissions from automobiles;
  • Technologies used to provide safe drinking water through improved water treatment, desalination and reuse.

I checked both Philip Shapira‘s webpage and Jan Youtie‘s at Georgia Tech to find that neither lists this latest work, which hopefully includes additional detail. I’m hopeful there’ll be a document published in the proceedings for this symposium and access will be possible.

On another note, I did mention this symposium in my Jan. 27, 2012 posting where I speculated about the Canadian participation. I did get a response (March 5, 2012)  from Vanessa Clive, Nanotechnology File, Industry Sector, Industry Canada who kindly cleared up my confusion,

A colleague forwarded the extract from your blog below. Thank you for your interest in the OECD Working Party on Nanotechnology (WPN) work, and giving some additional public profile to its work is welcome. However, some correction is needed, please, to keep the record straight.

“It’s a lot to infer from a list of speakers but I’m going to do it anyway. Given that the only Canadian listed as an invited speaker for a prestigious (OECD/AAAS/NNI as hosts) symposium about nanotechnology’s economic impacts, is someone strongly associated with NCC, it would seem to confirm that Canadians do have an important R&D (research and development) lead in an area of international interest.

One thing about this symposium does surprise and that’s the absence of Vanessa Clive from Industry Canada. She co-authored the OECD’s 2010 report, The Impacts of Nanotechnology on Companies: Policy Insights from Case Studies and would seem a natural choice as one of the speakers on the economic impacts that nanotechnology might have in the future.”

I am a member of the organizing committee, on the OECD WPN side, for the Washington Symposium in March which will focus on the need and, in turn, options for development of metrics for evaluation of the economic impacts of nano. As committee member, I was actively involved in identifying potential Canadian speakers for agenda slots. Apart from the co-sponsors whose generosity made the event possible, countries were limited to one or two speakers in order to bring in experts from as many interested countries as possible. The second Canadian expert which we had invited to participate had to pull out, unfortunately.

Also, the OECD project on nano impacts on business was co-designed and co-led by me, another colleague here at the time, and our Swiss colleague, but the report itself was written by OECD staff.

I did send (March 5, 2012)  a followup email with more questions but I gather time was tight as I’ve not heard back.

In any event, I’m looking forward to hearing more about this symposium, however that occurs, in the coming weeks and months.