Tag Archives: Northwestern Polytechnical University (China)

Preserving stone and repairing historic Church of the Scalzi in Venice (Italy) with nanotechnology

Leave a reply

Since stone wear down and away with time these researchers from China and Italy are trying to find ways to mitigate the damage. (At the end of this piece I have a list of other posts about stone buildings and monuments, preservation, and nanotechnology.)

From an August 23, 2023 news snippet by Echo Xie for the South China Morning Post, Note: Links have been removed,

A team of Chinese and Italian researchers has restored parts of a 300-year-old Catholic church in Venice, Italy, using modern nanotechnology.

The Church of Santa Maria di Nazareth [Church of the Scalzi], which overlooks the Grand Canal and is a prime example of Venetian Baroque architecture, is the beneficiary of a patented method developed to consolidate, or treat, marble stones damaged by time and the elements.The research was funded by the Veneto regional government, the National Natural Science Foundation of China, and the Ministry of Science and Technology’s belt and road foreign expert exchange programme [part of the Belt and Road Initiative?].

…

There’s a more extended Sept. 6, 2023 snippet about the research on Vuink,

…

The cutting-edge method could be used to restore landmarks of world-class cultural heritage – including the Pantheon, Trajan’s Column and the Victoria Memorial in London as well as historic sculptures – made from marble similar to the church [Church of Santa Maria di Nazareth]

The research team, led by scientists at China’s Northwestern Polytechnical University in Xian and the CNR [National Research Council of Italy]-Institute of Geosciences and Earth Resources in Florence, Italy, found an “effective and enduring” method to consolidate marble stones after the design and systematic study of nine different treatment methods.

….

Ivana Milanovic’s, ASME [American Society of Mechanical Engineers] Fellow’s Post [undated] on LinkedIn provides more details,

… They [research team] discovered the combination of two commonly used consolidation products – nanosilica and tetraethoxysilane (TEOS) – had the highest consolidating effect among all tested materials.

In the study published in the peer-reviewed journal [Science China Technological Sciences], the authors used a two-step method to consolidate the marble stones. They first applied nanosilica with dimensions less than 10nm to the surface of the stone using a poultice, a paste-like material, to cover the stone. The nanosilica particles could then penetrate as deep as 5cm (2 inches) into the pores of the stone and consolidate it. Then they used the same poultice method and put TEOS on the surface, which could enhance the stone’s hardness or mechanical strength. …

Here’s a link to and a citation for the paper,

Enhanced consolidation efficacy and durability of highly porous calcareous building stones enabled by nanosilica-based treatments by YiJian Cao, Mara Camaiti, Monica Endrizzi, Giorgio Forti, Ernesta Vergani & Ilaria Forti. Science China Technological Sciences volume 66, pages 2197–2212 (2023 Published May 18, 2023

This paper is behind a paywall. However, it is possible to request a PDF copy of the paper from the authors on their Research Gate “Enhanced consolidation efficacy and durability of highly porous calcareous building stones enabled by nanosilica-based treatments” webpage,

My other stone postings:

That should be enough, eh?

A unique design for harvesting biomechanical motion

Leave a reply

Researchers have discovered a new technique for doing this according to an April 25, 2022 news item on ScienceDaily,

Harvesting energy from the day-to-day movements of the human body and turning it into useful electrical energy, is the focus of a new piece of research involving a Northumbria University Professor.

Academics from Northwestern Polytechnical University in China, supported by Professor Richard Fu from Northumbria, have developed a unique design for sensors capable of using human movements — such as bending, twisting and stretching — to power wearable technology devices including smart watches and fitness trackers.

…

An April 25, 2022 Northumbria University press release (also on EurekAlert), which originated the news item, delves further into the topic (Note: Links have been removed),

Self-powered pressure sensors are one of the key components used in these smart electronic devices which are growing in popularity today. The sensors can operate without the need for external power supplies.

Detecting health conditions and measuring performance in sport are among the potential uses for these types of sensors. As a result, they are the focus of extensive research and development, but remain challenging to produce with the performance sensing, flexibility, and sufficient level of power needed for wearable technology.

A new research paper published in the prestigious international scientific journal, Advanced Science, describes how the team led by Professor Weizheng Yuan, Professor Honglong Chang and Associate Professor Kai Tao from Northwestern Polytechnical University (NPU), has worked with Professor Fu to develop a solution.

Their novel method involves using sophisticated materials with pre-patterned pyramid shapes to create friction against the silicone polymer known as polydimethylsiloxane or PDMS. This friction generates a self-powering effect, or triboelectricity, which can significantly enhance the energy available to power a wearable device. 

Professor Tao from NPU explained: “This results in a self-powered tactile sensor with wide environmental tolerance and excellent sensing performance, and it can detect subtle pressure changes by measuring the variations of triboelectric output signal without an external power supply. The sensor design has been tested an is capable of controlling electrical appliances and robotic hands by simulating human finger gestures, confirming its potential for use in wearable technology.”

Professor Fu added: “This self-powered sensor based on hydrogels has a simple fabrication process, but with a superb flexibility, good transparency, fast response and high stability.”

…

Professor Honglong Chang, Dean of School of Mechanical Engineering at NPU, said Northumbria University is one of their most important international partners.

“One of our important tasks this year is to further promote the cooperative relationship with Northumbria University,” he explained. “We are organising NU-NPU bilateral academic forums this year, and we look forward to establishing strong collaborations in various research areas with Northumbria University.”

Professor Jon Reast, Pro Vice-Chancellor (International) at Northumbria University, said he was delighted with the success of the partnership with NPU. “It’s fantastic that this research collaboration is proving successful and producing such ground-breaking work.

“We work closely with more than 500 partner universities, colleges and schools across the world. Within these, NPU is one of a set of extremely high-quality research-led university partners. The relationship with NPU includes researchers within smart materials engineering as well as smart design and is producing some truly excellent, impactful, research in both areas.”

Here’s a link to and a citation for the paper,

Ultra-Sensitive, Deformable, and Transparent Triboelectric Tactile Sensor Based on Micro-Pyramid Patterned Ionic Hydrogel for Interactive Human–Machine Interfaces by Kai Tao, Zhensheng Chen, Jiahao Yu, Haozhe Zeng, Jin Wu, Zixuan Wu, Qingyan Jia, Peng Li, Yongqing Fu, Honglong Chang, Weizheng Yuan. Advanced Science Volume 9, Issue 10 April 5, 2022 2104168 DOI: https://doi.org/10.1002/advs.202104168 First published: 31 January 2022

This paper is open access.