Tag Archives: Qi Zhang

Skin healing with nanoscale borate bioactive glass?

I’d hadn’t heard about skin healing with glass (of any kind) before this July 6, 2021 news item on phys.org,

Recently, with the help of a steady-state strong magnetic field experimental device, scientists constructed nano-scale borate bioactive glass (Nano-HCA@BG), which can effectively reduce the biological toxicity of borate bioglass, improve the biocompatibility of the glass, and promote the effect of borate bioglass on skin repair.

Prof. Wang Junfeng from the Hefei Institutes of Physical Science (HFIPS) of the Chinese Academy of Sciences (CAS), collaborating with Prof. Zhang Teng from Fuzhou University in this study, said, “it is expected to become the next generation of skin wound repair dressings.” Related research was published in Chemical Engineering Journal.

A July 5, 2021 Hefei Institutes of Physical Science, Chinese Academy of Sciences press release (two apparently identical [to each other and to the July 5 version] copies July 6, 2021 and July 13, 2021 also appear on EurekAlert), which originated the news item, explains the advantages of using borate bioglass for skin repair,

Borate bioglass is a glass with boron element (B) as the glass network matrix. With good dopability and degradability, it has great potential in the field of skin tissue repair. However, It releases a large amount of alkaline ions, and the explosive release of these ions will change the acid-base environment of the tissue around the glass material, thereby inhibiting cell proliferation.

In addition, the effective surface area of micron-sized borate bioglass in contact with tissues at the wound is small, and the ions on the glass surface are not conducive to the deposition of collagen, so scars are easily formed at the wound after healing. Therefore, preparing a nano-scale borate bioglass with no biological toxicity and excellent biological performance is an urgent problem to be solved.

In this study, the researchers used a special mobile phase, for the first time, to pre-treat micron-sized borate bioglass by melting method in vitro. They obtained Nano-scale (~50nm) borate bioglass (Nano-HCA@BG), which was covered with an amorphous hydroxyapatite (HCA) layer.

During the processing, the ions (PO43- and CO32-) in the mobile phase were deposited on the surface of the glass to form the HCA layer, which effectively inhibited the rapid release of boron and calcium in the remaining glass and thereby reduced the biological toxicity of the glass itself to cells.

In addition, HCA, as an important inorganic component in bones, has good biocompatibility, and can accelerate the induction of collagen synthesis in tissues.

The results of in vitro degradation experiments, cell experiments, and animal experiments showed that compared with the existing commercialized bioactive glass, HCA and micron-sized borate bioglass, nano-HCA@BG slow-released boron calcium, and other elements can effectively accelerate wound cells migration and further up-regulation of the expression of vascular-related growth factors in the wound.

Besides, the amorphous HCA layer on the surface of the glass not only reduces the rapid release of the glass, but also promotes the deposition of collagen in the wound, which in turn promotes the healing of the wound more quickly.

Here’s a link to and a citation for the paper,

Nanosized HCA-coated borate bioactive glass with improved wound healing effects on rodent model by Ruiguo Chen, Qian Li, Qi zhang, Shuai Xu, Jian Han, Peiyan Huang, Zhiwu Yu, Daping Jia, Juanjuan Liu, Huiling Jia, Ming Shen, Bingwen Hu, Howard Wang, Hongbing Zhan, Teng Zhang, Kun Ma, and Junfeng Wang. Chemical Engineering Journal Volume 426, 15 December 2021, 130299 DOI: https://doi.org/10.1016/j.cej.2021.130299 Available online 12 May 2021

This paper is behind a paywall.

Want better energy storage materials? Add salt

An April 22, 2016 news item on Nanowerk reveals a secret to better energy storage materials,

The secret to making the best energy storage materials is growing them with as much surface area as possible. Like baking, it requires just the right mixture of ingredients prepared in a specific amount and order at just the right temperature to produce a thin sheet of material with the perfect chemical consistency to be useful for storing energy. A team of researchers from Drexel University, Huazhong University of Science and Technology (HUST) and Tsinghua University recently discovered a way to improve the recipe and make the resulting materials bigger and better and soaking up energy — the secret? Just add salt.

An April 22, 2016 Drexel University news release (also on EurekAlert), which originated the news item, provides more detail,

The team’s findings, which were recently published in the journal Nature Communications, show that using salt crystals as a template to grow thin sheets of conductive metal oxides make the materials turn out larger and more chemically pure — which makes them better suited for gathering ions and storing energy.

“The challenge of producing a metal oxide that reaches theoretical performance values is that the methods for making it inherently limit its size and often foul its chemical purity, which makes it fall short of predicted energy storage performance,” said Jun Zhou, a professor at HUST’s Wuhan National Laboratory for Optoelectronics and an author of the research. Our research reveals a way to grow stable oxide sheets with less fouling that are on the order of several hundreds of times larger than the ones that are currently being fabricated.”

In an energy storage device — a battery or a capacitor, for example — energy is contained in the chemical transfer of ions from an electrolyte solution to thin layers of conductive materials. As these devices evolve they’re becoming smaller and capable of holding an electric charge for longer periods of time without needing a recharge. The reason for their improvement is that researchers are fabricating materials that are better equipped, structurally and chemically, for collecting and disbursing ions.

In theory, the best materials for the job should be thin sheets of metal oxides, because their chemical structure and high surface area makes it easy for ions to attach — which is how energy storage occurs. But the metal oxide sheets that have been fabricated in labs thus far have fallen well short of their theoretical capabilities.

According to Zhou, Tang [?] and the team from HUST, the problem lies in the process of making the nanosheets — which involves either a deposition from gas or a chemical etching — often leaves trace chemical residues that contaminate the material and prevent ions from bonding to it. In addition, the materials made in this way are often just a few square micrometers in size.

Using salt crystals as a substrate for growing the crystals lets them spread out and form a larger sheet of oxide material. Think of it like making a waffle by dripping batter into a pan versus pouring it into a big waffle iron; the key to getting a big, sturdy product is getting the solution — be it batter, or chemical compound — to spread evenly over the template and stabilize in a uniform way.

“This method of synthesis, called ‘templating’ — where we use a sacrificial material as a substrate for growing a crystal — is used to create a certain shape or structure,” said Yury Gogotsi, PhD, University and Trustee Chair professor in Drexel’s College of Engineering and head of the A.J. Drexel Nanomaterials Institute, who was an author of the paper. “The trick in this work is that the crystal structure of salt must match the crystal structure of the oxide, otherwise it will form an amorphous film of oxide rather than a thing, strong and stable nanocrystal. This is the key finding of our research — it means that different salts must be used to produce different oxides.”

Researchers have used a variety of chemicals, compounds, polymers and objects as growth templates for nanomaterials. But this discovery shows the importance of matching a template to the structure of the material being grown. Salt crystals turn out to be the perfect substrate for growing oxide sheets of magnesium, molybdenum and tungsten.

The precursor solution coats the sides of the salt crystals as the oxides begin to form. After they’ve solidified, the salt is dissolved in a wash, leaving nanometer-thin two-dimensional sheets that formed on the sides of the salt crystal — and little trace of any contaminants that might hinder their energy storage performance. By making oxide nanosheets in this way, the only factors that limit their growth is the size of the salt crystal and the amount of precursor solution used.

“Lateral growth of the 2D oxides was guided by salt crystal geometry and promoted by lattice matching and the thickness was restrained by the raw material supply. The dimensions of the salt crystals are tens of micrometers and guide the growth of the 2D oxide to a similar size,” the researchers write in the paper. “On the basis of the naturally non-layered crystal structures of these oxides, the suitability of salt-assisted templating as a general method for synthesis of 2D oxides has been convincingly demonstrated.”

As predicted, the larger size of the oxide sheets also equated to a greater ability to collect and disburse ions from an electrolyte solution — the ultimate test for its potential to be used in energy storage devices. Results reported in the paper suggest that use of these materials may help in creating an aluminum-ion battery that could store more charge than the best lithium-ion batteries found in laptops and mobile devices today.

Gogotsi, along with his students in the Department of Materials Science and Engineering, has been collaborating with Huazhong University of Science and Technology since 2012 to explore a wide variety of materials for energy storage application. The lead author of the Nature Communications article, Xu Xiao, and co-author Tiangi Li, both Zhou’s doctoral students, came to Drexel as exchange students to learn about the University’s supercapacitor research. Those visits started a collaboration, which was supported by Gogotsi’s annual trips to HUST. While the partnership has already yielded five joint publications, Gogotsi speculates that this work is only beginning.

“The most significant result of this work thus far is that we’ve demonstrated the ability to generate high-quality 2D oxides with various compositions,” Gogotsi said. “I can certainly see expanding this approach to other oxides that may offer attractive properties for electrical energy storage, water desalination membranes, photocatalysis and other applications.”

Here’s a link to and a citation for the paper,

Scalable salt-templated synthesis of two-dimensional transition metal oxides by Xu Xiao, Huaibing Song, Shizhe Lin, Ying Zhou, Xiaojun Zhan, Zhimi Hu, Qi Zhang, Jiyu Sun, Bo Yang, Tianqi Li, Liying Jiao, Jun Zhou, Jiang Tang, & Yury Gogotsi. Nature Communications 7, Article number:  11296 doi:10.1038/ncomms11296 Published 22 April 2016

This is an open access paper.

Detecting Ochratoxin A in agricultural products with gold nanoparticles

Iranian researchers have developed a fast, inexpensive way to test for a cancer-causing toxicant found in some agricultural products. From a Jan. 5, 2015 news item on Nanowerk (Note: A link has been removed),

Researchers from Isfahan University of Technology used gold nanoparticles in the production of a detection kit to find cancerous toxicant in agricultural products (“Ultrasensitive and quantitative gold nanoparticle-based immunochromatographic assay for detection of ochratoxin A in agro-products”).

The use of the kit increases speed, sensitivity and ease of application.

A Jan. 5, 2015 Iran Nanotechnology Initiative Council (INIC) news release, which originated the news item, describes Ochratoxin A and the kit,

Humans and animals are always threatened by various toxicants naturally produced in different food products. Ochratoxin A is a type of toxicant that is produced by some types of fungi, which has been classified in human cancerous materials (Group B2) by the International Agency for Research on Cancer (IARC).

There are many methods to detect this toxicant, but in addition to high costs, these methods are time-consuming and require skillful and expert people to carry out the tests. The fact is that in many places where the detection of ochratoxin A is a necessity, there is no equipment and the detection process fails.

Increasing the detection speed, ease of application, and reducing costs are among the advantages of the method proposed by the researchers. Obtaining technical knowledge for the production of various detection kits based on this method for different materials is another achievement of the researchers.

In this research, a fast and ultra-sensitive detection kit has been produced based on immunochromatography method. To this end, test tapes have been designed and produced by using gold nanoparticles markers, and the results are obtained by placing the sample on the tape after 15 minutes. Gold nanoparticles create red color after combining with the toxicant and the color is visible by naked eye too.

Here’s a link to and a citation for the published research,

Ultrasensitive and quantitative gold nanoparticle-based immunochromatographic assay for detection of ochratoxin A in agro-products by Marjan Majdinasab, Mahmoud Sheikh-Zeinoddin, Sabihe Soleimanian-Zad, Peiwu Li, Qi Zhang, Xin Li, and Xiaoqian Tang. Journal of Chromatography B Volume 974, 1 January 2015, Pages 147–154. doi:10.1016/j.jchromb.2014.10.034

This paper is behind a paywall.