Tag Archives: TEDxWinnipeg

Interview with the Urbee car’s Jim Kor

In an earlier posting today, (Manitoba’s Urbee) about the Urbee, I promised an interview with Jim Kor, project leader and lead designer. Befoe getting to the interview, here’s a little biographical information from the Urbee website’s Team page,

Jim Kor is a professional engineer (mechanical) with over 35 years of experience in designing automotive, bus, rail, agricultural, and heavy mobile equipment as well as civil structures and product for the aerospace and medical industries. He is the senior designer and project leader for the Urbee project. Jim is the owner of Kor Product Design, a 30 year old international consulting firm.

Congratulations on your achievement, i.e., getting your first prototype completed. Could you describe the 3D printing process in simple terms? (e.g. do you lay down layers of atoms? particles? bits of polymer?; what does a 3D printer look like compared to the printers most of us are accustomed to?; etc.)

The 3-D printing process is an additive process, where a ‘3-D printer’ precisely places a material (such as plastic), thin strands or particles at a time, layer by layer, with each layer bonding to the next, all under computer control, until a rigid part emerges. These 3-D printers look like large metal boxes, and can be the size of bar-fridges (desktop models) or walk-in freezers (floor-mounted models). The input to the machine is strands of material (wound in loops, like wire), and the output is finished parts.

Has this 3D printing process been enabled by nanotechnology?

Yes, I believe so. The head, where the material emerges hot and bonds to the lower layer, is where all the action takes place, and most of the technology is focussed.

Is every single element (tires, windows, seats, panels, etcl) of this car produced by 3D printing?

On our first prototype Urbee, just the body panels are 3-D printed. All the windows were also 3-D printed, but these 3-D printed parts were used as patterns for making the plastic and glass windows within Urbee.

How long does it take to print a piece?
The larger pieces currently can take a long time, or at least they did on our first prototype. But, we are learning, and this machine time will come down, especially with further progress regarding the printing of larger panels.

I gather you’re raising funds for your 2nd prototype. Is that one going to be identical to the first or are you refining the design and how?

The second prototype will greatly benefit from the first prototype (the first time we have seen all major components working within the car). We plan on refining and expanding our use of 3-D printing, taking it into the interior and parts of the chassis.
How close is your product to being commercialized and what would it take to get it commercialized?

We are at first prototype stage. Most optimistic production date would be 2014. It will take continued Research & Development by our Team to get us there.

Could you tell me a little bit about how this project came to be located in Manitoba?

The originators of the project, and most of the Urbee Team lives and works (as designers and engineers) in Winnipeg, Manitoba, Canada.

Have you gotten provincial and federal support for this project? And, if any, what kind? Have you also gotten support from venture capitalists, banks, etc.?

We have gratefully received financial assistance, but the project remains largely self-funded. Without financial assistance (especially donations), and without the expertise and in-kind support of our sponsors (as listed on our website), the project could not have advanced to the point it has. We continue to receive fantastic support from some of the best people, within some of the best companies and organizations in the world. Hats off to them for making this project what it is today.

On a completely different note, Urbee sounds like Herbie, the name of a Volkswagen beetle featured in a number of Disney movies. Was this intentional?

No, it was not intentional. URBEE stands for URBan Electric with Ethanol as back-up. It is a project name that has stuck, is rather unique (easy to do google searches), and which I personally have grown to like. I don’t mind being associated with the original VW Beetle, one of the best-selling cars in the world, … ever, …. (over 24 million units sold worldwide, I believe).

Why did you choose that particular colour for your prototype?

The Industrial Designers within the Team chose the colour. They are extremely talented (the best in the world, in my opinion). They have designed the body to not only look aesthetically pleasing and ‘correct’, but have achieved a Coefficient of Drag (Cd) of 0.15, … extremely low for a practical car. Some would say impossibly low, but two independent computer aerodynamic simulations have verified this number, so we are satisfied that we are there. It is what makes us claim that ‘One day all cars will look like this’, because this body shape honours the physics of the problem (a car body moving at the bottom of an ocean of air).

Is there anything you’d like to add?

Yes. Thanks to all those that have helped advance this groundbreaking and important project. Thanks for your interest in this project, that is helping propel it forward. And keep your eye on our website (www.urbee.net), to see where we’re going next.

Thank you and I wish you and your team the best of luck, Jim Kor.

Here’s one more look at the Urbee,

Urbee rear side at TEDxWinnipeg Sept. 15,2011

ETA Sept. 28,2011 11:50 am PST: I’ve corrected a few grammatical and spelling errors of my own. I am including two videos featuring the Urbee. The first is promotional video produced by the Urbee team,

This second video is a clip from a television programme interview of Jim Kor and Jeff Hanson discussing the 3D printing process and the Urbee,

Manitoba’s Urbee

Manitoba's Urbee and its engineering team at TEDxWinnipeg Sept. 15, 2011 event

There’s a brand new car (prototype) in town. It was unveiled at TEDx Winnipeg on Sept. 15, 2011 by Manitoba-based company. From the Urbee website,

Urbee is a two-passenger hybrid car designed to be incredibly fuel efficient, easy to repair, safe to drive, and inexpensive to own.

Shortly after the TED presentation, the Urbee was featured in a Sept. 20, 2011 article by Ariel Schwartz for Fast Company and in a Sept. 21, 2011 news item for BBC News. From the Schwartz article,

Last year, Stratasys and Kor Ecologic teamed up to develop the first 3-D printed car–a vehicle that has its entire body 3-D printed layer by layer until a finished product emerges. The Urbee was just a partially completed prototype when we first wrote about it last year. …

 

The [finished] prototype, unveiled a few days ago at the TEDx Winnipeg event, is a two-passenger, single-cylinder, eight-horsepower vehicle. That means it has significantly less power than today’s vehicles, which usually have at least 68 horsepower. But those missing horses don’t matter: the Urbee requires just an eighth of the energy of conventional cars. The electric-ethanol hybrid is also designed to get up to 200 mpg on the highway and 100 mpg in city conditions–and it lasts up to 30 years.

There are more details about the printing process and its contribution to the car’s ‘greeness’ in the BBC article,

The use of “additive manufacturing”, where layers of material are built up, or “printed” to form a solid objects, contributed to the car’s green credentials, according to project leader Jim Kor.

“One only puts material where one needs it,” explained Mr Kor, who unveiled his vehicle at the TEDxWinnipeg conference.

“It is an additive process, building the part essentially one ‘molecule’ of material at a time, ultimately with no waste.

“This process can do many materials, and our goal would be to use fully-recycled materials.”

Currently it is only the Urbee’s body panels that are printed – by Minneapolis-based Stratasys. However, Mr Kor said he hoped that other parts would be produced this way in future.

Jim Kor, project leader and lead designer, very kindly answered some questions for an interview about the Urbee, which I will be posting later today.