Tag Archives: European Commission

Graphene Flagship high points

Leave a reply

The European Union’s Graphene Flagship project has provided a series of highlights in place of an overview for the project’s ramp-up phase (in 2013 the Graphene Flagship was announced as one of two winners of a science competition, the other winner was the Human Brain Project, with two prizes of 1B Euros for each project). Here are the highlights from the April 19, 2016 Graphene Flagship press release,

Graphene and Neurons – the Best of Friends

Flagship researchers have shown that it is possible to interface untreated graphene with neuron cells whilst maintaining the integrity of these vital cells [1]. This result is a significant first step towards using graphene to produce better deep brain implants which can both harness and control the brain.

Graphene and Neurons
 

This paper emerged from the Graphene Flagship Work Package Health and Environment. Prof. Prato, the WP leader from the University of Trieste in Italy, commented that “We are currently involved in frontline research in graphene technology towards biomedical applications, exploring the interactions between graphene nano- and micro-sheets with the sophisticated signalling machinery of nerve cells. Our work is a first step in that direction.”

[1] Fabbro A., et al., Graphene-Based Interfaces do not Alter Target Nerve Cells. ACS Nano, 10 (1), 615 (2016).

Pressure Sensing with Graphene: Quite a Squeeze

The Graphene Flagship developed a small, robust, highly efficient squeeze film pressure sensor [2]. Pressure sensors are present in most mobile handsets and by replacing current sensor membranes with a graphene membrane they allow the sensor to decrease in size and significantly increase its responsiveness and lifetime.

Discussing this work which emerged from the Graphene Flagship Work Package Sensors is the paper’s lead author, Robin Dolleman from the Technical University of Delft in The Netherlands “After spending a year modelling various systems the idea of the squeeze-film pressure sensor was formed. Funding from the Graphene Flagship provided the opportunity to perform the experiments and we obtained very good results. We built a squeeze-film pressure sensor from 31 layers of graphene, which showed a 45 times higher response than silicon based devices, while reducing the area of the device by a factor of 25. Currently, our work is focused on obtaining similar results on monolayer graphene.”

 

[2] Dolleman R. J. et al., Graphene Squeeze-Film Pressure Sensors. Nano Lett., 16, 568 (2016)

Frictionless Graphene


Image caption: A graphene nanoribbon was anchored at the tip of a atomic force microscope and dragged over a gold surface. The observed friction force was extremely low.

Image caption: A graphene nanoribbon was anchored at the tip of a atomic force microscope and dragged over a gold surface. The observed friction force was extremely low.

Research done within the Graphene Flagship, has observed the onset of superlubricity in graphene nanoribbons sliding on a surface, unravelling the role played by ribbon size and elasticity [3]. This important finding opens up the development potential of nanographene frictionless coatings. This research lead by the Graphene Flagship Work Package Nanocomposites also involved researchers from Work Package Materials and Work Package Health and the Environment, a shining example of the inter-disciplinary, cross-collaborative approach to research undertaken within the Graphene Flagship. Discussing this further is the Work Package Nanocomposites Leader, Dr Vincenzo Palermo from CNR National Research Council, Italy “Strengthening the collaboration and interactions with other Flagship Work Packages created added value through a strong exchange of materials, samples and information”.

[3] Kawai S., et al., Superlubricity of graphene nanoribbons on gold surfaces. Science. 351, 6276, 957 (2016) 

​Graphene Paddles Forward

Work undertaken within the Graphene Flagship saw Spanish automotive interiors specialist, and Flagship partner, Grupo Antolin SA work in collaboration with Roman Kayaks to develop an innovative kayak that incorporates graphene into its thermoset polymeric matrices. The use of graphene and related materials results in a significant increase in both impact strength and stiffness, improving the resistance to breakage in critical areas of the boat. Pushing the graphene canoe well beyond the prototype demonstration bubble, Roman Kayaks chose to use the K-1 kayak in the Canoe Marathon World Championships held in September in Gyor, Hungary where the Graphene Canoe was really put through its paces.

Talking further about this collaboration from the Graphene Flagship Work Package Production is the WP leader, Dr Ken Teo from Aixtron Ltd., UK “In the Graphene Flagship project, Work Package Production works as a technology enabler for real-world applications. Here we show the worlds first K-1 kayak (5.2 meters long), using graphene related materials developed by Grupo Antolin. We are very happy to see that graphene is creating value beyond traditional industries.” 

​Graphene Production – a Kitchen Sink Approach

Researchers from the Graphene Flagship have devised a way of producing large quantities of graphene by separating graphite flakes in liquids with a rotating tool that works in much the same way as a kitchen blender [4]. This paves the way to mass production of high quality graphene at a low cost.

The method was produced within the Graphene Flagship Work Package Production and is talked about further here by the WP deputy leader, Prof. Jonathan Coleman from Trinity College Dublin, Ireland “This technique produced graphene at higher rates than most other methods, and produced sheets of 2D materials that will be useful in a range of applications, from printed electronics to energy generation.” 

[4] Paton K.R., et al., Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids. Nat. Mater. 13, 624 (2014).

Flexible Displays – Rolled Up in your Pocket

Working with researchers from the Graphene Flagship the Flagship partner, FlexEnable, demonstrated the world’s first flexible display with graphene incorporated into its pixel backplane. Combined with an electrophoretic imaging film, the result is a low-power, durable display suitable for use in many and varied environments.

Emerging from the Graphene Flagship Work Package Flexible Electronics this illustrates the power of collaboration.  Talking about this is the WP leader Dr Henrik Sandberg from the VTT Technical Research Centre of Finland Ltd., Finland “Here we show the power of collaboration. To deliver these flexible demonstrators and prototypes we have seen materials experts working together with components manufacturers and system integrators. These devices will have a potential impact in several emerging fields such as wearables and the Internet of Things.”

​Fibre-Optics Data Boost from Graphene

A team of researches from the Graphene Flagship have demonstrated high-performance photo detectors for infrared fibre-optic communication systems based on wafer-scale graphene [5]. This can increase the amount of information transferred whilst at the same time make the devises smaller and more cost effective.

Discussing this work which emerged from the Graphene Flagship Work Package Optoelectronics is the paper’s lead author, Daniel Schall from AMO, Germany “Graphene has outstanding properties when it comes to the mobility of its electric charge carriers, and this can increase the speed at which electronic devices operate.”

[5] Schall D., et al., 50 GBit/s Photodetectors Based on Wafer-Scale Graphene for Integrated Silicon Photonic Communication Systems. ACS Photonics. 1 (9), 781 (2014)

​Rechargeable Batteries with Graphene

A number of different research groups within the Graphene Flagship are working on rechargeable batteries. One group has developed a graphene-based rechargeable battery of the lithium-ion type used in portable electronic devices [6]. Graphene is incorporated into the battery anode in the form of a spreadable ink containing a suspension of graphene nanoflakes giving an increased energy efficiency of 20%. A second group of researchers have demonstrated a lithium-oxygen battery with high energy density, efficiency and stability [7]. They produced a device with over 90% efficiency that may be recharged more than 2,000 times. Their lithium-oxygen cell features a porous, ‘fluffy’ electrode made from graphene together with additives that alter the chemical reactions at work in the battery.

Graphene Flagship researchers show how the 2D material graphene can improve the energy capacity, efficiency and stability of lithium-oxygen batteries.

Both devices were developed in different groups within the Graphene Flagship Work Package Energy and speaking of the technology further is Prof. Clare Grey from Cambridge University, UK “What we’ve achieved is a significant advance for this technology, and suggests whole new areas for research – we haven’t solved all the problems inherent to this chemistry, but our results do show routes forward towards a practical device”.

[6] Liu T., et al. Cycling Li-O2 batteries via LiOH formation and decomposition. Science. 350, 6260, 530 (2015)

[7] Hassoun J., et al., An Advanced Lithium-Ion Battery Based on a Graphene Anode and a Lithium Iron Phosphate Cathode. Nano Lett., 14 (8), 4901 (2014)

​Graphene – What and Why?

Graphene is a two-dimensional material formed by a single atom-thick layer of carbon, with the carbon atoms arranged in a honeycomb-like lattice. This transparent, flexible material has a number of unique properties. For example, it is 100 times stronger than steel, and conducts electricity and heat with great efficiency.

A number of practical applications for graphene are currently being developed. These include flexible and wearable electronics and antennas, sensors, optoelectronics and data communication systems, medical and bioengineering technologies, filtration, super-strong composites, photovoltaics and energy storage.

Graphene and Beyond

The Graphene Flagship also covers other layered materials, as well as hybrids formed by combining graphene with these complementary materials, or with other materials and structures, ranging from polymers, to metals, cement, and traditional semiconductors such as silicon. Graphene is just the first of thousands of possible single layer materials. The Flagship plans to accelerate their journey from laboratory to factory floor.

Especially exciting is the possibility of stacking monolayers of different elements to create materials not found in nature, with properties tailored for specific applications. Such composite layered materials could be combined with other nanomaterials, such as metal nanoparticles, in order to further enhance their properties and uses.​

Graphene – the Fruit of European Scientific Excellence

Europe, North America and Asia are all active centres of graphene R&D, but Europe has special claim to be at the centre of this activity. The ground-breaking experiments on graphene recognised in the award of the 2010 Nobel Prize in Physics were conducted by European physicists, Andre Geim and Konstantin Novoselov, both at Manchester University. Since then, graphene research in Europe has continued apace, with major public funding for specialist centres, and the stimulation of academic-industrial partnerships devoted to graphene and related materials. It is European scientists and engineers who as part of the Graphene Flagship are closely coordinating research efforts, and accelerating the transfer of layered materials from the laboratory to factory floor.

For anyone who would like links to the published papers, you can check out an April 20, 2016 news item featuring the Graphene Flagship highlights on Nanowerk.

Harmonized nano terminology for environmental health and safety

Leave a reply

According to Lynn Bergeson’s April 11, 2016 posting on Nanotechnology Now, the European Commission’s Joint Research Centre (JRC) has published a document about harmonizing terminology for environmental health and safety of nanomaterials,

The European Commission (EC) Joint Research Center (JRC) recently published a report entitled NANoREG harmonised terminology for environmental health and safety assessment of nanomaterials, developed within the NANoREG project: “A common European approach to the regulatory testing of nanomaterials.”

The NANoREG harmonised terminology for environmental health and safety assessment of nanomaterials (PDF)  has an unexpected description for itself on p. 8 (Note: A link has been removed),

Consistent  use  of  terminology  is  important  in  any  field  of  science  and  technology  to ensure  common  understanding  of  concepts  and  tools among  experts  and  different stakeholders, such as regulatory authorities, industry and consumers. Several  terms  in  the  field of  environmental  health  and  safety  (EHS)  assessment of nanomaterials  (hereinafter  NMs) have  been  indeed  defined  or  used  by  the  scientific community and various organisations, including   international   bodies,   European authorities, and industry associations.

This  is true  for multidisciplinary  projects  such  as  NANoREG, which  aims  at supporting regulatory  authorities, and  industry,  in  dealing  with EHS issues  of  manufactured NMs (‘nanoEHS’) (http://cordis.europa.eu/project/rcn/107159_en.html,www.nanoreg.eu). Terminology  thus  plays  an  important  role  in  NANoREG’s internal  process  of producing diverse types of output with regulatory relevance (e.g. physicochemical characterisation and test protocols, grouping and read-across approaches, exposure models, a framework for  safety  assessment  of NMs,  etc.). The  process  takes  place  in a  collaborative  effort across severalNANoREG work packages or tasks,  involvingquite a  few partners. Moreover,  the  different  types  of NANoREG output (‘deliverables’) are  addressed  to  a large  audience  of  scientists,  industry  and  regulatory  bodies,  extending beyond  Europe. Hence, a coordinated initiative has been undertaken by the Joint Research Centre (JRC) to harmonise the use of specific wording within NANoREG.

The objective of this JRC report is to disseminate the harmonised terminology that has been developed and used with in NANoREG. This collection of key terms has been agreed upon by all  project  partners and adopted  in  their  activities  and  related  documents, as recommended by the NANoREG internal Guidance Document.

Accordingly,  Section  2  of  the  report  illustrates  the  methodology  used  i)  to  select  key terms  that  form  the  ‘NANoREG  Terminology’,  ii)  to  develop  harmonised  ‘NANoREG Definitions’, and iii) it also explains the thinking that led to the choices made in drafting a  definition.  In  Section  3,  those  definitions, adopted  by  the  project  Consortium,  are reported  in  a  table  format  and  constitute  the  ‘NANoREG  Harmonised  Terminology’. Section 4 summarises the existing literature definitions that have been used as starting point to elaborate, for each key term, a NANoREG Definition. It also shortly discusses the reason(s) behind the choices that have been made in drafting a definition.

2. Methodology

The NANoREG Harmonised Terminology illustrated in this report is not a ‘dictionary’ [emphasis mine] that collects a long list of well-known, well-defined scientific and/or regulatory terms relevant to  the  field  of nanoEHS.  Rather,  the  NANoREG Harmonised  Terminology  focuses  on  a relatively short list of key terms that may be interpreted in various ways, depending on where the reader is located on the globe or on the reader’s scientific area of expertise. Moreover,  it  focuses  on  few  terms  that  are  specifically relevant  in  a  REACH [Registration, Evaluation, Authorization, & Restriction of Chemicals]  context, which represents the regulatory framework of reference for NANoREG.

This is having it both ways. As I read it, what they’re saying is this: ‘Our document is not a dictionary but here are the definitions we’re using and you can use them that way if you like’.

You can find a link to the ‘harmonisation’ document and one other related document on this page.

With over 150 partners from over 20 countries, the European Union’s Graphene Flagship research initiative unveils its work package devoted to biomedical technologies

Leave a reply

An April 11, 2016 news item on Nanowerk announces the Graphene Flagship’s latest work package,

With a budget of €1 billion, the Graphene Flagship represents a new form of joint, coordinated research on an unprecedented scale, forming Europe’s biggest ever research initiative. It was launched in 2013 to bring together academic and industrial researchers to take graphene from the realm of academic laboratories into European society in the timeframe of 10 years. The initiative currently involves over 150 partners from more than 20 European countries. The Graphene Flagship, coordinated by Chalmers University of Technology (Sweden), is implemented around 15 scientific Work Packages on specific science and technology topics, such as fundamental science, materials, health and environment, energy, sensors, flexible electronics and spintronics.

Today [April 11, 2016], the Graphene Flagship announced in Barcelona the creation of a new Work Package devoted to Biomedical Technologies, one emerging application area for graphene and other 2D materials. This initiative is led by Professor Kostas Kostarelos, from the University of Manchester (United Kingdom), and ICREA Professor Jose Antonio Garrido, from the Catalan Institute of Nanoscience and Nanotechnology (ICN2, Spain). The Kick-off event, held in the Casa Convalescència of the Universitat Autònoma de Barcelona (UAB), is co-organised by ICN2 (ICREA Prof Jose Antonio Garrido), Centro Nacional de Microelectrónica (CNM-IMB-CSIC, CIBER-BBN; CSIC Tenured Scientist Dr Rosa Villa), and Institut d’Investigacions Biomèdiques August Pi i Sunyer (IDIBAPS; ICREA Prof Mavi Sánchez-Vives).

An April 11, 2016 ICN2 press release, which originated the news item, provides more detail about the Biomedical Technologies work package and other work packages,

The new Work Package will focus on the development of implants based on graphene and 2D-materials that have therapeutic functionalities for specific clinical outcomes, in disciplines such as neurology, ophthalmology and surgery. It will include research in three main areas: Materials Engineering; Implant Technology & Engineering; and Functionality and Therapeutic Efficacy. The objective is to explore novel implants with therapeutic capacity that will be further developed in the next phases of the Graphene Flagship.

The Materials Engineering area will be devoted to the production, characterisation, chemical modification and optimisation of graphene materials that will be adopted for the design of implants and therapeutic element technologies. Its results will be applied by the Implant Technology and Engineering area on the design of implant technologies. Several teams will work in parallel on retinal, cortical, and deep brain implants, as well as devices to be applied in the periphery nerve system. Finally, The Functionality and Therapeutic Efficacy area activities will centre on development of devices that, in addition to interfacing the nerve system for recording and stimulation of electrical activity, also have therapeutic functionality.

Stimulation therapies will focus on the adoption of graphene materials in implants with stimulation capabilities in Parkinson’s, blindness and epilepsy disease models. On the other hand, biological therapies will focus on the development of graphene materials as transport devices of biological molecules (nucleic acids, protein fragments, peptides) for modulation of neurophysiological processes. Both approaches involve a transversal innovation environment that brings together the efforts of different Work Packages within the Graphene Flagship.

A leading role for Barcelona in Graphene and 2D-Materials

The kick-off meeting of the new Graphene Flagship Work Package takes place in Barcelona because of the strong involvement of local institutions and the high international profile of Catalonia in 2D-materials and biomedical research. Institutions such as the Catalan Institute of Nanoscience and Nanotechnology (ICN2) develop frontier research in a supportive environment which attracts talented researchers from abroad, such as ICREA Research Prof Jose Antonio Garrido, Group Leader of the ICN2 Advanced Electronic Materials and Devices Group and now also Deputy Leader of the Biomedical Technologies Work Package. Until summer 2015 he was leading a research group at the Technische Universität München (Germany).

Further Graphene Flagship events in Barcelona are planned; in May 2016 ICN2 will also host a meeting of the Spintronics Work Package. ICREA Prof Stephan Roche, Group Leader of the ICN2 Theoretical and Computational Nanoscience Group, is the deputy leader of this Work Package led by Prof Bart van Wees, from the University of Groningen (The Netherlands). Another Work Package, on optoelectronics, is led by Prof Frank Koppens from the Institute of Photonic Sciences (ICFO, Spain), with Prof Andrea Ferrari from the University of Cambridge (United Kingdom) as deputy. Thus a number of prominent research institutes in Barcelona are deeply involved in the coordination of this European research initiative.

Kostas Kostarelos, the leader of the Biomedical Technologies Graphene Flagship work package, has been mentioned here before in the context of his blog posts for The Guardian science blog network (see my Aug. 7, 2014 post for a link to his post on metaphors used in medicine).

Science advice conference in Brussels, Belgium, Sept. 29 – 30, 2016 and a call for speakers

Leave a reply

This is the second such conference and they are issuing a call for speakers; the first was held in New Zealand in 2014 (my April 8, 2014 post offers an overview of the then proposed science advice conference). Thanks to David Bruggeman and his Feb. 23, 2016 posting (on the Pasco Phronesis blog) for the information about this latest one (Note: A link has been removed),

The International Network for Global Science Advice (INGSA) is holding its second global conference in Brussels this September 29 and 30, in conjunction with the European Commission. The organizers have the following goals for the conference:

  • Identify core principles and best practices, common to structures providing scientific advice for governments worldwide.
  • Identify practical ways to improve the interaction of the demand and supply side of scientific advice.
  • Describe, by means of practical examples, the impact of effective science advisory processes.

Here’s a little more about the conference from its webpage on the INGSA website,

Science and Policy-Making: towards a new dialogue

29th – 30th September 2016, Brussels, Belgium

Call for suggestions for speakers for the parallel sessions

BACKGROUND:

“Science advice has never been in greater demand; nor has it been more contested.”[1] The most complex and sensitive policy issues of our time are those for which the available scientific evidence is ever growing and multi-disciplined, but still has uncertainties. Yet these are the very issues for which scientific input is needed most. In this environment, the usefulness and legitimacy of expertise seems obvious to scientists, but is this view shared by policy-makers?

OBJECTIVES:

A two-day conference will take place in Brussels, Belgium, on Thursday 29th and Friday 30th September 2016. Jointly organised by the European Commission and the International Network for Government Science Advice (INGSA), the conference will bring together users and providers of scientific advice on critical, global issues. Policy-makers, leading practitioners and scholars in the field of science advice to governments, as well as other stakeholders, will explore principles and practices in a variety of current and challenging policy contexts. It will also present the new Scientific Advice Mechanism [SAM] of the European Commission [emphasis mine; I have more about SAM further down in the post] to the international community. Through keynote lectures and plenary discussions and topical parallel sessions, the conference aims to take a major step towards responding to the challenge best articulated by the World Science Forum Declaration of 2015:

“The need to define the principles, processes and application of science advice and to address the theoretical and practical questions regarding the independence, transparency, visibility and accountability of those who receive and provide advice has never been more important. We call for concerted action of scientists and policy-makers to define and promulgate universal principles for developing and communicating science to inform and evaluate policy based on responsibility, integrity, independence, and accountability.”

The conference seeks to:

Identify core principles and best practices, common to structures providing scientific advice for governments worldwide.
Identify practical ways to improve the interaction of the demand and supply side of scientific advice.
Describe, by means of practical examples, the impact of effective science advisory processes.

The Programme Committee comprises:

Eva Alisic, Co-Chair of the Global Young Academy

Tateo Arimoto, Director of Science, Technology and Innovation Programme; The Japanese National Graduate Institute for Policy Studies

Peter Gluckman, Chair of INGSA and Prime Minister’s Chief Science Advisor, New Zealand (co-chair)

Robin Grimes, UK Foreign Office Chief Scientific Adviser

Heide Hackmann, International Council for Science (ICSU)

Theodoros Karapiperis, European Parliament – Head of Scientific Foresight Unit (STOA), European Parliamentary Research Service (EPRS) – Science and Technology Options Assessment Panel

Johannes Klumpers, European Commission, Head of Unit – Scientific Advice Mechanism (SAM) (co-chair)

Martin Kowarsch, Head of the Working Group Scientific assessments, Ethics and Public Policy, Mercator Research Institute on Global Commons and Climate Change

David Mair, European Commission – Joint Research Centre (JRC)

Rémi Quirion, Chief Scientist,  Province of Québec, Canada

Flavia Schlegel, UNESCO Assistant Director-General for the Natural Sciences

Henrik Wegener, Executive Vice President, Chief Academic Officer, Provost at Technical University of Denmark, Chair of the EU High Level Group of Scientific Advisors

James Wilsdon, Chair of INGSA, Professor of Research Policy, Director of Impact & Engagement, University of Sheffield
Format

The conference will be a combination of plenary lectures and topical panels in parallel (concurrent) sessions outlined below. Each session will include three speakers (15 minute address with 5 minute Q & A each) plus a 30 minute moderated discussion.

Parallel Session I: Scientific advice for global policy

The pathways of science advice are a product of a country’s own cultural history and will necessarily differ across jurisdictions. Yet, there is an increasing number of global issues that require science advice. Can scientific advice help to address issues requiring action at international level? What are the considerations for providing science advice in these contexts? What are the examples from which we can learn what works and what does not work in informing policy-making through scientific advice?

Topics to be addressed include:

Climate Change – Science for the Paris Agreement: Did it work?
Migration: How can science advice help?
Zika fever, dementia, obesity etc.; how can science advice help policy to address the global health challenges?

Parallel Session II: Getting equipped – developing the practice of providing scientific advice for policy

The practice of science advice to public policy requires a new set of skills that are neither strictly scientific nor policy-oriented, but a hybrid of both. Negotiating the interface between science and policy requires translational and navigational skills that are often not acquired through formal training and education. What are the considerations in developing these unique capacities, both in general and for particular contexts? In order to be best prepared for informing policy-making, up-coming needs for scientific advice should ideally be anticipated. Apart from scientific evidence sensu stricto, can other sources such as the arts, humanities, foresight and horizon scanning provide useful insights for scientific advice? How can scientific advice make best use of such tools and methods?

Topics to be addressed include:

How to close the gap between the need and the capacity for science advice in developing countries with limited or emerging science systems?
What skills do scientists and policymakers need for a better dialogue?
Foresight and science advice: can foresight and horizon scanning help inform the policy agenda?

Parallel Session III: Scientific advice for and with society

In many ways, the practice of science advice has become a key pillar in what has been called the ‘new social contract for science[2]’. Science advice translates knowledge, making it relevant to society through both better informed policy and by helping communities and their elected representatives to make better informed decisions about the impacts of technology. Yet providing science advice is often a distributed and disconnected practice in which academies, formal advisors, journalists, stakeholder organisations and individual scientists play an important role. The resulting mix of information can be complex and even contradictory, particularly as advocate voices and social media join the open discourse. What considerations are there in an increasingly open practice of science advice?

Topics to be addressed include:

Science advice and the media: Lost in translation?
Beyond the ivory tower: How can academies best contribute to science advice for policy?
What is the role of other stakeholders in science advice?

Parallel Session IV: Science advice crossing borders

Science advisors and advisory mechanisms are called upon not just for nationally-relevant advice, but also for issues that increasingly cross borders. In this, the importance of international alignment and collaborative possibilities may be obvious, but there may be inherent tensions. In addition, there may be legal and administrative obstacles to transnational scientific advice. What are these hurdles and how can they be overcome? To what extent are science advisory systems also necessarily diplomatic and what are the implications of this in practice?

Topics to be addressed include:

How is science advice applied across national boundaries in practice?
What support do policymakers need from science advice to implement the Sustainable Development Goals in their countries?
Science Diplomacy/Can Scientists extend the reach of diplomats?

Call for Speakers

The European Commission and INGSA are now in the process of identifying speakers for the above conference sessions. As part of this process we invite those interested in speaking to submit their ideas. Interested policy-makers, scientists and scholars in the field of scientific advice, as well as business and civil-society stakeholders are warmly encouraged to submit proposals. Alternatively, you may propose an appropriate speaker.

The conference webpage includes a form should you wish to submit yourself or someone else as a speaker.

New Scientific Advice Mechanism of the European Commission

For anyone unfamiliar with the Scientific Advice Mechanism (SAM) mentioned in the conference’s notes, once Anne Glover’s, chief science adviser for the European Commission (EC), term of office was completed in 2014 the EC president, Jean-Claude Juncker, obliterated the position. Glover, the first and only science adviser for the EC, was to replaced by an advisory council and a new science advice mechanism.

David Bruggemen describes the then situation in a May 14, 2015 posting (Note: A link has been removed),

Earlier this week European Commission President Juncker met with several scientists along with Commission Vice President for Jobs, Growth, Investment and Competitiveness [Jyrki] Katainen and the Commissioner for Research, Science and Innovation ]Carlos] Moedas. …

What details are publicly available are currently limited to this slide deck.  It lists two main mechanisms for science advice, a high-level group of eminent scientists (numbering seven), staffing and resource support from the Commission, and a structured relationship with the science academies of EU member states.  The deck gives a deadline of this fall for the high-level group to be identified and stood up.

…

… The Commission may use this high-level group more as a conduit than a source for policy advice.  A reasonable question to ask is whether or not the high-level group can meet the Commission’s expectations, and those of the scientific community with which it is expected to work.

David updated the information in a January 29,2016 posting (Note: Links have been removed),

Today the High Level Group of the newly constituted Scientific Advice Mechanism (SAM) of the European Union held its first meeting.  The seven members of the group met with Commissioner for Research, Science and Innovation Carlos Moedas and Andrus Ansip, the Commission’s Vice-President with responsibility for the Digital Single Market (a Commission initiative focused on making a Europe-wide digital market and improving support and infrastructure for digital networks and services).

Given it’s early days, there’s little more to discuss than the membership of this advisory committee (from the SAM High Level Group webpage),

Janusz Bujnicki

Professor, Head of the Laboratory of Bioinformatics and Protein Engineering, International Institute of Molecular and Cell Biology, Warsaw

Janusz Bujnicki

Professor of Biology, and head of a research group at IIMCB in Warsaw and at Adam Mickiewicz University, Poznań, Poland. Janusz Bujnicki graduated from the Faculty of Biology, University of Warsaw in 1998, defended his PhD in 2001, was awarded with habilitation in 2005 and with the professor title in 2009.

Bujnicki’s research combines bioinformatics, structural biology and synthetic biology. His scientific achievements include the development of methods for computational modeling of protein and RNA 3D structures, discovery and characterization of enzymes involved in RNA metabolism, and engineering of proteins with new functions. He is an author of more than 290 publications, which have been cited by other researchers more than 5400 times (as of October 2015). Bujnicki received numerous awards, prizes, fellowships, and grants including EMBO/HHMI Young Investigator Programme award, ERC Starting Grant, award of the Polish Ministry of Science and award of the Polish Prime Minister, and was decorated with the Knight’s Cross of the Order of Polonia Restituta by the President of the Republic of Poland. In 2013 he won the national plebiscite “Poles with Verve” in the Science category.

Bujnicki has been involved in various scientific organizations and advisory bodies, including the Polish Young Academy, civic movement Citizens of Science, Life, Environmental and Geo Sciences panel of the Science Europe organization, and Scientific Policy Committee – an advisory body of the Ministry of Science and Higher Education in Poland. He is also an executive editor of the scientific journal Nucleic Acids Research.

Curriculum vitae  PDF icon 206 KB

Pearl Dykstra

Professor of Sociology, Erasmus University Rotterdam

Pearl Dykstra

Professor Dykstra has a chair in Empirical Sociology and is Director of Research of the Department of Public Administration and Sociology at the Erasmus University Rotterdam. Previously, she had a chair in Kinship Demography at Utrecht University (2002-2009) and was a senior scientist at the Netherlands Interdisciplinary Demographic Institute (NIDI) in The Hague (1990-2009).

Her publications focus on intergenerational solidarity, aging societies, family change, aging and the life course, and late-life well-being. She is an elected member of the Netherlands Royal Academy of Arts and Sciences (KNAW, 2004) and Vice-President of the KNAW as of 2011, elected Member of the Dutch Social Sciences Council (SWR, 2006), and elected Fellow of the Gerontological Society of America (2010). In 2012 she received an ERC Advanced Investigator Grant for the research project “Families in context”, which will focus on the ways in which policy, economic, and cultural contexts structure interdependence in families.

Curriculum vitae  PDF icon 391 KB

Elvira Fortunato

Deputy Chair

Professor, Materials Science Department of the Faculty of Science and Technology, NOVA University, Lisbon

Elvira Fortunato

Professor Fortunato is a full professor in the Materials Science Department of the Faculty of Science and Technology of the New University of Lisbon, a Fellow of the Portuguese Engineering Academy since 2009 and decorated as a Grand Officer of the Order of Prince Henry the Navigator by the President of the Republic in 2010, due to her scientific achievements worldwide. In 2015 she was appointed by the Portuguese President Chairman of the Organizing Committee of the Celebrations of the National Day of Portugal, Camões and the Portuguese Communities.

She was also a member of the Portuguese National Scientific & Technological Council between 2012 and 2015 and a member of the advisory board of DG CONNECT (2014-15).

Currently she is the director of the Institute of Nanomaterials, Nanofabrication and Nanomodeling and of CENIMAT. She is member of the board of trustees of Luso-American Foundation (Portugal/USA, 2013-2020).

Fortunato pioneered European research on transparent electronics, namely thin-film transistors based on oxide semiconductors, demonstrating that oxide materials can be used as true semiconductors. In 2008, she received in the 1st ERC edition an Advanced Grant for the project “Invisible”, considered a success story. In the same year she demonstrated with her colleagues the possibility to make the first paper transistor, starting a new field in the area of paper electronics.

Fortunato published over 500 papers and during the last 10 years received more than 16 International prizes and distinctions for her work (e.g: IDTechEx USA 2009 (paper transistor); European Woman Innovation prize, Finland 2011).

Curriculum vitae  PDF icon 339 KB

Rolf-Dieter Heuer

Director-General of the European Organization for Nuclear Research (CERN)

Rolf-Dieter Heuer

Professor Heuer is an experimental particle physicist and has been CERN Director-General since January 2009. His mandate, ending December 2015, is characterised by the start of the Large Hadron Collider (LHC) 2009 as well as its energy increase 2015, the discovery of the H-Boson and the geographical enlargement of CERN Membership. He also actively engaged CERN in promoting the importance of science and STEM education for the sustainable development of the society. From 2004 to 2008, Prof. Heuer was research director for particle and astroparticle physics at the DESY laboratory, Germany where he oriented the particle physics groups towards LHC by joining both large experiments, ATLAS and CMS. He has initiated restructuring and focusing of German high energy physics at the energy frontier with particular emphasis on LHC (Helmholtz Alliance “Physics at the Terascale”). In April 2016 he will become President of the German Physical Society. He is designated President of the Council of SESAME (Synchrotron-Light for Experimental Science and Applications in the Middle East).

Prof. Heuer has published over 500 scientific papers and holds many Honorary Degrees from universities in Europe, Asia, Australia and Canada. He is Member of several Academies of Sciences in Europe, in particular of the German Academy of Sciences Leopoldina, and Honorary Member of the European Physical Society. In 2015 he received the Grand Cross 1st class of the Order of Merit of the Federal Republic of Germany.

Curriculum vitae  PDF icon

Julia Slingo

Chief Scientist, Met Office, Exeter

Julia Slingo

Dame Julia Slingo became Met Office Chief Scientist in February 2009 where she leads a team of over 500 scientists working on a very broad portfolio of research that underpins weather forecasting, climate prediction and climate change projections. During her time as Chief Scientist she has fostered much stronger scientific partnerships across UK academia and international research organisations, recognising the multi-disciplinary and grand challenge nature of weather and climate science and services. She works closely with UK Government Chief Scientific Advisors and is regularly called to give evidence on weather and climate related issues.

Before joining the Met Office she was the Director of Climate Research in NERC’s National Centre for Atmospheric Science, at the University of Reading. In 2006 she founded the Walker Institute for Climate System Research at Reading, aimed at addressing the cross disciplinary challenges of climate change and its impacts. Julia has had a long-term career in atmospheric physics, climate modelling and tropical climate variability, working at the Met Office, ECMWF and NCAR in the USA.

Dame Julia has published over 100 peer reviewed papers and has received numerous awards including the prestigious IMO Prize of the World Meteorological Organization for her outstanding work in meteorology, climatology, hydrology and related sciences. She is a Fellow of the Royal Society, an Honorary Fellow of the Royal Society of Chemistry and an Honorary Fellow of the Institute of Physics.

Curriculum vitae  PDF icon 239 KB

Cédric Villani

Director, Henri Poincaré Institute, Paris

Cédric Villani

Born in 1973 in France, Cédric Villani is a mathematician, director of the Institut Henri Poincaré in Paris (from 2009), and professor at the Université Claude Bernard of Lyon (from 2010). In December 2013 he was elected to the French Academy of Sciences.

He has worked on the theory of partial differential equations involved in statistical mechanics, specifically the Boltzmann equation, and on nonlinear Landau damping. He was awarded the Fields Medal in 2010 for his works.

Since then he has been playing an informal role of ambassador for the French mathematical community to media (press, radio, television) and society in general. His books for non-specialists, in particular Théorème vivant (2012, translated in a dozen of languages), La Maison des mathématiques (2014, with J.-Ph. Uzan and V. Moncorgé) and Les Rêveurs lunaires (2015, with E. Baudoin) have all found a wide audience. He has also given hundreds of lectures for all kinds of audiences around the world.

He participates actively in the administration of science, through the Institut Henri Poincaré, but also by sitting in a number of panels and committees, including the higher council of research and the strategic council of Paris. Since 2010 he has been involved in fostering mathematics in Africa, through programs by the Next Einstein Initiative and the World Bank.

Believing in the commitment of scientists in society, Villani is also President of the Association Musaïques, a European federalist and a father of two.

Website

Henrik C. Wegener

Chair

Executive Vice President, Chief Academic Officer and Provost, Technical University of Denmark

Henrik C. Wegener

Henrik C. Wegener is Executive Vice President and Chief Academic Officer at Technical University of Denmark since 2011. He received his M.Sc. in food science and technology at the University of Copenhagen in 1988, his Ph.D. in microbiology at University of Copenhagen in 1992, and his Master in Public Administration (MPA) form Copenhagen Business School in 2005.

Henrik C. Wegener was director of the National Food Institute, DTU from 2006-2011 and before that head of the Department of Epidemiology and Risk Assessment at National Food and Veterinary Research Institute, Denmark (2004-2006). From 1994-1999, he was director of the Danish Zoonosis Centre, and from 1999-2004 professor of zoonosis epidemiology at Danish Veterinary Institute. He was stationed at World Health Organization headquarters in Geneva from 1999-2000. With more than 3.700 citations (h-index 34), he is the author of over 150 scientific papers in journals, research monographs and proceedings, on food safety, zoonoses, antimicrobial resistance and emerging infectious diseases.

He has served as advisor and reviewer to national and international authorities & governments, international organizations and private companies, universities and research foundations, and he has served, and is presently serving, on several national and international committees and boards on food safety, veterinary public health and research policy.

Henrik C. Wegener has received several awards, including the Alliance for the Prudent Use of Antibiotics International Leadership Award in 2003.

That’s quite a mix of sciences and I’m happy to see a social scientist has been included.

Conference submissions

Getting back to the conference and its call for speakers, the deadline for submissions is March 25, 2016. Interestingly, there’s also this (from conference webpage),

The deadline for submissions is 25th March 2016. The conference programme committee with session chairs will review all proposals and select those that best fit the aim of each session while also representing a diverse range of perspectives. We aim to inform selected speakers within 4 weeks of the deadline to enable travel planning to Brussels.

To make the conference as accessible as possible, there is no registration fee. [emphasis mine] The European Commission will cover travel accommodation costs only for confirmed speakers for whom the travel and accommodation arrangements will be made by the Commission itself, on the basis of the speakers’ indication.

Good luck!

*Head for conference submissions added on Feb. 29, 2016 at 1155 hundred hours.

Back to the mortar and pestle for perovskite-based photovoltaics

Leave a reply

This mechanochemistry (think mortar and pestle) story about perovskite comes from Poland. From a Jan. 14, 2016 Institute of Physical Chemistry of the Polish Academy of Sciences press release (also on EurekAlert but dated Jan. 16, 2016),

Perovskites, substances that perfectly absorb light, are the future of solar energy. The opportunity for their rapid dissemination has just increased thanks to a cheap and environmentally safe method of production of these materials, developed by chemists from Warsaw, Poland. Rather than in solutions at a high temperature, perovskites can now be synthesized by solid-state mechanochemical processes: by grinding powders.

We associate the milling of chemicals less often with progress than with old-fashioned pharmacies and their inherent attributes: the pestle and mortar. [emphasis mine] It’s time to change this! Recent research findings show that by the use of mechanical force, effective chemical transformations take place in solid state. Mechanochemical reactions have been under investigation for many years by the teams of Prof. Janusz Lewinski from the Institute of Physical Chemistry of the Polish Academy of Sciences (IPC PAS) and the Faculty of Chemistry of Warsaw University of Technology. In their latest publication, the Warsaw researchers describe a surprisingly simple and effective method of obtaining perovskites – futuristic photovoltaic materials with a spatially complex crystal structure.

“With the aid of mechanochemistry we are able to synthesize a variety of hybrid inorganic-organic functional materials with a potentially great significance for the energy sector. Our youngest ‘offspring’ are high quality perovskites. These compounds can be used to produce thin light-sensitive layers for high efficiency solar cells,” says Prof. Lewinski.

Perovskites are a large group of materials, characterized by a defined spatial crystalline structure. In nature, the perovskite naturally occurring as a mineral is calcium titanium(IV) oxide CaTiO3. Here the calcium atoms are arranged in the corners of the cube, in the middle of each wall there is an oxygen atom and at the centre of the cube lies a titanium atom. In other types of perovskite the same crystalline structure can be constructed of various organic and inorganic compounds, which means titanium can be replaced by, for example, lead, tin or germanium. As a result, the properties of the perovskite can be adjusted so as to best fit the specific application, for example, in photovoltaics or catalysis, but also in the construction of superconducting electromagnets, high voltage transformers, magnetic refrigerators, magnetic field sensors, or RAM memories.

At first glance, the method of production of perovskites using mechanical force, developed at the IPC PAS, looks a little like magic.

“Two powders are poured into the ball mill: a white one, methylammonium iodide CH3NH3I, and a yellow one, lead iodide PbI2. After several minutes of milling no trace is left of the substrates. Inside the mill there is only a homogeneous black powder: the perovskite CH3NH3PbI3,” explains doctoral student Anna Maria Cieslak (IPC PAS).

“Hour after hour of waiting for the reaction product? Solvents? High temperatures? In our method, all this turns out to be unnecessary! We produce chemical compounds by reactions occurring only in solids at room temperature,” stresses Dr. Daniel Prochowicz (IPC PAS).

The mechanochemically manufactured perovskites were sent to the team of Prof. Michael Graetzel from the Ecole Polytechnique de Lausanne in Switzerland, where they were used to build a new laboratory solar cell. The performance of the cell containing the perovskite with a mechanochemical pedigree proved to be more than 10% greater than a cell’s performance with the same construction, but containing an analogous perovskite obtained by the traditional method, involving solvents.

“The mechanochemical method of synthesis of perovskites is the most environmentally friendly method of producing this class of materials. Simple, efficient and fast, it is ideal for industrial applications. With full responsibility we can state: perovskites are the materials of the future, and mechanochemistry is the future of perovskites,” concludes Prof. Lewinski.

The described research will be developed within GOTSolar collaborative project funded by the European Commission under the Horizon 2020 Future and Emerging Technologies action.

Perovskites are not the only group of three-dimensional materials that has been produced mechanochemically by Prof. Lewinski’s team. In a recent publication the Warsaw researchers showed that by using the milling technique they can also synthesize inorganic-organic microporous MOF (Metal-Organic Framework) materials. The free space inside these materials is the perfect place to store different chemicals, including hydrogen.

This research was published back in August 2015,

Mechanosynthesis of the hybrid perovskite CH3NH3PbI3: characterization and the corresponding solar cell efficiency by D. Prochowicz, M. Franckevičius, A. M. Cieślak, S. M. Zakeeruddin, M. Grätzel and J. Lewiński. J. Mater. Chem. A, 2015,3, 20772-20777 DOI: 10.1039/C5TA04904K First published online 27 Aug 2015

This paper is behind a paywall.

An open science policy platform for Europe and a technology programme for the arts community

Leave a reply

Thanks to David Bruggeman’s Dec. 8, 2015 posting on his Pasco Phronesis blog, I’ve gotten some details about the European Union’s (EU) Open Science Policy Platform and about a science, technology and arts programme to connect artists with scientists (Note: Links have been removed),

Recently the European Commission’s [EC] Directorate-General for Research and Development announced the development of an Open Science Policy Platform.  In the European Commission context, Open Science is one of its Digital Government initiatives, but this Policy Platform is not technical infrastructure.  It is a communications mechanism for stakeholders in open access, new digital tools for research and joint arts and research communities.

David goes on to contrast the open science situation in the US with the approach being taken in the EU. Unfortunately, I do not have  sufficient knowledge of the Canadian open science scene to offer any opinion.

Getting back to Europe, there is some sort of a government document from the EC’s Directorate-General for Research and Innovation (RTD [Research and Technological Development]) titled, New policy initiative: The establishment of an Open Science Policy Platform,

The Open Science Policy Platform will be governed by a Steering Group composed of top-leading individuals of (European) branch organisations with the required decision-power. DG RTD will seek to appoint individuals from the following stakeholder groups:

-universities;
-academies of science;
-research funding bodies;
-research performing organisations;
-Citizen Science;
-scientific publication associations;
-Open Science platforms and intermediaries;
-(research) libraries.

The Open Science Policy Platform will advise the Commission on the development and implementation  of open science policy on the basis of the draft European Open Science Agenda.

The steering group for this platform will be set up in early 2016 according to the undated document describing this new policy initiative.

Regarding the arts project mentioned earlier, it’s part of the European Union’s Digital Agenda for Europe, from the ICT (information and communication technology) and art – the StARTS platform webpage on the European Commission’s website,

Scientific and technological skills are not the only forces driving innovation. Creativity and the involvement of society play a major role in the innovation process and its endorsement by all. In this context, the Arts serve as catalysts in an efficient conversion of Science and Technology knowledge into novel products, services, and processes.

ICT can enhance our capacity to sense the world, but an artwork can reach audiences on intrinsic emotional levels.

The constant appropriation of new technologies by artists allows them to go further in actively participating in society. By using ICT as their medium of expression, artists are able to prototype solutions, create new products and make new economic, social and business models. Additionally, by using traditional mediums of expression and considering the potentials of ICT, they propose new approaches to research and education.

The European Commission recognised this by launching the Starts programme: Innovation at the nexus of Science, Technology and the Arts  (Starts) to foster the emergence of joint arts and research communities. It supported the ICT Art Connect study which lead the way to the StARTS initiative by revealing new evidence for the integration of the Arts as an essential and fruitful component within research and innovation in ICT.

A Call for a Coordination and support action (CSA) has been launched to boost synergies between artists, creative people and technologists under Horizon 2020 Work Programme 2016/17.

You can find out more on events that are taking place throughout Europe. Follow StARTS on Facebook or via #StartsEU.

You can find the Starts website here.

Novel food nanotechnology resistance

Leave a reply

The resistance is coming from the Nanotechnology Industries Association (NIA) and it concerns some upcoming legislation in the European Union. From a Sept. 24, 2015 news item on Nanowerk,

In October [2015], the European Union Parliament is expected to vote on legislation that repeals Regulation No 258/97 and replaces it with ‘Regulation on Novel Foods 2013/045(COD)’, which will fundamentally change how nanomaterials in food are regulated. The Nanotechnologies Industries Association has issued the following statement on the upcoming vote:

After reviewing the draft European legislation updating the ‘Regulation on Novel Foods 2013/045(COD)’, it has become clear to the Nanotechnology Industries Association and within the nanotech supply chain that the proposed changes are unworkable. It is vague, unclear and contradicts firmly established nanomaterial regulations that have been effectively used by European institutions for years. Implementing it will create new, unnecessary challenges for SMEs, the drivers of economic growth, aiming to use nanotechnology to improve the daily lives of Europeans.

A Sept 24, 2015 NIA press release, which originated the news item, outlines the concerns,

To include materials that are “composed of discrete functional parts….which have one or more dimensions of the order of 100 nm or less” fundamentally changes the accepted definition of engineered nanomaterials and risks countless products being caught in disproportional regulation. The term “discrete functional parts” adds further complexity as it has little scientific basis, opening it up to a wide range of interpretation when put into practice. This will drive innovators to avoid any products that could possibly be caught in this broad, unclear definition and, ultimately, consumers will miss out on the benefits.

Innovators that can overcome this uncertainty and continue to utilize cutting-edge nanomaterials, will then face a new requirement that their safety tests be ‘the most up-to-date’ – a vague term with no formal definition. This leaves companies subject to unpredictable changes in testing requirements with little notice, a burden no other industry faces.

Finally, if implemented, the text would require the European commission to change the definition of ‘engineered nanomaterial’ in the Food Information to Consumers Regulation. However, regulations cannot be updated overnight, which means companies will be faced with two parallel and competing definitions for an indeterminate period of time.

The Council claims that this regulation will ‘reduce administrative burdens,’ however, we believe it will achieve the opposite. Industry and innovators need regulation that is clear and grounded in science. It ensures they know when they are subject to nanomaterial regulations and are prepared to meet all the requirements. This approach provides them with predictability in regulations and assures the public that the nanomaterials used are safe. A conclusion all parties can welcome.

NIA urges Members of the European Parliament not to create uncertainty in a sector that is a leader in European innovation, and to engage in direct discussions with the European Commission, which is already working on a review of the European Commission Recommendation for a Definition of a Nanomaterial with the Joint Research Centre.

While it might be tempting to lambaste the NIA for resisting regulation of nanomaterials in foods, the organization does have a point. Personally, I would approach it by emphasizing that there has been a problem with the European Union definition for nanomaterials (issued in 2011) and that is currently being addressed by the Joint Research Centre (JRC), which has issued a series of three reports the latest being in July 2015. (Note: There have been issues with the European Union definition since it was first issued and it would seem more logical to wait until that matter has been settled before changing regulations.) From a July 10, 2015 JRC press release,

The JRC has published science-based options to improve the clarity and the practical application of the EC recommendation on the definition of a nanomaterial. This is the last JRC report in a series of three, providing the scientific support to  the Commission in its review of the definition used to identify materials for which special provisions might apply (e.g. for ingredient labelling or safety assessment).  The Commission’s review process continues, assessing the options against policy issues.

As the definition should be broadly applicable in different regulatory sectors, the report suggests that the scope of the definition regarding the origin of nanomaterials should remain unchanged, addressing natural, incidental and manufactured nanomaterials. Furthermore, size as the sole defining property of a nanoparticle, as well as the range of 1 nm to 100 nm as definition of the nanoscale should be maintained.

On the other hand, several issues seem to deserve attention in terms of clarification of the definition and/or provision of additional implementation guidance. These include:

  • The terms “particle”, “particles size”, “external dimension” and “constituent particles”.
  • Consequences of the possibility of varying the current 50% threshold for the particle number fraction (if more than half of the particles have one or more external dimensions between 1 nm and 100 nm the material is a nanomaterial): variable thresholds may allow regulators to address specific concerns in certain application areas, but may also confuse customers and lead to an inconsistent classification of the same material based on the field of application.
  • Ambiguity on the role of the volume-specific surface area (VSSA): The potential use of VSSA should be clarified and ambiguities arising from the current wording should be eliminated.
  • The methods to prove that a material is not a nanomaterial: The definition makes it very difficult to prove that a material is not a nanomaterial. This issue could be resolved by adding an additional criterion.
  • The list of explicitly included materials (fullerenes, graphene flakes and single wall carbon nanotubes even with one or more external dimensions below 1 nm): This list does not include non-carbon based materials with a structure similar to carbon nanotubes. A modification (or removal) of the current list could avoid inconsistencies.
  • A clearer wording in the definition could prevent the misunderstanding that products containing nanoparticles become nanomaterials themselves.

Many of the issues addressed in the report can be clarified by developing new or improved guidance. Also the need for specific guidance beyond clarification of the definition itself is identified. However, relying only on guidance documents for essential parts of the definition may lead to unintended differences in the implementation and decision making. Therefore, also possibilities to introduce more clarity in the definition itself are listed above and discussed in the report.

JRC will continue to support the review process of the definition and its implementation in EU legislation.

…

Here is an Oct. 18, 2011 posting where I featured some of the issues raised by the European Union definition.

Global overview of nano-enabled food and agriculture regulation

Leave a reply

First off, this post features an open access paper summarizing global regulation of nanotechnology in agriculture and food production. From a Sept. 11, 2015 news item on Nanowerk,

An overview of regulatory solutions worldwide on the use of nanotechnology in food and feed production shows a differing approach: only the EU and Switzerland have nano-specific provisions incorporated in existing legislation, whereas other countries count on non-legally binding guidance and standards for industry. Collaboration among countries across the globe is required to share information and ensure protection for people and the environment, according to the paper …

A Sept. 11, 2015 European Commission Joint Research Centre press release (also on EurekAlert*), which originated the news item, summarizes the paper in more detail (Note: Links have been removed),

The paper “Regulatory aspects of nanotechnology in the agri/feed/food sector in EU and non-EU countries” reviews how potential risks or the safety of nanotechnology are managed in different countries around the world and recognises that this may have implication on the international market of nano-enabled agricultural and food products.

Nanotechnology offers substantial prospects for the development of innovative products and applications in many industrial sectors, including agricultural production, animal feed and treatment, food processing and food contact materials. While some applications are already marketed, many other nano-enabled products are currently under research and development, and may enter the market in the near future. Expected benefits of such products include increased efficacy of agrochemicals through nano-encapsulation, enhanced bioavailability of nutrients or more secure packaging material through microbial nanoparticles.

As with any other regulated product, applicants applying for market approval have to demonstrate the safe use of such new products without posing undue safety risks to the consumer and the environment. Some countries have been more active than others in examining the appropriateness of their regulatory frameworks for dealing with the safety of nanotechnologies. As a consequence, different approaches have been adopted in regulating nano-based products in the agri/feed/food sector.

The analysis shows that the EU along with Switzerland are the only ones which have introduced binding nanomaterial definitions and/or specific provisions for some nanotechnology applications. An example would be the EU labelling requirements for food ingredients in the form of ‘engineered nanomaterials’. Other regions in the world regulate nanomaterials more implicitly mainly by building on non-legally binding guidance and standards for industry.

The overview of existing legislation and guidances published as an open access article in the Journal Regulatory Toxicology and Pharmacology is based on information gathered by the JRC, RIKILT-Wageningen and the European Food Safety Agency (EFSA) through literature research and a dedicated survey.

Here’s a link to and a citation for the paper,

Regulatory aspects of nanotechnology in the agri/feed/food sector in EU and non-EU countries by Valeria Amenta, Karin Aschberger, , Maria Arena, Hans Bouwmeester, Filipa Botelho Moniz, Puck Brandhoff, Stefania Gottardo, Hans J.P. Marvin, Agnieszka Mech, Laia Quiros Pesudo, Hubert Rauscher, Reinhilde Schoonjans, Maria Vittoria Vettori, Stefan Weigel, Ruud J. Peters. Regulatory Toxicology and Pharmacology Volume 73, Issue 1, October 2015, Pages 463–476 doi:10.1016/j.yrtph.2015.06.016

This is the most inclusive overview I’ve seen yet. The authors cover Asian countries, South America, Africa, and the MIddle East, as well as, the usual suspects in Europe and North America.

Given I’m a Canadian blogger I feel obliged to include their summary of the Canadian situation (Note: Links have been removed),

4.2. Canada

The Canadian Food Inspection Agency (CFIA) and Public Health Agency of Canada (PHAC), who have recently joined the Health Portfolio of Health Canada, are responsible for food regulation in Canada. No specific regulation for nanotechnology-based food products is available but such products are regulated under the existing legislative and regulatory frameworks.11 In October 2011 Health Canada published a “Policy Statement on Health Canada’s Working Definition for Nanomaterials” (Health Canada, 2011), the document provides a (working) definition of NM which is focused, similarly to the US definition, on the nanoscale dimensions, or on the nanoscale properties/phenomena of the material (see Annex I). For what concerns general chemicals regulation in Canada, the New Substances (NS) program must ensure that new substances, including substances that are at the nano-scale (i.e. NMs), are assessed in order to determine their toxicological profile ( Environment Canada, 2014). The approach applied involves a pre-manufacture and pre-import notification and assessment process. In 2014, the New Substances program published a guidance aimed at increasing clarity on which NMs are subject to assessment in Canada ( Environment Canada, 2014).

Canadian and US regulatory agencies are working towards harmonising the regulatory approaches for NMs under the US-Canada Regulatory Cooperation Council (RCC) Nanotechnology Initiative.12 Canada and the US recently published a Joint Forward Plan where findings and lessons learnt from the RCC Nanotechnology Initiative are discussed (Canada–United States Regulatory Cooperation Council (RCC) 2014).

Based on their summary of the Canadian situation, with which I am familiar, they’ve done a good job of summarizing. Here are a few of the countries whose regulatory instruments have not been mentioned here before (Note: Links have been removed),

In Turkey a national or regional policy for the responsible development of nanotechnology is under development (OECD, 2013b). Nanotechnology is considered as a strategic technological field and at present 32 nanotechnology research centres are working in this field. Turkey participates as an observer in the EFSA Nano Network (Section 3.6) along with other EU candidate countries Former Yugoslav Republic of Macedonia, and Montenegro (EFSA, 2012). The Inventory and Control of Chemicals Regulation entered into force in Turkey in 2008, which represents a scale-down version of the REACH Regulation (Bergeson et al. 2010). Moreover, the Ministry of Environment and Urban Planning published a Turkish version of CLP Regulation (known as SEA in Turkish) to enter into force as of 1st June 2016 (Intertek).

The Russian legislation on food safety is based on regulatory documents such as the Sanitary Rules and Regulations (“SanPiN”), but also on national standards (known as “GOST”) and technical regulations (Office of Agricultural Affairs of the USDA, 2009). The Russian policy on nanotechnology in the industrial sector has been defined in some national programmes (e.g. Nanotechnology Industry Development Program) and a Russian Corporation of Nanotechnologies was established in 2007.15 As reported by FAO/WHO (FAO/WHO, 2013), 17 documents which deal with the risk assessment of NMs in the food sector were released within such federal programs. Safe reference levels on nanoparticles impact on the human body were developed and implemented in the sanitary regulation for the nanoforms of silver and titanium dioxide and, single wall carbon nanotubes (FAO/WHO, 2013).

Other countries included in this overview are Brazil, India, Japan, China, Malaysia, Iran, Thailand, Taiwan, Australia, New Zealand, US, South Africa, South Korea, Switzerland, and the countries of the European Union.

*EurekAlert link added Sept. 14, 2015.

Scaling graphene production up to industrial strength

Leave a reply

If graphene is going to be a ubiquitous material in the future, production methods need to change. An Aug. 7, 2015 news item on Nanowerk announces a new technique to achieve that goal,

Producing graphene in bulk is critical when it comes to the industrial exploitation of this exceptional two-dimensional material. To that end, [European Commission] Graphene Flagship researchers have developed a novel variant on the chemical vapour deposition process which yields high quality material in a scalable manner. This advance should significantly narrow the performance gap between synthetic and natural graphene.

An Aug. 7, 2015 European Commission Graphene Flagship press release by Francis Sedgemore, which originated the news item, describes the problem,

Media-friendly Nobel laureates peeling layers of graphene from bulk graphite with sticky tape may capture the public imagination, but as a manufacturing process the technique is somewhat lacking. Mechanical exfoliation may give us pristine graphene, but industry requires scalable and cost-effective production processes with much higher yields.

On to the new method (from the press release),

Flagship-affiliated physicists from RWTH Aachen University and Forschungszentrum Jülich have together with colleagues in Japan devised a method for peeling graphene flakes from a CVD substrate with the help of intermolecular forces. …

Key to the process is the strong van der Waals interaction that exists between graphene and hexagonal boron nitride, another 2d material within which it is encapsulated. The van der Waals force is the attractive sum of short-range electric dipole interactions between uncharged molecules.

Thanks to strong van der Waals interactions between graphene and boron nitride, CVD graphene can be separated from the copper and transferred to an arbitrary substrate. The process allows for re-use of the catalyst copper foil in further growth cycles, and minimises contamination of the graphene due to processing.

Raman spectroscopy and transport measurements on the graphene/boron nitride heterostructures reveals high electron mobilities comparable with those observed in similar assemblies based on exfoliated graphene. Furthermore – and this comes as something of a surprise to the researchers – no noticeable performance changes are detected between devices developed in the first and subsequent growth cycles. This confirms the copper as a recyclable resource in the graphene fabrication process.

“Chemical vapour deposition is a highly scalable and cost-efficient technology,” says Christoph Stampfer, head of the 2nd Institute of Physics A in Aachen, and co-author of the technical article. “Until now, graphene synthesised this way has been significantly lower in quality than that obtained with the scotch-tape method, especially when it comes to the material’s electronic properties. But no longer. We demonstrate a novel fabrication process based on CVD that yields ultra-high quality synthetic graphene samples. The process is in principle suitable for industrial-scale production, and narrows the gap between graphene research and its technological applications.”

With their dry-transfer process, Banszerus and his colleagues have shown that the electronic properties of CVD-grown graphene can in principle match those of ultrahigh-mobility exfoliated graphene. The key is to transfer CVD graphene from its growth substrate in such a way that chemical contamination is avoided. The high mobility of pristine graphene is thus preserved, and the approach allows for the substrate material to be recycled without degradation.

Here’s a link to and citation for the paper,

Ultrahigh-mobility graphene devices from chemical vapor deposition on reusable copper by Luca Banszerus, Michael Schmitz, Stephan Engels, Jan Dauber, Martin Oellers, Federica Haupt, Kenji Watanabe, Takashi Taniguchi, Bernd Beschoten, and Christoph Stampfer. Science Advances  31 Jul 2015: Vol. 1, no. 6, e1500222 DOI: 10.1126/sciadv.1500222

This article appears to be open access.

For those interested in finding out more about chemical vapour deposition (CVD), David Chandler has written a June 19, 2015 article for the Massachusetts Institute of Technology (MIT) titled:  Explained: chemical vapor deposition (Technique enables production of pure, uniform coatings of metals or polymers, even on contoured surfaces.)

Outcomes for US-European Union bridging Nano environment, health, and safety (EHS) research workshop

Leave a reply

According to Lynn Bergeson in an April 14, 2015 news item on Nanotechnology Now, a US-European Union (EU) workshop on nanosafety has published a document,

The National Nanotechnology Initiative (NNI) published on March 23, 2015, the outcomes of the March 12-13, 2015, joint workshop held by the U.S. and the European Union (EU), “Bridging NanoEHS Research Efforts.” …

A US National Nanotechnology Initiative (NNI) ??, ??, 2015 notice on the nano.gov site provides more details,

Workshop participants reviewed progress toward COR [communities of research] goals and objectives, shared best practices, and identified areas for cross-COR collaboration.  To address new challenges the CORs were realigned and expanded with the addition of a COR on nanotechnology characterization. The seven CORs now address:

Characterization
Databases and Computational Modeling
Exposure through Product Life
EcoToxicity
Human Toxicity
Risk Assessment
Risk Management and Control

The CORs support the shared goal of responsible nanotechnology development as outlined in the U.S. National Nanotechnology Initiative EHS Research Strategy, and the research strategy of the EU NanoSafety Cluster. The CORs directly address several priorities described in the documents above, including the creation of a comprehensive nanoEHS knowledge base and international cooperation on the development of best practices and consensus standards.

The CORs are self-run, with technical support provided by the European Commission and the U.S. National Nanotechnology Coordination Office. Each Community has European and American co-chairs who convene meetings and teleconferences, guide the discussions, and set the group’s agenda. Participation in the CORs is free and open to any interested individuals. More information is available at www.us-eu.org.

The workshop was organized by the European Commission and the U.S. National Nanotechnology Initiative under the auspices of the agreement for scientific and technological cooperation between the European Union and the United States.

Coincidentally, I received an April 13, 2015 notice about the European Commission’s NanoSafety Cluster’s Spring 2015 newsletter concerning their efforts but found no mention of the ‘bridging workshop’. Presumably, information was not available prior to the newsletter’s deadline.

In my April 8, 2014 posting about a US proposed rule for reporting nanomaterials, I included information about the US and its efforts to promote or participate in harmonizing the nano situation internationally. Scroll down about 35% of the way to find information about the Canada-U.S. Regulatory Cooperation Council (RCC) Nanotechnology Initiative, the Organisation for Economic Cooperation and Development (OECD) effort, and the International Organization for Standardization (ISO) effort.