Tag Archives: Khalifa University of Science and Technology

Graphene goes to the moon

Leave a reply

The people behind the European Union’s Graphene Flagship programme (if you need a brief explanation, keep scrolling down to the “What is the Graphene Flagship?” subhead) and the United Arab Emirates have got to be very excited about the announcement made in a November 29, 2022 news item on Nanowerk, Note: Canadians too have reason to be excited as of April 3, 2023 when it was announced that Canadian astronaut Jeremy Hansen was selected to be part of the team on NASA’s [US National Aeronautics and Space Administration] Artemis II to orbit the moon (April 3, 2023 CBC news online article by Nicole Mortillaro) ·

Graphene Flagship Partners University of Cambridge (UK) and Université Libre de Bruxelles (ULB, Belgium) paired up with the Mohammed bin Rashid Space Centre (MBRSC, United Arab Emirates), and the European Space Agency (ESA) to test graphene on the Moon. This joint effort sees the involvement of many international partners, such as Airbus Defense and Space, Khalifa University, Massachusetts Institute of Technology, Technische Universität Dortmund, University of Oslo, and Tohoku University.

The Rashid rover is planned to be launched on 30 November 2022 [Note: the launch appears to have occurred on December 11, 2022; keep scrolling for more about that] from Cape Canaveral in Florida and will land on a geologically rich and, as yet, only remotely explored area on the Moon’s nearside – the side that always faces the Earth. During one lunar day, equivalent to approximately 14 days on Earth, Rashid will move on the lunar surface investigating interesting geological features.

…

A November 29, 2022 Graphene Flagship press release (also on EurekAlert), which originated the news item, provides more details,

The Rashid rover wheels will be used for repeated exposure of different materials to the lunar surface. As part of this Material Adhesion and abrasion Detection experiment, graphene-based composites on the rover wheels will be used to understand if they can protect spacecraft against the harsh conditions on the Moon, and especially against regolith (also known as ‘lunar dust’).

Regolith is made of extremely sharp, tiny and sticky grains and, since the Apollo missions, it has been one of the biggest challenges lunar missions have had to overcome. Regolith is responsible for mechanical and electrostatic damage to equipment, and is therefore also hazardous for astronauts. It clogs spacesuits’ joints, obscures visors, erodes spacesuits and protective layers, and is a potential health hazard.  

University of Cambridge researchers from the Cambridge Graphene Centre produced graphene/polyether ether ketone (PEEK) composites. The interaction of these composites with the Moon regolith (soil) will be investigated. The samples will be monitored via an optical camera, which will record footage throughout the mission. ULB researchers will gather information during the mission and suggest adjustments to the path and orientation of the rover. Images obtained will be used to study the effects of the Moon environment and the regolith abrasive stresses on the samples.

This moon mission comes soon after the ESA announcement of the 2022 class of astronauts, including the Graphene Flagship’s own Meganne Christian, a researcher at Graphene Flagship Partner the Institute of Microelectronics and Microsystems (IMM) at the National Research Council of Italy.

“Being able to follow the Moon rover’s progress in real time will enable us to track how the lunar environment impacts various types of graphene-polymer composites, thereby allowing us to infer which of them is most resilient under such conditions. This will enhance our understanding of how graphene-based composites could be used in the construction of future lunar surface vessels,” says Sara Almaeeni, MBRSC science team lead, who designed Rashid’s communication system.

“New materials such as graphene have the potential to be game changers in space exploration. In combination with the resources available on the Moon, advanced materials will enable radiation protection, electronics shielding and mechanical resistance to the harshness of the Moon’s environment. The Rashid rover will be the first opportunity to gather data on the behavior of graphene composites within a lunar environment,” says Carlo Iorio, Graphene Flagship Space Champion, from ULB.

Leading up to the Moon mission, a variety of inks containing graphene and related materials, such as conducting graphene, insulating hexagonal boron nitride and graphene oxide, semiconducting molybdenum disulfide, prepared by the University of Cambridge and ULB were also tested on the MAterials Science Experiment Rocket 15 (MASER 15) mission, successfully launched on the 23rd of November 2022 from the Esrange Space Center in Sweden. This experiment, named ARLES-2 (Advanced Research on Liquid Evaporation in Space) and supported by European and UK space agencies (ESA, UKSA) included contributions from Graphene Flagship Partners University of Cambridge (UK), University of Pisa (Italy) and Trinity College Dublin (Ireland), with many international collaborators, including Aix-Marseille University (France), Technische Universität Darmstadt (Germany), York University (Canada), Université de Liège (Belgium), University of Edinburgh and Loughborough.

This experiment will provide new information about the printing of GMR inks in weightless conditions, contributing to the development of new addictive manufacturing procedures in space such as 3d printing. Such procedures are key for space exploration, during which replacement components are often needed, and could be manufactured from functional inks.

“Our experiments on graphene and related materials deposition in microgravity pave the way addictive manufacturing in space. The study of the interaction of Moon regolith with graphene composites will address some key challenges brought about by the harsh lunar environment,” says Yarjan Abdul Samad, from the Universities of Cambridge and Khalifa, who prepared the samples and coordinated the interactions with the United Arab Emirates.    

“The Graphene Flagship is spearheading the investigation of graphene and related materials (GRMs) for space applications. In November 2022, we had the first member of the Graphene Flagship appointed to the ESA astronaut class. We saw the launch of a sounding rocket to test printing of a variety of GRMs in zero gravity conditions, and the launch of a lunar rover that will test the interaction of graphene—based composites with the Moon surface. Composites, coatings and foams based on GRMs have been at the core of the Graphene Flagship investigations since its beginning. It is thus quite telling that, leading up to the Flagship’s 10th anniversary, these innovative materials are now to be tested on the lunar surface. This is timely, given the ongoing effort to bring astronauts back to the Moon, with the aim of building lunar settlements. When combined with polymers, GRMs can tailor the mechanical, thermal, electrical properties of then host matrices. These pioneering experiments could pave the way for widespread adoption of GRM-enhanced materials for space exploration,” says Andrea Ferrari, Science and Technology Officer and Chair of the Management Panel of the Graphene Flagship. 

Caption: The MASER15 launch Credit: John-Charles Dupin

A pioneering graphene work and a first for the Arab World

A December 11, 2022 news item on Alarabiya news (and on CNN) describes the ‘graphene’ launch which was also marked the Arab World’s first mission to the moon,

The United Arab Emirates’ Rashid Rover – the Arab world’s first mission to the Moon – was launched on Sunday [December 11, 2022], the Mohammed bin Rashid Space Center (MBRSC) announced on its official Twitter account.

The launch came after it was previously postponed for “pre-flight checkouts.”

The launch of a SpaceX Falcon 9 rocket carrying the UAE’s Rashid rover successfully took off from Cape Canaveral, Florida.

…

The Rashid rover – built by Emirati engineers from the UAE’s Mohammed bin Rashid Space Center (MBRSC) – is to be sent to regions of the Moon unexplored by humans.

What is the Graphene Flagship?

In 2013, the Graphene Flagship was chosen as one of two FET (Future and Emerging Technologies) funding projects (the other being the Human Brain Project) each receiving €1 billion to be paid out over 10 years. In effect, it’s a science funding programme specifically focused on research, development, and commercialization of graphene (a two-dimensional [it has length and width but no depth] material made of carbon atoms).

You can find out more about the flagship and about graphene here.

Memristors at Masdar

Leave a reply

The Masdar Institute of Science and Technology (Abu Dhabi, United Arab Emirates; Masdar Institute Wikipedia entry) featured its work with memristors in an Oct. 1, 2017 Masdar Institute press release by Erica Solomon (for anyone who’s interested, I have a simple description of memristors and links to more posts about them after the press release),

Researchers Develop New Memristor Prototype Capable of Performing Complex Operations at High-Speed and Low Power, Could Lead to Advancements in Internet of Things, Portable Healthcare Sensing and other Embedded Technologies

Computer circuits in development at the Khalifa University of Science and Technology could make future computers much more compact, efficient and powerful thanks to advancements being made in memory technologies that combine processing and memory storage functions into one densely packed “memristor.”

Enabling faster, smaller and ultra-low-power computers with memristors could have a big impact on embedded technologies, which enable Internet of Things (IoT), artificial intelligence, and portable healthcare sensing systems, says Dr. Baker Mohammad, Associate Professor of Electrical and Computer Engineering. Dr. Mohammad co-authored a book on memristor technologies, which has just been released by Springer, a leading global scientific publisher of books and journals, with Class of 2017 PhD graduate Heba Abunahla. The book, titled Memristor Technology: Synthesis and Modeling for Sensing and Security Applications, provides readers with a single-source guide to fabricate, characterize and model memristor devices for sensing applications.

The pair also contributed to a paper on memristor research that was published in IEEE Transactions on Circuits and Systems I: Regular Papers earlier this month with Class of 2017 MSc graduate Muath Abu Lebdeh and Dr. Mahmoud Al-Qutayri, Professor of Electrical and Computer Engineering.PhD student Yasmin Halawani is also an active member of Dr. Mohammad’s research team.

Conventional computers rely on energy and time-consuming processes to move information back and forth between the computer central processing unit (CPU) and the memory, which are separately located. A memristor, which is an electrical resistor that remembers how much current flows through it, can bridge the gap between computation and storage. Instead of fetching data from the memory and sending that data to the CPU where it is then processed, memristors have the potential to store and process data simultaneously.

“Memristors allow computers to perform many operations at the same time without having to move data around, thereby reducing latency, energy requirements, costs and chip size,” Dr. Mohammad explained. “We are focused on extending the logic gate design of the current memristor architecture with one that leads to even greater reduction of latency, energy dissipation and size.”

Logic gates control an electronics logical operation on one or more binary inputs and typically produce a single binary output. That is why they are at the heart of what makes a computer work, allowing a CPU to carry out a given set of instructions, which are received as electrical signals, using one or a combination of the seven basic logical operations: AND, OR, NOT, XOR, XNOR, NAND and NOR.

The team’s latest work is aimed at advancing a memristor’s ability to perform a complex logic operation, known as the XNOR (Exclusive NOR) logic gate function, which is the most complex logic gate operation among the seven basic logic gates types.

Designing memristive logic gates is difficult, as they require that each electrical input and output be in the form of electrical resistance rather than electrical voltage.

“However, we were able to successfully design an XNOR logic gate prototype with a novel structure, by layering bipolar and unipolar memristor types in a novel heterogeneous structure, which led to a reduction in latency and energy consumption for a memristive XNOR logic circuit gate by 50% compared to state-of the art state full logic proposed by leading research institutes,” Dr. Mohammad revealed.

The team’s current work builds on five years of research in the field of memristors, which is expected to reach a market value of US$384 million by 2025, according to a recent report from Research and Markets. Up to now, the team has fabricated and characterized several memristor prototypes, assessing how different design structures influence efficiency and inform potential applications. Some innovative memristor technology applications the team discovered include machine vision, radiation sensing and diabetes detection. Two patents have already been issued by the US Patents and Trademark Office (USPTO) for novel memristor designs invented by the team, with two additional patents pending.

Their robust research efforts have also led to the publication of several papers on the technology in high impact journals, including The Journal of Physical Chemistry, Materials Chemistry and Physics, and IEEE TCAS. This strong technology base paved the way for undergraduate senior students Reem Aldahmani, Amani Alshkeili, and Reem Jassem Jaffar to build novel and efficient memristive sensing prototypes.

The memristor research is also set to get an additional boost thanks to the new University merger, which Dr. Mohammad believes could help expedite the team’s research and development efforts through convenient and continuous access to the wider range of specialized facilities and tools the new university has on offer.

The team’s prototype memristors are now in the laboratory prototype stage, and Dr. Mohammad plans to initiate discussions for internal partnership opportunities with the Khalifa University Robotics Institute, followed by external collaboration with leading semiconductor companies such as Abu Dhabi-owned GlobalFoundries, to accelerate the transfer of his team’s technology to the market.

With initial positive findings and the promise of further development through the University’s enhanced portfolio of research facilities, this project is a perfect demonstration of how the Khalifa University of Science and Technology is pushing the envelope of electronics and semiconductor technologies to help transform Abu Dhabi into a high-tech hub for research and entrepreneurship.

h/t Oct. 4, 2017 Nanowerk news item

Slightly restating it from the press release, a memristor is a nanoscale electrical component which mimics neural plasticity. Memristor combines the word ‘memory’ with ‘resistor’.

For those who’d like a little more, there are three components: capacitors, inductors, and resistors which make up an electrical circuit. The resistor is the circuit element which represents the resistance to the flow of electric current.  As for how this relates to the memristor (from the Memristor Wikipedia entry; Note: Links have been removed),

The memristor’s electrical resistance is not constant but depends on the history of current that had previously flowed through the device, i.e., its present resistance depends on how much electric charge has flowed in what direction through it in the past; the device remembers its history — the so-called non-volatility property.[2] When the electric power supply is turned off, the memristor remembers its most recent resistance until it is turned on again

The memristor could lead to more energy-saving devices but much of the current (pun noted) interest lies in its similarity to neural plasticity and its potential application on neuromorphic engineering (brainlike computing).

Here’s a sampling of some of the more recent memristor postings on this blog:

August 24, 2017: Neuristors and brainlike computing

June 28, 2017: Dr. Wei Lu and bio-inspired ‘memristor’ chips

May 2, 2017: Predicting how a memristor functions

December 30, 2016: Changing synaptic connectivity with a memristor

December 5, 2016: The memristor as computing device

November 1, 2016: The memristor as the ‘missing link’ in bioelectronic medicine?

You can find more by using ‘memristor’ as the search term in the blog search function or on the search engine of your choice.