Tag Archives: Holland

Hong Kong, MosquitNo, and Dengue fever

The most substantive piece I’ve written on dengue fever and a nanotechnology-enabled approach to the problem was a 2013 post explaining why the fever is of such concern, which also included information about a proposed therapeutic intervention by Nanoviricides. From the July 2, 2013 posting, here’s more about the magnitude of the problem,

… the WHO (World Health Organization) fact sheet no. 117,

The incidence of dengue has grown dramatically around the world in recent decades. Over 2.5 billion people – over 40% of the world’s population – are now at risk from dengue. WHO currently estimates there may be 50–100 million dengue infections worldwide every year.

Before 1970, only nine countries had experienced severe dengue epidemics. The disease is now endemic in more than 100 countries in Africa, the Americas, the Eastern Mediterranean, South-east Asia and the Western Pacific. The American, South-east Asia and the Western Pacific regions are the most seriously affected.

Cases across the Americas, South-east Asia and Western Pacific have exceeded 1.2 million cases in 2008 and over 2.3 million in 2010 (based on official data submitted by Member States). Recently the number of reported cases has continued to increase. In 2010, 1.6 million cases of dengue were reported in the Americas alone, of which 49 000 cases were severe dengue.

Not only is the number of cases increasing as the disease spreads to new areas, but explosive outbreaks are occurring. The threat of a possible outbreak of dengue fever now exists in Europe and local transmission of dengue was reported for the first time in France and Croatia in 2010 and imported cases were detected in three other European countries. A recent (2012) outbreak of dengue on Madeira islands of Portugal has resulted in over 1800 cases and imported cases were detected in five other countries in Europe apart from mainland Portugal.

An estimated 500 000 people with severe dengue require hospitalization each year, a large proportion of whom are children. About 2.5% of those affected die.

Fast forwarding to 2015, this latest information about dengue fever features a preventative approach being taken in Hong Kong according to a July 5, 2015 article by Timmy Sung  for the South China Morning Post,

Dutch insect repellent innovator Mosquitno targets Hong Kong as dengue fever cases rise

A Dutch company says it has invented an insect repellent using nanotechnology which can keep clothes and homes mosquito-free for up to three months.

Mosquitno has been invited by a government body to begin trading in Hong Kong as the number of cases reported in the city of the deadly mosquito-borne dengue fever rises.

The new repellent does not include the active ingredient used in many insect repellents, DEET, which has question marks surrounding its safety.

Figures from the Department of Health show the number of dengue fever cases reported rose 8 per cent last year, to 112. There were 34 cases in the first five months of this year, 36 per cent more than in the same period last year. Mosquitoes are most active in the summer months.

MosquitNo does use an ingredient, IR3535, which has caused concern (from Sung’s article),

The Consumer Council has previously warned that IR3535-based mosquito repellents can break down plastic materials and certain synthetic fibres, but Wijnen [Erwin Wijnen, director of the {Mosqutino’s} brand development and global travel retailing] said the ingredient combined with nanotechnology is safe and there was no possibility it would damage clothes.

I was not able to find out more about the company’s nanotechnology solution as applied to MosquitNo,

The NANO Series is a revolutionary, innovative technology designed by scientists especially for MosquitNo. This line utilizes this-breaking insect repellent technology in various products including wipes, textile spray, fabric softener and bracelets. This technology and our trendy applications are truly industry-changing and MosquitNo is at the leading edge!

The active component in all our awesome products within this range is IR3535.

That’s it for technical detail. At least, for now.

Kenya and a draft nanotechnology policy

I don’t often stumble across information about Kenya’s nanotechnology efforts (my last was in a Sept. 1, 2011 posting) but I’m going include my latest find here even though I can’t track down the original source for the information. From an April 29, 2015 news item on SpyGhana (original source: Xinhua News Agency,  official press agency of the People’s Republic of China),

The Kenyan government will soon adopt a comprehensive policy to promote use of nanotechnology in diverse fields like medicine, agriculture, manufacturing and environment.

“Nanotechnology as a science promises more for less. The competitive edge for Kenya as a developing nation lies in robust investments in this technology,” Njeri Wamae, chairman of National Commission for Science, Technology and Innovation (NACOSTI), said in Nairobi.

Nanotechnology is relatively new in Kenya though the government has prioritized its development through research, training and setting up of supportive infrastructure.

Wamae noted that enactment of a nanotechnology policy will position Kenya as a hub for emerging technologies that would revolutionalize key sectors of the economy.

Policy briefs from Kenya’s scientific research body indicates that globally, nanotechnology was incorporated into manufacturing goods worth over 30 billion U.S. dollars in 2005.

The briefs added that nanotechnology related business was worth 2.6 trillion dollars by 2015. Kenya has borrowed best practices from industrialized countries and emerging economies to develop nanotechnology.

Professor Erastus Gatebe, an official at Kenya Industrial Research and Development Institute (KIRDI), noted that China and India offers vital lessons on harnessing nanotechnology to propel industrial growth.

This draft policy seems to be the outcome of a number of initiatives including Nanotechnologies for Development in India, Kenya and the Netherlands: Towards a Framework for Democratic Governance of Risks in Developing Countries, WOTRO (2010 – 2014) from the African Technology Policy Studies (ATPS) Network,

The ATPS has secured funding for a new Integrated Program (IP) on “Nanotechnologies for Development in India, Kenya and the Netherlands: Towards a Framework for Democratic Governance of Risks in Developing Countries, January 2010 – 2014, in liaison with partners in Europe and India. This IP which is led by Prof. Wiebe Bijker of the University of Maastricht, the Netherlands addresses the inevitable risks and benefits associated with emerging technologies, such as nanotechnology through a triangulation of PhD and Post-Doctoral positions drawn from Africa (2), India (1) and the Netherlands (2) based at the University of Maastricht but address core areas of the nanotechnology governance in Africa, India and the Netherlands. The program will be coordinated by Prof. Wiebe Bijker, the University of Maastricht, in the Netherlands; with the University of Hyderabad, India; the ATPS and the University of Nairobi, Kenya as partners.

Nanotechnology events and discussions played in important role in Kenya’s 2013 National Science, Technology and Innovation (ST&I) Week by Daphne Molewa (on the South African Agency for Science and Technology Advancement [SAASTA] website),

The National Science, Technology and Innovation (ST&I) Week, organised by the Ministry of Higher Education, Science and Technology, is a major event on the annual calendar of the Kenyan Government.

The theme for 2013, “Science, Technology and Innovation for the realisation of Kenya’s Vision 2030 and beyond” is aligned with the national vision to transform Kenya into a newly industrialised, middle-income country providing a high-quality life to all its citizens in a safe and secure environment by the year 2030. pemphasis mine]

Nanotechnology, the science of the future

SAASTA representatives Mthuthuzeli Zamxaka and Sizwe Khoza were invited to participate in this year’s festival in Nairobi [Kenya] on behalf of the Nanotechnology Public Engagement Programme (NPEP).

Zamxaka delivered a stirring presentation titled Nanotechnology Public Engagement: The Case of South Africa. He introduced the topic of nanotechnology, focusing on engagement, outreach and awareness. …

Zamxaka touched on a number of nanotechnologies that are currently being applied, such as the research conducted by the Johns Hopkins University in Maryland on biodegradable nano-sized particles that can easily slip through the body’s sticky and viscous mucus secretions to deliver a sustained-release medication cargo. It is believed that these nanoparticles, which degrade over time into harmless components, could one day carry life-saving drugs to patients suffering from dozens of health conditions, including diseases of the eye, lung, gut or female reproductive tract.

For anyone interested , look here for Kenya’s Vision 2030. Harkening back to the first news item and the mention of NACOSTI, Kenya’s National Commission for Science, Technology and Innovation, it can be found here.

FibeRio and VF Corporation want their nanofiber technology to lead in apparel and footwear markets

An April 8, 2015 news item on Azonano describes a new business partnership,

FibeRio Technology Corporation, the total nanofiber solutions company, today announced a strategic partnership with VF Corporation, a global leader in branded lifestyle apparel, footwear and accessories, to develop and commercialize next-generation, performance apparel fabrics leveraging FibeRio’s proprietary nanotechnology.

The partnership centers on FibeRio’s Forcespinning® technology platform and its ability to produce unique nanofiber material in high volumes. VF intends to incorporate FibeRio’s capabilities and expertise across its three Global Innovation Centers which focus on advancements in performance apparel, footwear and jeanswear.

An April 8, 2015 FibeRio news release provides more details, including these about the respective companies which help to contextualize the deal,

About FibeRio Technology Corporation
FibeRio is the efficiency and performance layer expert offering composite media improvement services including nanofiber membrane development, pilot production for limited launches and performance layer supply. The Fiber Engine series delivers on the industry’s need for high output, versatile, yet economic nanofiber production solutions. For more information visit www.fiberiotech.com

About VF Corporation
VF Corporation (NYSE: VFC) is a global leader in the design, manufacture, marketing and distribution of branded lifestyle apparel, footwear and accessories. The company’s highly diversified portfolio of 30 powerful brands spans numerous geographies, product categories, consumer demographics and sales channels, giving VF a unique industry position and the ability to create sustainable, long-term growth for our customers and shareholders. The company’s largest brands are The North Face®, Vans®, Timberland®, Wrangler®, Lee® and Nautica®. For more information, visit www.vfc.com.

There are the usual “we’re thrilled and about to do exciting things” quotes along with a dearth of details explaining how nanofibers are going to lead to higher performance,

“VF’s Global Innovation Center strategy is centered on the pursuit of disruptive design and materials that will meaningfully redefine the future of apparel and footwear for our consumers,” said Dan Cherian, Vice President, VF Global Innovation Centers. “Our partnership with FibeRio is a great step toward the co-development of proprietary, high-performance nanofiber materials that will help push the boundaries of performance and explore the creation of new apparel and footwear market categories.”

FibeRio CEO Ellery Buchanan stated, “We are excited to partner with VF Corporation on our Forcespinning-based advanced nanofiber textiles. VF’s long history of brand strength and operational excellence along with our leading commercial scale nanofiber production expertise creates an excellent opportunity to proactively shape the competitive landscape.”

Nanofibers’ higher surface area and smaller pore size improves the characteristics of fibrous material. This enables performance levels in any given application to be materially improved using significantly less material in the end product, which also allows for lighter weight and lower cost. [emphasis mine] FibeRio’s Forcespinning technology is the only technology platform capable of both commercial scale melt and solution spinning nanofibers. This provides a more sustainable method of production because melt spinning does not require solvents. [emphasis mine] Additionally, Forcespinning can be used to solution spin with vastly smaller amounts of solvents than traditional nanofiber production processes such as electrospinning.

Using less material could be considered a good thing, assuming it doesn’t mean that consumers need to purchase the item more frequently. The sustainability aspects such as no solvents or lesser amounts of solvent sound good unless increased demand means that a lesser amount becomes a greater amount.

I look forward to learning more as this partnership develops. One final note, I wonder if these folks are competitive with Teijin-Aramid (a Japanese-Dutch company in the Teijin Group), a company which does a lot of work with nanofibers last mentioned here in a Sept. 24, 2014 posting (scroll down about 60% of the way),

Still talking about textile fibres but on a completely different track, I received a news release this morning (Sept. 25, 2014) from Teijin Aramid about carbon nanotubes and fibres,

Researchers of Teijin Aramid, based in the Netherlands, and Rice University in the USA are awarded with the honorary ‘Paul Schlack Man-Made Fibers Prize’ for corporate-academic partnerships in fiber research. Their new super fibers are now driving innovation in aerospace, healthcare, automotive, and (smart) clothing.

I also found an April 12, 2012 post about Teijin Fibers (another Teijin Group company) and their work with nanofibers and golf gloves and athletic socks.

Opals, Diana Ross, and nanophotonic hybridization

It was a bit of a stretch to include Diana Ross in a Jan. 12, 2015 news item on Nanowerk about nanophotonic research at the University of Twente’s MESA+ Institute for Nano­technology  but I’m glad they did,

Ever since the early 1900s work of Niels Bohr and Hendrik Lorentz, it is known that atoms display characteristic resonant behavior to light. The hallmark of a resonance is its characteristic peak-trough behavior of the refractive index with optical frequency. Scientists from the Dutch MESA+ Institute for Nano­technology at the University of Twente have recently infiltrated cesium atoms in a self-assembled opal to create a hybrid nanophotonic system. By tuning the opal’s forbidden gap relative to the atomic resonance, dra­matic changes are observed in reflectivity. In the most extreme case, the atomic reflection spectrum is turned upside down[1] compared to the traditional case. Since dispersion is crucial in the control of optical signal pulses, the new results offer opportunities for optical information manipulation. As atoms are exquisite storage de­vices for light quanta, the results open vistas on quantum information processing, as well as on new nanoplasmonics.

A Jan. 12, 2015 MESA+ Institute for Nano­technology at the University of Twente press release, which originated the news item, provides an illustrative diagram and a wealth of technical detail about the research,

Courtesy of the University of Twente

Courtesy of the University of Twente

While the speed of light c is proverbial, it can readily be modified by sending light through a medium with a certain refractive index n. In the medium, the speed will be decreased by the index to c/n. In any material, the refractive index depends on the frequency of the light. Usually the refractive index increases with frequency, called normal dispersion as it prevails at most frequencies in most materials such as a glass of water, a telecom fiber, or an atomic vapor. Close to the resonance frequency of the material, the index strongly decreases, called anomalous dispersion.

Dispersion is essential to control how optical bits of information – encoded as short pulses – is manipulated optical circuits. In modern optics at the nanoscale, called nanophotonics, dispersion is controlled with classes of complex nanostruc­tures that cause novel behavior to emerge. An example is a photonic crystal fiber, which does not consist of only glass like a traditional fiber, but of an intricate arrange­ment of holes and glass nanostructures.

The Twente team led by Harding devised a hybrid system consisting of an atomic vapor infiltrated in an opal photonic crystal. Photonic crystals have attracted considerable attention for their ability to radically control propagation and emission of light. These nanostructures are well-known for their ability to control the emission and propagation of light. The opals have a periodic variation of the refractive index (see Figure 1) that ensures that a certain color of light is forbidden to exist inside the opal. The light cannot enter the opal as it is reflected, which is called a gap (see Figure 1). In an analogy to semiconductors, such an effect is called a “photonic band gap”. Photonic gaps are at the basis of tiny on-chip light sources and lasers, efficient solar cells, invisibility cloaks, and devices to process optical information.

The Twente team changed the index of refraction of the voids in a photonic crystal by substituting the air by a vapor of atoms with a strong resonance, as shown in Figure 1. The contrast of the refractive index between the vapor and the opal’s silica nano­spheres was effectively used as a probe. The density of the cesium vapor was greatly varied by changing the temperature in the cell up to 420 K. At the same time, the photonic gap of the opal shifted relative to the atomic resonance due to a slow chemical reaction between the opal’s backbone material (silica) and the cesium.

On resonance, light excites an atom to a higher state and subsequently the atom reemits the light. Hence, an atom behaves like a little cavity that stores light. Simultaneously the index of refraction changes strongly for colors near resonance. For slightly longer wavelengths the index of refraction is high, on resonance it is close to one, and slightly shorter wavelengths it can even decrease below one. This effect of the cesium atoms is clearly visible in the reflectivity spectra, shown in Figure 2 [not included here], as a sharp increase and decrease of the reflectivity near the atomic resonance. Intriguingly, the characteristic peak-and-trough behavior of atoms (seen at 370 K) was turned upside down at the highest temperature (420 K), where the ce­sium reso­nance was on the red side of the opal’s stopgap.

In nanophotonics, many efforts are currently being devoted to create arrays of nanoresonators in photonic crystals, for exquisite optical signal control on a chip. Unfortunately, however, there is a major challenge in engineering high-quality pho­tonic resonators: they are all different due to inevitable fabrication variations. Hence, it is difficult to tune every resonator in sync. “Our atoms in the opal may be consid­ered as the equivalent of an carefully engineered array of nano-resonators” explains Willem Vos, “Nature takes care that all resonators are all exactly the same. Our hy­brid system solves the variability problem and could perhaps be used to make pho­tonic memories, sensors or switches that are naturally tuned.” And leading Spanish theorist Javier Garcia de Abajo (ICFO) enthuses: “This is a fine and exciting piece of work, initiating the study of atomic resonances with photonic modes in a genuinely new fashion, and suggesting many exciting possibilities, for example through the extension of this study towards combinations with metal nanoplasmonics.”

Here’s a link to and a citation for the paper published in Physical Review B,

Nanophotonic hybridization of narrow atomic cesium resonances and photonic stop gaps of opaline nanostructures by Philip J. Harding, Pepijn W. H. Pinkse, Allard P. Mosk, and Willem L. Vos. Phys. Rev. B 91, 045123 – Published 20 January 2015 DOI: http://dx.doi.org/10.1103/PhysRevB.91.045123

This paper is behind a paywall but there is an earlier iteration of the paper available on the open access arXiv.org website operated by Cornell University,

Nanophotonic hybridization of narrow atomic cesium resonances and photonic stop gaps of opaline nanostructures by Philip J. Harding, Pepijn W.H. Pinkse, Allard P. Mosk, Willem L. Vos. (Submitted on 11 Sep 2014) arXiv:1409.3417

As I understand it, the arXiv.org website is intended to open up access to research and to offer an informal peer review process.

Finally, for anyone who’s nostalgic or perhaps has never heard Diana Ross sing ‘Upside Down’,

Could there be a quantum internet?

We’ve always had limited success with predicting future technologies by examining current technologies. For example, the Internet and World Wide Web as we experience them today would have been unthinkable for most people in the 1950s when computers inhabited entire buildings and satellites were a brand new technology designed for space exploration not bouncing communication signals around the planet. That said, this new work on a ‘quantum internet’ from Eindhoven University of Technology is quite intriguing (from a Dec. 15, 2014 news item on Nanowerk),

In the same way as we now connect computers in networks through optical signals, it could also be possible to connect future quantum computers in a ‘quantum internet’. The optical signals would then consist of individual light particles or photons. One prerequisite for a working quantum internet is control of the shape of these photons. Researchers at Eindhoven University of Technology (TU/e) and the FOM foundation  [Foundation for Fundamental Research on Matter] have now succeeded for the first time in getting this control within the required short time.

A Dec. 15, 2014 Eindhoven University of Technology (TU/e) press release, which originated the news item, describes one of the problems with a ‘quantum internet’ and the researchers’ solution,

Quantum computers could in principle communicate with each other by exchanging individual photons to create a ‘quantum internet’. The shape of the photons, in other words how their energy is distributed over time, is vital for successful transmission of information. This shape must be symmetric in time, while photons that are emitted by atoms normally have an asymmetric shape. Therefore, this process requires external control in order to create a quantum internet.

Optical cavity

Researchers at TU/e and FOM have succeeded in getting the required degree of control by embedding a quantum dot – a piece of semiconductor material that can transmit photons – into a ‘photonic crystal’, thereby creating an optical cavity. Then the researchers applied a very short electrical pulse to the cavity, which influences how the quantum dot interacts with it, and how the photon is emitted. By varying the strength of this pulse, they were able to control the shape of the transmitted photons.

Within a billionth of a second

The Eindhoven researchers are the first to achieve this, thanks to the use of electrical pulses shorter than nanosecond, a billionth of a second. This is vital for use in quantum communication, as research leader Andrea Fiore of TU/e explains: “The emission of a photon only lasts for one nanosecond, so if you want to change anything you have to do it within that time. It’s like the shutter of a high-speed camera, which has to be very short if you want to capture something that changes very fast in an image. By controlling the speed at which you send a photon, you can in principle achieve very efficient exchange of photons, which is important for the future quantum internet.”

Here’s a link to and a citation for the paper,

Dynamically controlling the emission of single excitons in photonic crystal cavities by Francesco Pagliano, YongJin Cho, Tian Xia, Frank van Otten, Robert Johne, & Andrea Fiore. Nature Communications 5, Article number: 5786 doi:10.1038/ncomms6786 Published 15 December 2014

This is an open access paper.

ETA Dec. 16, 2014 at 1230 hours PDT: There is a copy of the Dec. 15, 2014 news release on EurekAlert.

Replacing copper wire in motors?

Finnish researchers at Lappeenranta University of Technology (LUT) believe it may be possible to replace copper wire used in motors with spun carbon nanotubes. From an Oct. 15, 2014 news item on Azonano,

Lappeenranta University of Technology (LUT) introduces the first electrical motor applying carbon nanotube yarn. The material replaces copper wires in windings. The motor is a step towards lightweight, efficient electric drives. Its output power is 40 W and rotation speed 15000 rpm.

Aiming at upgrading the performance and energy efficiency of electrical machines, higher-conductivity wires are searched for windings. Here, the new technology may revolutionize the industry. The best carbon nanotubes (CNTs) demonstrate conductivities far beyond the best metals; CNT windings may have double the conductivity of copper windings.

”If we keep the design parameters unchanged only replacing copper with carbon nanotube yarns, the Joule losses in windings can be reduced to half of present machine losses. By lighter and more ecological CNT yarn, we can reduce machine dimensions and CO2 emissions in manufacturing and operation. Machines could also be run in higher temperatures,” says Professor Pyrhönen [Juha Pyrhönen], leading the prototype design at LUT.

An Oct. ??, 2014 (?) LUT press release, which originated the news item, further describes the work,

Traditionally, the windings in electrical machines are made of copper, which has the second best conductivity of metals at room temperature. Despite the high conductivity of copper, a large proportion of the electrical machine losses occur in the copper windings. For this reason, the Joule losses are often referred to as copper losses. The carbon nanotube yarn does not have a definite upper limit for conductivity (e.g. values of 100 MS/m have already been measured).

According to Pyrhönen, the electrical machines are so ubiquitous in everyday life that we often forget about their presence. In a single-family house alone there can be tens of electrical machines in various household appliances such as refrigerators, washing machines, hair dryers, and ventilators.

“In the industry, the number of electrical motors is enormous: there can be up to tens of thousands of motors in a single process industry unit. All these use copper in the windings. Consequently, finding a more efficient material to replace the copper conductors would lead to major changes in the industry,” tells Professor Pyrhönen.

There are big plans for this work according to the press release,

The prototype motor uses carbon nanotube yarns spun and converted into an isolated tape by a Japanese-Dutch company Teijin Aramid, which has developed the spinning technology in collaboration with Rice University, the USA. The industrial applications of the new material are still in their infancy; scaling up the production capacity together with improving the yarn performance will facilitate major steps in the future, believes Business Development Manager Dr. Marcin Otto from Teijin Aramid, agreeing with Professor Pyrhönen.

“There is a significant improvement potential in the electrical machines, but we are now facing the limits of material physics set by traditional winding materials. Superconductivity appears not to develop to such a level that it could, in general, be applied to electrical machines. Carbonic materials, however, seem to have a pole position: We expect that in the future, the conductivity of carbon nanotube yarns could be even three times the practical conductivity of copper in electrical machines. In addition, carbon is abundant while copper needs to be mined or recycled by heavy industrial processes.”

The researchers have produced this video about their research,

There’s a reference to some work done at Rice University (Texas, US) with Teijin Armid (Japanese-Dutch company) and Technion Institute (Israel) with spinning carbon nanotubes into threads that look like black cotton (you’ll see the threads in the video). It’s this work that has made the latest research in Finland possible. I have more about the the Rice/Teijin Armid/Technion CNT project in my Jan. 11, 2013 posting, Prima donna of nanomaterials (carbon nanotubes) tamed by scientists at Rice University (Texas, US), Teijin Armid (Dutch/Japanese company), and Technion Institute (based in Israel).

Hitchhikers at the nanoscale show how cells stir themselves

A May 30, 2014 news item on Nanowerk highlights some molecule-tracking research,

Chemical engineers from Rice University and biophysicists from Georg-August Universität Göttingen in Germany and the VU University Amsterdam in the Netherlands have successfully tracked single molecules inside living cells with carbon nanotubes.

Through this new method, the researchers found that cells stir their interiors using the same motor proteins that serve in muscle contraction.

A May 29, 2014 Rice University news release by Mike Williams, which originated the news item, describes the researchers’ work,

The team attached carbon nanotubes to transport molecules known as kinesin motors to visualize and track them as they moved through the cytoplasm of living cells.

Carbon nanotubes are hollow cylinders of pure carbon with one-atom-thick walls. They naturally fluoresce with near-infrared wavelengths when exposed to visible light, a property discovered at Rice by Professor Rick Smalley a decade ago and then leveraged by Rice Professor Bruce Weisman to image carbon nanotubes. When attached to a molecule, the hitchhiking nanotubes serve as tiny beacons that can be precisely tracked over long periods of time to investigate small, random motions inside cells.

“Any probe that can hitch the length and breadth of the cell, rough it, slum it, struggle against terrible odds, win through and still know where its protein is, is clearly a probe to be reckoned with,” said lead author Nikta Fakhri, paraphrasing “The Hitchhiker’s Guide to the Galaxy.” Fakhri, who earned her Rice doctorate in Pasquali’s lab in 2011, is currently a Human Frontier Science Program Fellow at Göttingen.

“In fact, the exceptional stability of these probes made it possible to observe intracellular motions from times as short as milliseconds to as long as hours,” she said.

For long-distance transport, such as along the long axons of nerve cells, cells usually employ motor proteins tied to lipid vesicles, the cell’s “cargo containers.” This process involves considerable logistics: Cargo needs to be packed, attached to the motors and sent off in the right direction.

“This research has helped uncover an additional, much simpler mechanism for transport within the cell interior,” said principal investigator Christoph Schmidt, a professor of physics at Göttingen. “Cells vigorously stir themselves, much in the way a chemist would accelerate a reaction by shaking a test tube. This will help them to move objects around in the highly crowded cellular environment.”

The researchers showed the same type of motor protein used for muscle contraction is responsible for stirring. They reached this conclusion after exposing the cells to drugs that suppressed these specific motor proteins. The tests showed that the stirring was suppressed as well.

The mechanical cytoskeleton of cells consists of networks of protein filaments, like actin. Within the cell, the motor protein myosin forms bundles that actively contract the actin network for short periods. The researchers found random pinching of the elastic actin network by many myosin bundles resulted in the global internal stirring of the cell. Both actin and myosin play a similar role in muscle contraction.

The highly accurate measurements of internal fluctuations in the cells were explained in a theoretical model developed by VU co-author Fred MacKintosh, who used the elastic properties of the cytoskeleton and the force-generation characteristics of the motors.

“The new discovery not only promotes our understanding of cell dynamics, but also points to interesting possibilities in designing ‘active’ technical materials,” said Fakhri, who will soon join the Massachusetts Institute of Technology faculty as an assistant professor of physics. “Imagine a microscopic biomedical device that mixes tiny samples of blood with reagents to detect disease or smart filters that separate squishy from rigid materials.”

There is an accompanying video,

This video is typical of the kind of visual image that nanoscientists look at and provides an interesting contrast to ‘nano art’ where colours and other enhancements are added. as per this example, NanoOrchard, from a May 13, 2014 news item on Nanowerk about the 2014 Materials Research Society spring meeting and their Science as Art competition,

NanoOrchard – Electrochemically overgrown CuNi nanopillars. (Image courtesy of the Materials Research Society Science as Art Competition and Josep Nogues, Institut Catala de Nanociencia i Nanotecnologia (ICN2), Spain, and A. Varea, E. Pellicer, S. Suriñach, M.D. Baro, J. Sort, Univ. Autonoma de Barcelona) [downloaded from http://www.nanowerk.com/nanotechnology-news/newsid=35631.php]

NanoOrchard – Electrochemically overgrown CuNi nanopillars. (Image courtesy of the Materials Research Society Science as Art Competition and Josep Nogues, Institut Catala de Nanociencia i Nanotecnologia (ICN2), Spain, and A. Varea, E. Pellicer, S. Suriñach, M.D. Baro, J. Sort, Univ. Autonoma de Barcelona) [downloaded from http://www.nanowerk.com/nanotechnology-news/newsid=35631.php]

Getting back to the carbon nanotube hitchhikers, here’s a link to and a citation for the paper,

High-resolution mapping of intracellular fluctuations using carbon nanotubes by Nikta Fakhri, Alok D. Wessel, Charlotte Willms, Matteo Pasquali, Dieter R. Klopfenstein, Frederick C. MacKintosh, and Christoph F. Schmidt. Science 30 May 2014: Vol. 344 no. 6187 pp. 1031-1035 DOI: 10.1126/science.1250170

This article is behind a paywall.

One final comment, I am delighted by the researcher’s reference to the Hitchhiker’s Guide to the Galaxy.

Toxicity, nanoparticles, soil, and Europe’s NANO-ECOTOXICITY Project

I have featured pieces on nanoparticles, toxicity, and soil in the past (this Aug. 15, 2011 posting about Duke University’s mesocosm project is probably the most relevant) but this study is the first one I’ve seen focusing on earthworms. From the Sept. 23, 2013 news item on Nanowerk (Note: A link has been removed),

From the clothes and make-up we wear to the electronic devices we use every day, nanotechnology is becoming ubiquitous. But while industry has mastered the production of such materials, little is known about their fate once their service life comes to an end. The NANO-ECOTOXICITY project looked into their impact on soil organisms.

The Sept. 23, 2013 CORDIS (European Commission Community Research and Development Information Service) news release, which originated the new item, offers a Q&A (Question and Answer) with the project research leader,

Dr Maria Diez-Ortiz, research leader of the NANO-ECOTOXICITY project, tells us about her research findings and how she expects them to help increase knowledge and shape tools allowing for standard environmental hazard and risk-assessment methodologies.

What is the background of the NANO-ECOTOXICITY project?

Nanotechnology is based on the idea that, by engineering the size and shape of materials at the scale of atoms, i.e. nanometres (nm), distinct optical, electronic, or magnetic properties can be tuned to produce novel properties of commercial value. However, there is an obvious concern that such novel properties may also lead to novel behaviour when interacting with biological organisms, and thus to potentially novel toxic effects.

Since nanoparticles (NPs) are similar in size to viruses, their uptake by and transport through tissues are based on mechanisms distinct from those of molecular uptake and transport. Therefore, there is concern that standard toxicological tests may not be applicable or reliable in relation to NPs, hence compromising current risk-assessment procedures.

The majority of research on nano-safety in the environment has so far focused on the aquatic environment. Current research on environmental fate, however, indicates that soils will become the biggest environmental sink for nanoparticles. Following their entry into liquid waste streams, nanoparticles will pass through wastewater-treatment. processes, ending up in waste sludge which may accumulate in the agricultural land where this sludge is often applied.

What are the main objectives of the project?

This project deals with the toxicokinetics – that is, the rate at which a chemical enters a body and affects it – of metal nanoparticles coming into contact with soil-dwelling organisms. The aim is to determine NPs’ fate and effects in terrestrial ecosystems by means of case studies with zinc oxide and silver NPs, which represent different fate kinetics.

The project’s main objectives are to assess the toxicity of metal nanoparticles in soils in the short and long term; the main route of exposure for earthworms and whether it differs from those of ionic metals; and, finally, the influence of the exposure media on metal nanoparticle toxicity.

What is new or innovative about the project and the way it is addressing these issues?

We have been running a long-term study where soils with AgNP [silver nanoparticles] were stored and left to age for up to a year; their toxicity was tested at the start and after three, seven and 12 months of ageing. The results showed that silver toxicity increased over time, meaning that short-term standard toxicity tests may underestimate the environmental risk of silver nanoparticles.

In parallel, we found that organisms exposed to silver nanoparticles in short-term studies accumulated higher silver concentrations than organisms that were exposed to the same mass concentration of ionic silver. However, these NP exposed organisms actually suffered lower toxic effects. This observation contradicts the prevailing assumption in toxicology that the internalised concentration is directly related to chemical concentration at the target site and hence to its toxicity. This observation creates a new paradigm for nano-ecotoxicology.

What is not yet known is whether the accumulated NP metal may in the longer-term ultimately become toxic (e.g. through dissolution and ion release) in cells and tissues where AgNPs may be stored. Should this occur, the high concentrations accumulated may ultimately result in greater long-term toxicity for NPs than for ionic forms. This may reveal these accumulated NPs as internalised ‘time bombs’ relevant to long-term effects and toxicity.

However, it has to be borne in mind that the redicted environmental concentrations resulting from current use of nanoparticles (e.g. results from EU projects like NANOFATE2) are many times smaller than those used in these studies, meaning that such accumulations of nanoparticle-related silver are unlikely to occur in the environment or, ultimately, in humans.

What difficulties did you encounter and how did you solve them?

The main problems encountered relate to the tracking of nanoparticles inside the tissues and soils, as both are complex matrices. The analysis of the particles is a challenge in itself, even when in water, but to get information about their state in these matrices often requires unrealistic exposure concentrations (due to low detection limits of the highly specialised techniques used for analysis) or extraction of the particles from the matrices, which could potentially change the state of the particles.

In this project, I travelled to University of Kentucky to work with Jason Unrine and used gentle water-based extractions of soil samples immediately before analysing them using ‘Field-flow fractionation’ and ‘Inductively coupled plasma mass spectrometry’ to identify the state of nanoparticles in my aged soils.

To look at what form (speciation) of silver and zinc from the nanoparticle exposures could be found inside worms I collaborated with NANOFATE researchers at Cardiff University who fixed and thinly sectioned the worm tissues. I was lucky to be given the time to use specialist facilities like the UK’s Diamond Light Source synchrotron to investigate where and in what form the metals and potential nanoparticles could be found in these tissues.

The main challenge is that as soon as you take nanoparticles out of the manufacturers’ bottle they start changing, particularly when put into environments likes natural soils and waters, or even organisms. Therefore a lot of characterisation is needed during exposure to establish the state of the nanoparticles the organisms have been exposed to and how fast they are changing from pristine particles to dissolved ions, or particles with completely different surfaces.

Technical solutions to characterisation have been found during this short project, but this will remain a logistical challenge for many years to come as the analysis equipment is still very specialised and expensive and therefore not generally available.

What are the concrete results from the research so far?

The project has helped us draw various conclusions regarding the impact of NPs on the environment and how to assess them. First, we now know that soil acidity, or pH, influences the dissolution and toxicity of ZnO nanoparticles [zinc oxide].

Then, we found that toxicity of silver nanoparticles’ increases over time and that the particles’ coating affects their toxicity to soil invertebrates.

As previously mentioned, earthworms exposed to silver nanoparticles for 28 days accumulated higher silver concentrations than earthworms exposed to silver ions, without the excess silver from the nanoparticles having a toxic effect. [emphasis mine] Moreover, soil ingestion was identified as the main route of exposure to AgNP and ZnONP in earthworms.

How can industry and decision-makers ensure that nanomaterials do not impact our environment?

We hope that this project, and the larger EU project NANOFATE to which it is linked, will provide knowledge and tools enabling standard environmental-hazard and risk-assessment methodologies to be applied to engineered nanoparticles (ENPs) with just a few judicious modifications. The current systems and protocols for chemical risk assessment have been developed over decades, and where no novel toxic mechanisms exist, our results tend to say that nano fits in as long as we measure the right things and characterise realistic exposures properly.

Our research aims to determine the minimum methodological tweaks needed. So far everything indicates that the potential benefits from nanotechnology can be realised and managed safely alongside other chemicals. While we are fairly confident at this stage that ENPs impose no greater acute effects on important biological parameters – like reproduction – than their ionic forms, the NANO-ECOTOXICITY results demonstrate that we have some way to go before we can state loud and clear that we do not believe there is any novel low-level or long-term effect.

As for all chemicals, proving such a negative is impossible using short-term tests. We think the final conclusions by industry and regulators on safe use of nanoparticles should and will have to be made according to a ‘weight of evidence’ approach – proving there is a gap between predicted likely exposure levels and those levels seen to cause any effects or accumulations within ecosystem species.

What are the next topics for your research?

This project has finished but the next step for any other funding opportunity would be to address increasingly environmentally relevant exposure scenarios by analysing how nanoparticles modify in the environment and interact with living tissues and organisms at different trophic levels. I would like to investigate nanoparticle transformation and interactions in living tissues. To date, the studies that have identified this ‘excess’ accumulation of non-toxic metal loads in nanoparticleexposed organisms have only been short term.

Apart from the obviously increased food-chain transfer potential, is also not known whether, over the longer term, the accumulated NP-derived metal ultimately becomes toxic when present in tissues and cells. Such transformation and release of metal ions within tissues may ultimately result in greater longterm toxicity for NPs than for ionic forms.

Furthermore, I want to test exposures in a functioning model ecosystem including interspecific interactions and trophic transfer. Since interactions between biota and nanoparticles are relevant in natural soil systems, caution is needed when attempting to predict the ecological consequences of nanoparticles based on laboratory assays conducted with only a single species. In the presence of the full complement of biological components of soil systems, complex NPs may follow a range of pathways in which coatings may be removed and replaced with exudate materials. Studies to quantify the nature of these interactions are therefore needed to identify the fate, bioavailability and toxicity of realistic ‘non-pristine’ forms of NPs present in real soil environments.

New to me was the material about ageing silver nanoparticles and their increased toxicity over time. While this is an interesting piece of information it’s not necessarily all that useful. It seems even with their increased uptake compared to silver ions, silver nanoparticles (Diez-Ortiz doesn’t indicate whether or not * they tested variously aged silver nanoparticles) did not have toxic effects on the earthworms tested.

The NANO-ECOTOXICITY website doesn’t appear to exist anymore but you can find the NANOFATE (Nanoparticle Fate Assessment and Toxicity in the Environment) website here.

* ‘not’ removed to clarify meaning, Oct. 9, 2013. (Note: I had on Oct. 8, 2013 removed ‘not’ in a second place from the sentence in an attempt t o clarify the meaning and ended up not making any sense at all.) Please read Maria Diez-Ortiz in the Comments, as she clarifies matters in a way I could never hope to.

Archivists, rejoice! Fused quartz stores data for millions of years at the University of Southampton (UK)

There’s a July 9,  2013 news item on Nanowerk touting nanostructured glass device which is being compared to Superman’s memory crystal (see this Wikipedia essay on Superman’s Fortress of Solitude for a description of Superman’s memory crystals),

Using nanostructured glass, scientists at the University of Southampton have, for the first time, experimentally demonstrated the recording and retrieval processes of five dimensional digital data by femtosecond laser writing. The storage allows unprecedented parameters including 360 TB/disc data capacity, thermal stability up to 1000°C and practically unlimited lifetime.

Coined as the ‘Superman’ memory crystal, as the glass memory has been compared to the “memory crystals” used in the Superman films, the data is recorded via self-assembled nanostructures created in fused quartz, which is able to store vast quantities of data for over a million years. The information encoding is realised in five dimensions: the size and orientation in addition to the three dimensional position of these nanostructures. [emphases mine]

The July 9, 2013 University of Southampton news release, which originated the news item, provides more details,

A 300 kb digital copy of a text file was successfully recorded in 5D using ultrafast laser, producing extremely short and intense pulses of light. The file is written in three layers of nanostructured dots separated by five micrometres (one millionth of a metre).

The self-assembled nanostructures change the way light travels through glass, modifying polarisation of light that can then be read by combination of optical microscope and a polariser, similar to that found in Polaroid sunglasses.

The research is led by Jingyu Zhang from the University’s Optoelectronics Research Centre (ORC) and conducted under a joint project with Eindhoven University of Technology.

“We are developing a very stable and safe form of portable memory using glass, which could be highly useful for organisations with big archives. At the moment companies have to back up their archives every five to ten years because hard-drive memory has a relatively short lifespan,” says Jingyu. [emphasis mine]

“Museums who want to preserve information or places like the national archives where they have huge numbers of documents, would really benefit.”

This work was presented at the CLEO 2013 (Conference on Lasers and Electro-Optics in San Jose [US]). Here’s a link to and a citation for the 2 pp presentation paper,

5D Data Storage by Ultrafast Laser Nanostructuring in Glass by Jingyu Zhang, Mindaugas Gecevičius, Martynas Beresna, and Peter G. Kazansky. Presentation paper for CLEO 2013

© 2013 Optical Society of America OCIS codes (140.3390) Laser materials processing, (210.0210) Optical data storage

This research was conducted as part of the European Union’s Femtoprint project, which is funded under the Framework Programme 7 initiative. Here’s more about Femtoprint from the homepage,

FEMTOPRINT is to develop a printer for microsystems with nano-scale features fabricated out of glass. Our ultimate goal is to provide a large pool of users from industry, research and universities with the capability of producing their own micro-systems, in a rapid-manner without the need for expensive infrastructures and specific expertise. Recent researches have shown that one can form three-dimensional patterns in glass material using low-power femtosecond laser beam. This simple process opens interesting new opportunities for a broad variety of microsystems with feature sizes down to the nano-scale. These patterns can be used to form integrated optics components or be ‘developed’ by chemically etching to form three-dimensional structures like fluidic channels and micro-mechanical components. Worth noticing, sub-micron resolution can be achieved and sub-pattern smaller than the laser wavelength can be formed. Thanks to the low-energy required to pattern the glass, femtosecond laser consisting simply of an oscillator are sufficient to produce such micro- and nano- systems.

These systems are nowadays table-top and cost a fraction of conventional clean-room equipments. It is highly foreseeable that within 3 to 5 years such laser systems will fit in a shoe-box. The project specific objectives are:

1/ Develop a femtosecond laser suitable for glass micro-/nano- manufacturing that fits in a shoe-box

2/ Integrate the laser in a machine similar to a printer that can position and manipulate glass sheets of various thicknesses

3/ Demonstrate the use of the printer to fabricate a variety of micro-/nano-systems with optical, mechanical and fluid-handling capabilities. A clear and measurable outcome of Femtoprint will be to be in a situation to commercialize the ‘femtoprinter’ through the setting-up of a consortium spin-off. The potential economical impact is large and is expected in various industrial sectors.

I think any archivist hearing about data storage that can last a million years will be thrilled although I suspect it’s going to be a long, long time before these 5D ‘memory’ crystals are going to be storing any data for anyone. In the meantime, there are efforts such as the Council of Canadian Academies’ (CCA) Memory Institutions and the Digital Revolution assessment (mentioned 2/3 of the way down in my June 5, 2013 posting).

Prosthetics and the human brain

On the heels of research which suggests that humans tend to view their prostheses, including wheel chairs, as part of their bodies, researchers in Europe  have announced the development of a working exoskeleton powered by the wearer’s thoughts.

First, there’s the ‘wheelchair’ research, from the Mar. 6, 2013 news item on ScienceDaily,

People with spinal cord injuries show strong association of wheelchairs as part of their body, not extension of immobile limbs.

The human brain can learn to treat relevant prosthetics as a substitute for a non-working body part, according to research published March 6 in the open access journal PLOS ONE by Mariella Pazzaglia and colleagues from Sapienza University and IRCCS Fondazione Santa Lucia of Rome in Italy, supported by the International Foundation for Research in Paraplegie.

The researchers found that wheelchair-bound study participants with spinal cord injuries perceived their body’s edges as being plastic and flexible to include the wheelchair, independent of time since their injury or experience with using a wheelchair. Patients with lower spinal cord injuries who retained upper body movement showed a stronger association of the wheelchair with their body than those who had spinal cord impairments in the entire body.

According to the authors, this suggests that rather than being thought of only as an extension of the immobile limbs, the wheelchairs had become tangible, functional substitutes for the affected body part. …

As I mentioned in a Jan. 30, 2013 posting,

There have been some recent legal challenges as to what constitutes one’s body (from The Economist article, You, robot? [you can find the article here: http://www.economist.com/node/21560986]),

If you are dependent on a robotic wheelchair for mobility, for example, does the wheelchair count as part of your body? Linda MacDonald Glenn, an American lawyer and bioethicist, thinks it does. Ms Glenn (who is not involved in the RoboLaw project) persuaded an initially sceptical insurance firm that a “mobility assistance device” damaged by airline staff was more than her client’s personal property, it was an extension of his physical body. The airline settled out of court.

According to the Mar. 6, 2013 news release on EurekAlert from the Public Library of Science (PLoS), the open access article by Pazzaglia and her colleagues can be found here (Note: I have added a link),

Pazzaglia M, Galli G, Scivoletto G, Molinari M (2013) A Functionally Relevant Tool for the Body following Spinal Cord Injury. PLOS ONE 8(3): e58312.doi:10.1371/journal.pone.0058312

At almost the same time as Pazzaglia’s work,  a “Mind-controlled Exoskeleton” is announced in a Mar. 7, 2013 news item on ScienceDaily,

Every year thousands of people in Europe are paralysed by a spinal cord injury. Many are young adults, facing the rest of their lives confined to a wheelchair. Although no medical cure currently exists, in the future they could be able to walk again thanks to a mind-controlled robotic exoskeleton being developed by EU-funded researchers.

The system, based on innovative ‘Brain-neural-computer interface’ (BNCI) technology — combined with a light-weight exoskeleton attached to users’ legs and a virtual reality environment for training — could also find applications in there habilitation of stroke victims and in assisting astronauts rebuild muscle mass after prolonged periods in space.

The Mar. 7, 2013 news release on CORDIS, which originated the news item, offers a description of the “Mindwalker” project,

‘Mindwalker was proposed as a very ambitious project intended to investigate promising approaches to exploit brain signals for the purpose of controlling advanced orthosis, and to design and implement a prototype system demonstrating the potential of related technologies,’ explains Michel Ilzkovitz, the project coordinator at Space Applications Services in Belgium.

The team’s approach relies on an advanced BNCI system that converts electroencephalography (EEG) signals from the brain, or electromyography (EMG) signals from shoulder muscles, into electronic commands to control the exoskeleton.

The Laboratory of Neurophysiology and Movement Biomechanics at the Université Libre de Bruxelles (ULB) focused on the exploitation of EEG and EMG signals treated by an artificial neural network, while the Foundation Santa Lucia in Italy developed techniques based on EMG signals modelled by the coupling of neural and biomechanical oscillators.

One approach for controlling the exoskeleton uses so-called ‘steady-state visually evoked potential’, a method that reads flickering visual stimuli produced at different frequencies to induce correlated EEG signals. Detection of these EEG signals is used to trigger commands such as ‘stand’, ‘walk’, ‘faster’ or ‘slower’.

A second approach is based on processing EMG signals generated by the user’s shoulders and exploits the natural arm-leg coordination in human walking: arm-swing patterns can be perceived in this way and converted into control signals commanding the exoskeleton’s legs.

A third approach, ‘ideation’, is also based on EEG-signal processing. It uses the identification and exploitation of EEG Theta cortical signals produced by the natural mental process associated with walking. The approach was investigated by the Mindwalker team but had to be dropped due to the difficulty, and time needed, in turning the results of early experiments into a fully exploitable system.

Regardless of which method is used, the BNCI signals have to be filtered and processed before they can be used to control the exoskeleton. To achieve this, the Mindwalker researchers fed the signals into a ‘Dynamic recurrent neural network'(DRNN), a processing technique capable of learning and exploiting the dynamic character of the BNCI signals.

‘This is appealing for kinematic control and allows a much more natural and fluid way of controlling an exoskeleton,’ Mr Ilzkovitz says.

The team adopted a similarly practical approach for collecting EEG signals from the user’s scalp. Most BNCI systems are either invasive, requiring electrodes to be placed directly into brain tissue, or require users to wear a ‘wet’ capon their head, necessitating lengthy fitting procedures and the use of special gels to reduce the electrical resistance at the interface between the skin and the electrodes. While such systems deliver signals of very good quality and signal-to-noise ratio, they are impractical for everyday use.

The Mindwalker team therefore turned to a ‘dry’ technology developed by Berlin-based eemagine Medical Imaging Solutions: a cap covered in electrodes that the user can fit themselves, and which uses innovative electronic components to amplify and optimise signals before sending them to the neural network.

‘The dry EEG cap can be placed by the subject on their head by themselves in less than a minute, just like a swimming cap,’ Mr Ilzkovitz says.

Before proceeding any further with details, here’s what the Mindwalker looks like,

© MINDWALKER (downladed from http://cordis.europa.eu/fetch?CALLER=OFFR_TM_EN&ACTION=D&RCN=10601)

© MINDWALKER (downloaded from http://cordis.europa.eu/fetch?CALLER=OFFR_TM_EN&ACTION=D&RCN=10601)

After finding a way to collect the EEG/EMG signals and interpret them, the researchers needed to create the exoskeleton (from the CORDIS news release),

The universities of Delft and Twente in the Netherlands proposed an innovative approach for the design of the exoskeleton and its control. The exoskeletonis designed to be sufficiently robust to bear the weight of a 100 kg adult and powerful enough to recover balance from external causes of instability such as the user’s own torso movements during walking or a gentle push from the back or side. Compared to other exoskeletons developed to date it is relatively light, weighing less than 30 kg without batteries, and, because a final version of the system should be self-powered, it is designed to minimise energy consumption.

The Mindwalker researchers achieved energy efficiency through the use of springs fitted inside the joints that are capable of absorbing and recovering some of the energy otherwise dissipated during walking, and through the development of an efficient strategy for controlling the exoskeleton.

Most exoskeletons are designed to be balanced when stationary or quasi-static and to move by little steps inside their ground stability perimeter, an approach known as ‘Zero moment point’, or ZMP. Although this approach is commonly used for controlling humanoid robots, when applied to exoskeletons, it makes them heavy and slow – and usually requires users to be assisted by a walking frame, sticks or some other support device when they move.

Alternatively, a more advanced and more natural control strategy can replicate the way humans actually walk, with a controlled loss of balance in the walking direction.

‘This approach is called “Limit-cycle walking” and has been implemented using model predictive control to predict the behaviour of the user and exoskeleton and for controlling the exoskeleton during the walk. This was the approach investigated in Mindwalker,’ Mr Ilzkovitz says.

To train users to control the exoskeleton, researchers from Space Applications Services developed a virtual-reality training platform, providing an immersive environment in which new users can safely become accustomed to using the system before testing it out in a clinical setting, and, the team hope, eventually using it in everyday life.

By the end of this year, tests with able-bodied trial users will be completed. The system will then be transferred to the Foundation Santa Lucia for conducting a clinical evaluation until May 2013 with five to 10volunteers suffering from spinal cord injuries. These trials will help identify shortcomings and any areas of performance improvement, the project coordinator says.

In the meantime, the project partners are continuing research on different components for a variety of potential applications. The project coordinator notes, for example, that elements of the system could be adapted for the rehabilitation of stroke victims or to develop easy-to-use exoskeletons for elderly people for mobility support.

Space Applications Services, meanwhile, is also exploring applications of the Mindwalker technology to train astronauts and help them rebuild muscle mass after spending long periods of time in zero-gravity environments.

There’s more about the European Commission’s Seventh Programme-funded Mindwalker project here.

Parallel with these developments in Europe, Miguel Nicolelis of Duke University has stated that he will have a working exoskeleton (Walk Again Project)  for the kickoff by a paraplegic individual for the opening of the World Cup (soccer/football) in Brazil in 2014. I mentioned Nicolelis and his work most recently in a Mar. 4, 2013 posting.

Taken together, this research which strongly suggests that people can perceive prostheses as being part of their bodies and exoskeletons that are powered by the wearer’s thoughts, we seem to be edging closer to a world where machines and humans become one.